Restoration work of the remaining officers and Employees Quarters in district Mathura.

Amount

Dismantling of R.C.C Work with disposal of refuse within 60 m.

Dismantling Existing plaster including disposal or refuse with in a distance of 60m.

Dismantling of R.B Work with disposal of refuse within 60 m.

Dismantling of brick masonary in cement including staking of dismanntled material within a distance of 60 m.

E/W in excavation of foundation i/c lead up to 30 m and lift up to 1.50 m

Providing and laying C.C. 1:4:8 with cement, Coarse sand and stone grit (20-40 mm size) including cost of all material, labour and T&P etc.complete.

Brick work in Class-150 bricks in 1:4 cement and coarse sand mortar including supply of all material Labour, T&P etc.

Providing and laying D.P.C. 40 mm thick with cement concrete consisting of( 1:2:4) cement , Coarse sand and 10mm grade stone grit and including water proofing material as directed by the Engineer-In -Charge in the proportion as specified by the manufacturer.

Centering and fine ply wood or steel shuttering for R C C Work including supply of all material Labour, T&P etc (Complete language for all heights.)

Providing and laying steel reinforcement (T.M.T. bars) i/c cutting, bending, binding and supply of steel etc.

RCC Work in 1:1.5:3 cement, coarse sand,stone grit 10- 20 mm size including Labour, T&P and curing etc.

Painting top roofs with bitumen of approved quality @ 1.70 kg. Per Sq.M. impregnated with a cost of coarse sand @ 0.60 Cu.M. per 100 Sq. M. including cleaning the slab surface with a piece of cloth lately soaked in kerosene oil complete.

Providing and laying C.C. 1:2:4 with cement, Coarse sand and stone grit (10-20 mm size) including cost of all material, labour and T&P etc.complete.

Providing and laying Vitrified tiles in floor of 600*600mm sizes (thickness10mm) ,with water absorption less than 0.08% and confirming to IS : 15477, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, including grouting of joints.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Supply and fixing 30 mm thick commercial flush door(single leaf) shutters including cost of necesssary fittings and fixture and providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters

Fixing chowkhats in existing openingincluding embedding chowkhats in floor or walls cutting masonry for holdfasts,embedding hold fasts in cement concrete1;3;6(1 cement :3 coarse sand:6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping,all complete as per direction of Engineer -in - charge. For Door

Fixing chowkhats in existing openingincluding embedding chowkhats in floor or walls cutting masonry for holdfasts,embedding hold fasts in cement concrete1;3;6(1 cement :3 coarse sand:6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping,all complete as per direction of Engineer -in - charge. for window.

Providing & Fixing 1.00mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quantity conforming to IS : 2046 Type S,including cost of adhesive of approved quality.

Providing and fixing Bright finished brass 100mm mortice latch and lock ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc complete

Providing and fixing factory made Kitchen Cabinet Shutter/ Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:250 x 10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessaryscrews etc. complete: 125 mm

Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 5.5 mm thick float glass panes shutters of aluminium Z-section door,window and ventilator

Cement plaster 12.5 mm thick in 1:6 cement coarse sand mortar

Distempering Ist coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even sade over an including apriming coat cement primer of approved brand and manufacture such as Berger, J&N, Shalimar,Asian paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with Plaster of paris of approved synthetic material and sand papered smooth including cost of all materials.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete supply of all labour material and T&P required for proper completion of work for all heights.

Finishing Walls With acrylic smooth exeterior paint emulsion paint of required shade( Two or more coat applied @ 1.67 ltr/10 Sqm ) including one coat of primar applied @ 2.20Ltr/ 10 sqm coat curing and cost of all material , labour, T&P etc. required for proper completion of work for two coat.

Painting (Two) coat on New steel surface over priming coat on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux Specified brushing to give and even shade and including the cleaning the surface of all durt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.

S/F Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia.wire and 1.4mm wide aperture with matching wood beading etc complete.

Providing and laying I shaped precast interlocking tiles of thickness 80 mm (ordinary gray) i/c 25 mm thick local sand base levelling and dressing,filling joints with local sand etc.

Providing and fixing 110 mm dia PVC pipe conforming to IS make working pressure 6 Kg/Cm including testing labour T&P and all complete fittings

Constructing brick masonry chamber (600x 600x750mm) for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap .

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings 32 mm Flexible.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including cost of material, labour and T&P etc.

Providing and fixing C.P. brass Long body bib cock/ Angle Valve of approved quality conforming to IS:8931 15 mm nominal dia including cost of material, labour and T&P etc.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked whitesolid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S Trap, 10 litre low level white P.V.C. Flushing Cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Viterous China Orissa pattern W.C. pan of size 580x440 mm with internal type foot rests.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic mould frame of approved make and shade with 6 mm thick hard board backing rectangular shape 453 x 357 mm

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (15 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For Concealed work, including cutting chases and making good the wall etc)

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(15 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For External work exposed on walls)

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(20 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For External work exposed on walls)

Supply and Hoisting of sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes , labour and T&P etc. for proper completion of work. Tank should be ISI marked , Sintex or equivalent

Wiring point for light (Surface Conduit) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit and GP Box ,Modular switch and ceiling rose/angle/ batten holder etc. complete in all respect, as directed .

Wiring point for fan /fresh air fan (Surface Conduit) (light duty exhaust fan) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit ,GP Box, Modular type switch & ceiling rose etc, complete in all respect.

Wiring Point for plug (Surface Conduit) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit , GP Box and Modular type switch and socket etc. complete in all respect.

Wiring point for call bell (Surface Conduit) with 1.5 sq. mm.FRLSH PVCinsulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit on surface, complete with 14 SWG copper earth continuity wire ,GP Box , and Modular type bell push or 2 pin socket etc. complete in all respect.

Supply and fixing of power plug with 20 Amp./250 (Surface Conduit) volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work

Supply and fixing of Electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work

Invertor Wiring in wiring Point for light/ Fan/ Plugwith 1.5 mm Cu Wire

S&F surface/flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve

S&F of 40 Amp. SPMCB (10KA)C Curve C

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work

Submain in conduit on surface (2.5 sq. mm.)Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia. heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire. etc, complete in all respect.

Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 Watt. to 50 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA

M/S PRADEEP ASSOCIATES

M/S D.A.P.L ASSOCIATES