REPAIR TO STORM WATER DRAIN, CULVERT, DRAIN COVER AND OTHER MISC WORKS AND CERTAIN B/R REPAIRS AND JOINERY TO OFFRS QTRS/ MNS QTRS AT CHAF BANGALORE

Amount

M & L for cement concrete Type c2 1:3:6 ( 40 mm graded aggregate) in foundations , filing and mass concrete all as specified and as directed.

M&L for PCC (1:3:6) type-C1 using (20 mm graded broken stone as in surface channel and drain incl. necessary form work all as specified and as directed.

M &L for providing cement concrete type B1,1:2:4 (20 mm graded aggregate) as in copings including formwork all as specified and as directed.

M&L for Cement concrete 1:3:6 type C0 using 12.50mm graded stone aggregate incl weathering slightly rounded or chamfered angles and throating all as specified and as directed.

M & L Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) in plinth protections and similar works inculding necessary form works all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) set in cement mortar (1:6) all as specified and directed.

M&L for precast RCC 1:2:4 type B1 as in manhole cover including necessary form work set in cement mortar 1:4 all as specified and as directed.

M&L for extra fair forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement, including forms, moulds, mitred/stopped ends etc all as specified and as directed.

Forming jambs,with cement mortar 1:6 etc., to openings (to foregoing item), including cutting, toothing and properly bonding into Old unserviceable work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

M&L Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cm 1;6 all as specified and directed.

S & F 30 mm thick First class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats

S&F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers supplied and fitted to chowkats

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and stacking at site where directed.

Taking down shutters of any description not exceeding 1 Sq. M each and stacking at site where directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and stacking at site where directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 sqm each and refixing in same opening complete as directed.

Easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc. all complete all specified .

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix in repairs mild steel barrel tower bolts 100mm, stove enameled black, with bright bolt all as specified and as directed..

Supply and fix in repairs mild steel barrel tower bolts 150mm, stove enameled black, with bright bolt all as specified and as directed.

Supply only mild steel barrel tower bolts 200mm, stove enameled black, with bright bolt all as specified and as directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section all as specified and as directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section all as specified and as directed.

Supply and fix in repairs aluminium, anodized, barrel tower bolts 100mm of extruded section all as specified and as directed.

Supply and fix in repairs aluminium, anodized, barrel tower bolts 150mm of extruded section all as specified and as directed.

Supply and fix in repairs aluminium, anodized, barrel tower bolts 200mm of extruded section all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy all as specified and as directed.

Supply and fix in repairs aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long all as specified and as directed.

All as per item No 30 here-in-before but 250 mm long all as specified and as directed.

Supply and fix in repairs MS butt hinges, 50mm medium weight, cold rolled mild steel, and fixed all as specified and as directed.

Supply and fix in repairs MS butt hinges, 75mm medium weight, cold rolled mild steel, and fixed all as specified and as directed.

Supply and fix in repairs MS butt hinges, 100mm medium weight, cold rolled mild steel all as specified and as directed.

Supply only anodised extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, 100mm size all as specified and as directed.

S/F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed all as specified and as directed.

S/F 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed all as specified and as directed.

Supply and fix in repairs mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fix in repairs mild steel pressed handles 100mm, oval type, stove enameled black all as specified and as directed.

Supply and fix in repairs mild steel pressed handles 125mm, oval type, stove enameled black all as specified and as directed.

Supply and fix in repairs mild steel pressed handles 150mm, oval type, stove enameled black all as specified and as directed.

Supply and fix in repairs aluminium handles, cast type, anodized 100mm all as specified and as directed.

Supply and fix in repairs aluminium handles, cast type, anodized 150mm all as specified and as directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, incl plates and two keys, incl cutting holes into existing pressed steel frames, all as specified and as directed.

S&F in repiars 125mm aluminium anodised Hasp and staple, safety type fixed with screws complete all as specified and as directed

Supply & fix in repairs 20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets all as specified and as directed.

Supply & fix in repairs curtain rods brackets aluminium annodised powder coated fixed all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges in repairs all as specified and directed.

S&F in repairs Door closer hydraulically Aluminium (extruded section) regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and as directed.

Supply and fixing in repairs Cast iron body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg all as specified and as directed.

S&F in repairs floor door stopper aluminum alloy and touge, anodised over all length of cover plate 140mm, with hard drawn steel spring all as specified and directed.

Supply and fixing in repairs stainless steel wire cloth,0 .36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S & F Alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and as directed.

S&F in repairs sliding locks suitable for sliding window shutters all as specified and as directed.

Supply only rubber beading suitable for fixing glass panes to aluminum door shutters all as specified and as directed.

Supply only neoprene beading suitable for fixing glass panes to aluminum door shutters all as specified and as directed.

Supply only pivot hinges suitable for aluminium door shutters all as specified and as directed.

S&F in repairs only pivot hinges suitable for stainless steel door shutters, fixed in repairs all as specified and as directed.

S&F Aluminium alloy extruded handle, anodised, cast type 150mm size suitable for aluminum door/window shutters, fixed in repairs all as specified and directed.

S&F in repairs Steel windows/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay, complete with glazing bars, devetailed or welded incl painting with one shop coat of zinc chromate primer all as specified and directed.

All as item No 62 but without glazing bars all as specified and as directed.

S&F in repairs aluminium sheet of thickness 0.60mm & height 900mm all as specified and directed.

Taking down existing aluminium door shutters area n exc 1.5 sqm each and carrying out necessary servicing incl greasing/oiling etc, for smooth functioning and taking down unserviceable hardwares and replacing with new hardwares and re-fixing the door shutters in position all as specified and as directed. Notes :- Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

Taking down existing steel window/ventilator shutters area n exc 1 sqm each and carrying out necessary servicing incl mild steel box type hinges, mild steel handles, nuts, bolts washersa and welding/greasing/oiling etc for smooth functioning and taking down unserviceable hardwares and refixing with new hardwares and re fixing the window shutters in position all as specified and directed. Note :- (a) Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule. (b) Windows are to be fixed upto 6 storeys of buildings

Supply and fix in repairs mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers, fixed in repairs all as specified and directed.

S & F Mild steel works in fencing post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming toFe-290 Gde E-165 all as specified and as directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending etc and binding with mild steel wire not less than 0.9mm dia or securing with clips all as specified and as directed.

S&F for Pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and as directed.

Supply only chain link fencing any size all as specified and as directed.

Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts all as specified and as directed.

M&L in repairs 9mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc complete all as specified and directed. Note : Clips wherever required shall be measured and paid seperately under respective items of this schedule.

M&L in repairs 19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including beading complete all as specified and directed.

M&L for granite (of any type) stone slab 20 mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing over 10mm thick backing coat of dado/skirting/platform on fair faces of Brick/concrete surfaces in CM 1:4 etc complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4 type B2 (40mm graded aggregate) as in floor finishines & pavings even and smooth without using extra cement all as specified and as directed.

M&L for cement concrete type C-1, 1:3:6 (20mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base all as specified and as directed.

M&L for 25 mm thick Cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in levelling concrete finished even and fair to recive floor finshes,all as directed

M&L for 40 mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floorings all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M & L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match all as specified and as directed.

M&L for coloured Non -skid ceramic tiles 7 to 8mm thick (square /rectagular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed in CM (1:6), 15 mm thick complete all as specified and directed.

M & L for Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for coloured rubberised chequered cement concrete tiles of size 300mm x 300mm x 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for 60mm thick coloured rubberised machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-35 Grade laid over 25mm thick sand cushioning layer and grouted with dry sand all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting all as specified and as directed.

Taking down cement plaster on brick or concrete or stone walls/ceiling including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of stone masonry surfaces in cement morter 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even etc complete all as specified and as directed.

M&L rendering 5 mm thick in cement mortar 1:3 on ceiling of any surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.

M&L for preparing new plastered surface of walls and applying three coats of white wash complete all as specified and as directed

M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint all as specified and as directed.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane all as specified and as directed.

Supply and fix 5.5 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 SqM in each pane all as specified and as directed.

Supply and fix 4 mm thick frosted glass panes, fixed with necessary glazing clips, in squares exceeding 0.5 SqM in each pane all as specified and as directed.

S&F 4.00 mm thick figured glass, pin type , glazing with oil putty in square in each pane all as specified and directed.

Supply and fix 5 mm thick tinted glass panes, fixied with necessary glazing clips, in squares exceeding 0.5 SqM in each pane all as specified and as directed.

Hacking out old broken glass (any thickness , size ,quality or description), from wooden frame glazed putty or fixed with beads all as specified and as directed. .

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer all as specified and as directed.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed.

M&L for preparation of old treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality ) complete all as specified and as directed.

S & F in repairs 15mm dia. Bib tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked all as specified and fixed complete

S & F in repairs 15mm dia.Stop valve standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked all as specified and fixed complete

S&F in repairs brass NRV 15mm (Horizontal) all as specified and directed.

S&F in repairs brass NRV 15mm (vertical) all as specified and directed.

S&F in repairs 110mm pvc traps 'P' or 'S'

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe with seat cover etc. complete all as specified and as directed.

M&L in repairs 32mm dia. PVC waste pipe for WHB 60cm long with union all as specified and as directed.

M&L welding mild steel members of thickness n exc 6mm as in repairs, welds n exc 2.5cm in length all as specified and as directed.

S&F in repairs stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall as directed etc complete all as specified and as directed

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 450 mm size including cutting for and pinning ends of brackets or erecting stand all as specified and as directed.

Taking up and down steel tubing and down steel water tubing and connections including cleaning for re-fixing or removal 15 mm bore all as specified and directed. Note:- Cutting chases in wall/ floor for removal of concealed water tubing as necessary shall be measured and paid seperately.

All as per item No 120 but 20mm bore

All as per item No 120 but 25mm bore

Refixing old steel tubing and connections in new or old position (wall, ceiling or floor) 15 mm dia GI tube obtained from SL item No 120 above all as specified and directed.

All as per item No 123 above but for 20 mm bore obtained from Sl item No 121 above.

All as per item No 123 above but for 25 mm bore obtained from Sl item No 122 above.

Cutting existing steel tubing for addition or alteration(each cutting will be measured) 15mm bore all as specified and as directed.

All as per item No 126 but 20mm bore.

All as per item No 126 but 25mm bore

S&F Mild steel water tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F Mild steel water tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F Mild steel water tubes, 25 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F 500 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing water tank all as specified in SSR Part I and directed.

All as per item No 132 here-in-before but 1000 ltrs capacity

Supply and fixed in repairs bib taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, 15mm bore all as specified and as directed.

All as per item No 134 above but chromium plated.

All as per item No 134 above but fancy type chromium plated.

All as per item No 134 above but long body of approved quality and make.

Supply and fixed in repairs pillar taps cast copper alloy, with capstain head, chromium plated screwed down high pressure with or with out lettered hot or cold with long screw shanks and fly nuts screwed for iron pipe 15mm bore all as specified and as directed.

Supply and fixed in repairs stop valves, cast copper alloys, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed of 15 mm bore all as specified and as directed.

All as per item No 139 here-in-before but fancy type chromium plated.

All as per item No 139 here-in-before but fancy type chromium plated with long shank and cup (concealed type).

Supply and fixed in repairs gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed specified and as directed.

15mm bore

20mm bore

25mm bore

Supply and fixed in repairs ball brass valve high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

20mm bore

25mm bore

Supply and fixed in repairs waste fittings, brass chromium plated for glazed ware sinks basin etc with long screwed shanks and flynuts flanged and bedded in red lead cement and other ends fixed all as specified and as directed.

32mm bore

40mm bore

S&F waste coupling for stainless steel sink 75mm size, fixed in repairs, all as specified and as directed

S&F waste coupling for stainless steel sink 100mm size, fixed in repairs, all as specified and as directed

S&F in repairs 15mm PVC connection 45 cm long between ends with PTMT nut and washer all as specified and as directed.

S&F in repiars PVC connection PTMT 600mm long between ends with PTMT nuts and washers all as specified and directed.

S&F in repairs PVC flexible pipe(wastepipe) suitable for 32 mm waste coupling all as specified and as directed.

S&F in repairs PVC flexible pipe(wastepipe) suitable for 40 mm waste coupling all as specified and as directed.

S&F in repairs 10 Ltrs capacity PVC valveless syphonic action type flushing cistern, low level with suitable size pipe, 10 ltrs capacity all as specified and as directed.

Supply and fixed in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern all as specified and as directed.

S&F in repairs brass chromium plated shower rose with or without swivel joints 75mm size including fixing to steel pipe or union 15 mm bore all as specified and directed.

S&F in repairs syphon set for PVC flushing cistern all as specified and as directed.

S&F in repairs PVC/plastic handle for flushing cistern all as specified and as directed.

S&F in repairs plastic water closet seat cover white colour closed pattern with flat botton and cover & MS chromium plated or aluminium hinges/device all as specified and directed.

All as per item No 156 here-in-before but but coloured closet seat cover

Repairs to tap any type including changing of spindle/rubber washer etc if required all as specified and as directed. Notr :- Spindle will be measure separately and paid at supply rate only.

Bib taps

Pillar taps

Stop cock

Concealed stop cock

Supply only spindle brass suitable all as specified and as directed for :-

Bib taps

Pillar taps

Stop cock

Concealed stop cock

S&F in repair wash basin vitreous china white flat back of size 550x400mm including brass chromium plated pillar tap 15mm size, cast copper alloy with capstan head, brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old one all as specified and directed.

S & F in repair Health faucet brass chromium plated with flexible pipe, one GI Tee and one angle cock brass chromium plated 15 mm bore all as specified and as directed.

S&F in repair bathroom cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall as directed.

S&F fixed in repairs, Stain less steel soap dish of approved make, all as specified and as directed.

S&F fixed in repairs, stainless steel toilet paper holder of approved make all as specified and as directed.

S&F in repairs PVC float valve for use in PVC flushing cistern suitable for 20 mm bore inlet all as specified and as directed.

Taking down existing vitreous china wash basins of any description and size alongwith brackets and refixing the same wash basin in new or old position with and including new rag bolts of suitable size and making good the disturbed surfaces to match with the adjacent surfaces all as specified and as directed.

Demolition brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of debris to outside of MD area all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed.

Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses all as specified and directed.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemical,rendering and making good of existing brick/ concrete surfaces up to 6th storey all as specified and as directed.

M/S Suresh Raju

K V RAJANNA