Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.1 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹51.2 L+₹3.1 L (6.43%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹51.6 L+₹3.4 L (7.13%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹51.7 L+₹3.6 L (7.50%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹52.1 L+₹4.0 L (8.22%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹46.2 L
EMD Value
₹92,300
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim 737102
SPL REPAIRS TO BLDG NOS. T-55 T-82 T-83 T-118 OR LINE AND Q OFFICE AND PROVN OF QTY 40 GEYSERS 25 LTRS FOR BLDG NO. OPT-66 OPT-08 OPT-09 OPT-10 T-152 T-159 T-393 OPT-05 OPT-06 AND T-55 AT OLD CANTT AREA UNDER GE GANGTOK
2022_MES_541085_3
8066AE8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹92,300
Yes
17 Dec 2022
12 Nov 2022
14 Dec 2022
14 Nov 2022
12 Dec 2022
20 Nov 2022
Amount
Dismantling Plain or Corrugated Steel Sheeting/ Galvalume sheet of any gauge and thickness including Nainital,sikkim or similar Roof Coverings, complete all as specified and as directed.
Dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets complete all as specified and as directed.
Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed..
Demolition of brickwork or stone/boulder masonary built in cement mortar including all quoins, arches, pillars, precast PCC bond stones including separating serviceable stones/boulders & setting aside for reuse in the work and removal of unserviceable materials from site complete all as specified and directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.
Supply and fix 0.45mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.
All as per item No 9 here-in -before but except sheeting
M&L preparation of old zinc or galvanised surfaces of any description over 10cm in width or girth not otherwise described by coating with moderate solution to receive painting and applying one coat of synthatic enamel paint complete all as specified and as directed.
All as per item No 11 but two coat of synthatic enamel paint complete all as specified and as directed.
M&L for precast cement concrete block massonary of 1:3:6 type C1 using 20 mm graded stone aggregate exe 10 CM width and setting in CM morter 1:6 complete all as specified and directed.
Material & labour for rendering 15mm thick on block/brick or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified.
M&L for rendering 20mm thick in cement mortar (1:4) in two layer of 10mm thick each with using WPC shall be mixed with cement mortar in finishing outer layer only as per manufacturer's instruction, on other than fair face of brick/stone masonry (external surfaces) finished surface fair and even without using extra cement complete all as specified and as directed. Note : (WPC shall be measured and paid separately as supply only)
M&L 20mm thick rendering plaster on fair faces of stone masonry surfaces or other than fair face of brick work in CM 1:6 complete all as specified and as directed.
M&L for chequred cement concrete tiles 20cm x 20cm x 25mm/30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with greu cement and pigments over and incl 20mm thick screed bed or bedding layer of CM 1:6 all as specified.
M&L for plum concrete consisting of PCC 1:3:6 type C2 (using 40mm graded stone aggregate) mixed with 25% of plums of stone boulders (Basalt,trap or any other approved) of size 200 to 300mm all as specified as in wall complete all as specified and as directed. Note- For measurement, qty of boulders will be deducted from total volume of concrete and same will be paid separately in supply only.
Supply only stone boulders (Basalt trap or any other approved) of size 200 to 300mm complete all as specified and as directed.
Use and waste formwork to faces of walls, retaining walls, abutments, parapets and staircase, railing and similar work including attached pillasters, buttresses etc vertical or to better in rough finished surfaces complete all as specified and as directed.
M&L for preparation of new plaster surfaces and applying two coats of acrylic washable distemper on walls over a coat of alkali resistance pimer complete as specified and directed.
M&L Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of wall primer complete all as specified and directed.
S&F 8/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, corner cove,F/J edge trims where required fixed with hidden screws to and including steel/wooden frame work of width 75 mm complete all as specified and as directed.
Suply and fix 4mm thick Non asbestos fibre cement building boards (E- board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion distemper over a coat of primer including preparation of surfaces complete all as per manufacturers instructions specifed and directed by the Engr-in -Charge.
S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partition of 600x600mm size fixed to walls with rawl plugs and screws and hanged to roof with and including 1.18 mm dia GI wire suspender of suitable length and buterfly clips, size of main tee shall be 23mmx 28mmx 0.30mm thick, cross tee shall be 24x 23x .30 mm thick and wall angle shall be 20mmx20mmx0.30mm thick complete all as specified and directed.
S&F in repaired aluminium power coated fancy curtain rails plain or colour 20 to 25 mm dia as approved with teak wook finishing brackets and knobs complete all as specified.
S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partitions of 600mm x 600mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 23mm x 28mm x 0.30mm thick, cross tee shall be 23mm x 28mm x 0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick complete all as specified and as directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match,over and Incuding15 mm thick screed bed with CM 1:6 complete in floor for receive the tiles complete all as specified and as directed.
Materials & labour for coloured glazed ceramic tiles of size (350 mm x 250 mm / 450 mm x 350 mm x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
S&F Mild steel butt hinges 100mm long, medium weight, cold rolled. complete all as specified and directed.
S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.
S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised. complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 150mm long, of extruded section. complete all as specified and directed.
S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing complete all as specified & directed.
S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing Complete all as specified and directed.
S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay including a shop coat of primer complete all as specified and as directed.
S&F 3 mm thick Sheet glass,ordinary qualityand glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed .
M&L for hardcore of guage n.exc 0.63mm broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified & as directed.
M&L for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate ) as in plinth protection; path / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed by the Engr-in-Charge.
M&L Extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and directed by the Engr-in-Charge.
S&F in repair snow white/ivory vitreous china wash hand basin 630x510x180mm with padestal including CP waste coupling complete all as specified and as directed. (Make : ESSCO Cat No WHE-WHT-183L or equivalent as approved.)
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by the Engr-in-Charge.
S&F in repair 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) all complete as specified and as directed.
S&F soap dish chromium plated body and polycarbonate brackets including wall flange and screws etc complete all as specified and as directed. Make : ESSCO Cat Part No. AEC-1133 or equivalent approved.
M&L for 15mm dia steel tubing medium grade galvanised with allfitting fixed complete to walls and ceiling or floor complete all as specified and as directed
Taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key, scrubbing down with water etc.complete all as specified and as directed
Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling expanded metal, any thickness or mesh, fixed with steel or wooden fillets, if any complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
Supply only integral water proofing compound.
S&F expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanized steel staples supplied and fixed complete to wood or steel members n.exc 4 kg/sqm in wt complete all as specified and as directed.
M&L for Vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm of light shade in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match in floor over & incl 15mm th screed bed in CM 1:6 complete all as specified and as directed.
M&L for mild steel rolled sections conforming to Fe - 410W (Gde E-250) as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.
M&L Factory Made 30mm thick Plain Framed, Panelled Shutter (Two Panel) with Lock Rail and Panel of 9mm BWP, Commercial Ply or 12mm Veneered Particle Board with commercial veneering on both faces having size of Rails and Stiles as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fitted to Wooden Chowkat, complete all as specified and as directed.
S&F powder coated aluminium sliding window frames of size 65mm x 38mm x 1 mm thick or appropriate section and shutter of section 20mm x 40mm x 1 mm or appropriate equivalent section including fixed with 5 mm thick tinted sheet glass with rubber gasket, handle, locking arrangement incl all necessary fittings complete all as specified & directed.
S & F in repaire Door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new/old wall surfaces complete all as specified and directed.
M & L for applying two coats of synthetic enamel paint on new or previously untreated or old steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.
Material & labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for colimns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. complete all as specified & as directed.
Material & labour for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & as directed.
Material and labour for walling of random rubble, brougt upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including laying PVC pipe in weep holes complete all as specified and as directed.
M&L PCC 1:2:4 type B0(using 12.5 mm graded stone aggregate) as in coping including weathering slightly rounded or chamfered angles and trotting complete all as specified and as directed.
Supply and fixing 0.63mm thick plain, galvanised, mild steel sheeting, with 275 grams per sqm zinc coating as in ridges, hips, valley gutters, drip & straight flashing etc complete all as specified and directed.
M&L for reinforced cement concrete (Nominal mix) type B1 (1:2:4) 20mm graded stone aggregate as in slab,landings,balconies,canopies,deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of form work to soffits of suspended slab such as cover slab, roof slabs, floor slabs, landing and similar works exceeding 200mm thick for flat fair finished surfaces of concerete complete all as specified and as directed.
Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.
M&L RCC (1:2:4) nominal mix using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed
Use and waste Formwork to sides of concrete foundation, footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation & similar works, vertical of to batter, rough finished surfaces of concrete flat.
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store completed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints etc fixed with wall as rainwater pipe etc all as specified and as directed.
M&L for point wiring with 2.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25mm size PVC non metallic casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick backelite sheet fixed with brass screws & cup washers including 2.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch/DB's or common earth dolly complete for geyser point, power point controlled by one switch 15/16 AMP one way complete all as specified and directed.
Supply, installation, testing and commissioning of electirc water heater, storage vertical type, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank or superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of pressure relief valve and grouting bolts suitably flushed to wall or any orther surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified.Make : - Havells Cat No - Monza DX : GHWBMGSWH0550 or equivalent approved.
M&L for 15mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed by Engr-in-Charge
S&F 15mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make : ESSCO Cat Part No. MQT 516KN or equivalent approved make.
Supply and fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for unions and fixed of size 15mm, complete all as specified and directed by Engr-in Charge
Supply and fix stop connection 15mm size with PTMT nut of length 750mm, complete all as specified and directed by Engr-in-Charge
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, inlcuding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
Taking down carefully by unscrewing from boards/outlet boxes, DBs, main switch etc complete all as specified and as directed.
Taking down MCB of any type or rating and keeping aside complete all as specified and as directed.
M&L for point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC (FRLS) insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with multistranded copper conductor in including PVC heavy grade 25mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/recatangular block/box of suitable size covered with 3mm thick bakolite sheet fixed by means of brass machine screw and cap washer including size 1.5 sqmm (nomnal cross sectionl area PVC (FRLS) insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DBs or common earth dolly for light/fan point controlled by one switch, one way 5/6 AMP one way complete all as specified and directed for the following .
All as per item No. 84 here-in-above but with 1.5 Sqmm copper conductor with 1.5 Sqmm stranded earth wire for 5 Amps switch socket point 5/6 AMP onin independent board.
All as per item No. 84 here-in-above but with 4.0 Sqmm copper conductor with 4.0 Sqmm earth stranded wire for 16 Amps power point in independent board.
S&F LED lights fitting 1x 18W, 220V, ,4 feet long,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed (Make : Havells Cat No LUMILINE+BS18WLED830SPCSS or equivalent of approved make)
S&F LED lights fitting 1x 10W, 220V, AC ,2 feet long,decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed (Make : Havells Cat No LUMILINE+BS10WLED865SPCSS or equivalent of approved make)
S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed. Make : Anchor Product Code No 39527 or equivalent of approved make
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V of size 250mm sweep with, blades and frame and louvers complete all as specified and as directed.
Supply and fix integrated LED bulk head fittings of 10 watts, presure die cast housing acrylic diffuser and frame with IP 66 protection complete all as specified and as directed .Make Havells Cat Part No.HEXAFT10WLED857SSYMBOPC or equivalent of approved make
S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed (Make : Havells Cat No PLUTOSURFACE4X1PLS34WLED857S or equivalent of approved make)
S&F switch piano flush button,single pole,one way(ISI marked), 6 amps complete all as specified and as directed. Make : Anchor or equivalent of approved make
S&F switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed including taking down old one. Make : Anchor or equivalent of approved make
S&F switch socket combination 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete complete all as directed including taking down old one.
S&F ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed Make : Anchor Product Code No 39040 or equivalent of approved make
S&F sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete and including taking down old DB with MCB complete all as specified and as directed.vells/ABB/Legrand) (Make : L&T cat No DBSPN008DD or equivalent of approved make
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB10060C to BB10320C or equivalent of approved make)
S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB20630C or equivalent of approved make)
S&F exhaust fan 300mm sweep, 1400 RPM, 240 volts, AC 50 HZ, metal body,copper wounds, with and including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement mortar complete all as specified and as directed. (Make : Havells Turbo Force SP, white or equivalent of Almonard/CG/Bajaj/Usha).
M&L concealedfor sub main wiring with 2 run of 6 sqmm PVC insulated unsheathed single core cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 2.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn in and including PVC heavy grade suitable size rigid non-metallic conduit complete all as specified and as directed.Note:- Two run of sub main wiring cable along with one run of earth wire and conduit shall be measured as one length.
Supply, Laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables conforming to IS 7098(Part-I)-1988, heavy duty with aluminium stranded conductor laid in trenches or passing through pipe of cross sectional area 16 sqmm 2 core with all fixing & connecting accessories complete all as specified & as directed. Note:- (i) Earthwork & Excavation, Protection required if any etc shall be measured and paid separately under relevant items of this schedule. (ii) The rate quoted by the bidder shall deemed to be inclusive of the cost of aluminium thimbles/lugs glands, terminal of suitable sizes."
Excavation trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying/repairs to LT electric cable and getting out in any soft soil all as specified by Engr-in-charge
Returning and filling in excavated soil including spreading, leveling, watering and well ramming in layers not exe 25cm all as directed
Removing surplus excavated soil not exceeding 50m and depositing where directed at level not exceeding 1.5m above starting point.
Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia MS bars etc complete all as specified and as directed including testing on completion.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .