PROVISION OF FALSE CEILING WITH POP FINISH, PROVISION OF WINDOW ROLLER BLINDS, ALUMINIUM SLIDING SHUTTER WITH FRAMES, WORK SERVICES FOR EXTENSION OF ENTRANCE PORTICO AT ICGAS RATNAGIRI AND PROVISION OF GRANITE CLADDING WITH SS NAME PLATE AT ICGS RAT

Amount

S & F of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre. complete all as specified and as directed.

S & F of Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous board with putty finish) to flat surface for any sunk or raised moulding (Decorative and Intricate designs and colour as approved by Engr-in-charge) over Aluminium/GI frame workk or II class soft wood fillets and reinforced with G.I. wire mesh (Aluminium/GI frame workk or II class soft wood fillets shall be paid separately) complete all as specified and as directed.

M&L for preparation of new putty surfaces and applying three coats of plastic emulsion paint over a coat of interior ceiling primer complete all as specified and as directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing of flexible LED strips 24 watt per 5 meter with uniform light distribution and long lasting adhesive for perfect cove lighting solution, LED strip 6000/4000K including driver.

S &F sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 single core 1.5Sqmm, earth continuity conductor of size 1.5 Sqmm to be drawn through in and incluidng PVC conduit fixed on wall/roof/floors all as directed by Engineer in Charge. Note: Two wires of 1.5 sqmm and one wire of 1.5 sqmm PVC conduit shall be measured as one unit.

S & F of folding/rolling blinds of size 1.80 x 1.50 m for windows of sizes 1.50 x 1.20 m having blinds (set of two/double blinds) made of non shrinkable double abric zebra pattern, design, texture as approved by Eng-in-charge having dust proof, UV resistance, medium opacity, PVC cord mechanism for rise and fall, sturdy top and bottom Aluminium tubular rails, equipped with cord tensioner to keep the cord tight against unwanted pull & unforeseen entangle especially for office use, including mounting and fixing of hardwares such as pulling cord, blind shade, brackets, screws & fishers for hassle free installation complete all as specified and as directed.

S & F of folding/rolling blinds of size 1.30 x 1.50 m for windows of sizes 1.00 x 1.20 m having blinds (set of two/double blinds) made of non shrinkable double fabric zebra pattern, design, texture as approved by Eng-in-charge having dust proof, UV resistance, medium opacity, PVC cord mechanism for rise and fall, sturdy top and bottom Aluminium tubular rails, equipped with cord tensioner to keep the cord tight against unwanted pull & unforeseen entangle especially for office use, including mounting and fixing of hardwares such as pulling cord, blind shade, brackets, screws & fishers for hassle free installation complete all as specified and as directed.

S & F of folding/rolling blinds of size 0.90 x 1.50 m for windows of sizes 0.60 x 1.20 m having blinds (set of two/double blinds) made of non shrinkable double fabric zebra pattern, design, texture as approved by Eng-in-charge having dust proof, UV resistance, medium opacity, PVC cord mechanism for rise and fall, sturdy top and bottom Aluminium tubular rails, equipped with cord tensioner to keep the cord tight against unwanted pull & unforeseen entangle especially for office use, including mounting and fixing of hardwares such as pulling cord, blind shade, brackets, screws & fishers for hassle free installation complete all as specified and as directed.

S & F of folding/rolling blinds of size 0.8 x 1.80 m for windows of sizes 0.50 x 1.50 m having blinds (set of two/double blinds) made of non shrinkable double fabric zebra pattern, design, texture as approved by Eng-in-charge having dust proof, UV resistance, medium opacity, PVC cord mechanism for rise and fall, sturdy top and bottom Aluminium tubular rails, equipped with cord tensioner to keep the cord tight against unwanted pull & unforeseen entangle especially for office use, including mounting and fixing of hardwares such as pulling cord, blind shade, brackets, screws & fishers for hassle free installation complete all as specified and as directed.

S & F of folding/rolling blinds of size 2.10 x 1.50 m for window glazing having blinds (set of two/double blinds) made of non shrinkable double fabric zebra pattern, design, texture as approved by Eng-in-charge having dust proof, UV resistance, medium opacity, PVC cord mechanism for rise and fall, sturdy top and bottom Aluminium tubular rails, equipped with cord tensioner to keep the cord tight against unwanted pull & unforeseen entangle especially for office use, including mounting and fixing of hardwares such as pulling cord, blind shade, brackets, screws & fishers for hassle free installation complete all as specified and as directed.

S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections, three or four track section, appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, wheel section for sliding etc. all complete as per architectural drawings and colour, texture of the powder coatings as per the directions of Engineer-in-Charge.

S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, wheel section for sliding etc. all complete as per architectural drawings and colour, texture of the powder coatings as per the directions of Engineer-in-Charge.

S & F of Aluminium composite panel (ACP) AL 33D havnig 3-4mm thick sheet panel with 0.3mm aluminium coil thickness aluminium alloy AA3105 of approved texture (veneered pattern) and colour by Engr-in-charge for Interior/exterior applications such as wall claddings, partitions, sign board fixed on MS/SS frame work by riveting/screwing or with bolts and nuts at 300mm c/c including filling the joints of each panel with silicone gel to match the colour of ACP panels for superior fininsh all along the periphery all as specified and as directed.

S & F of sheet glass 5.5mm thick and glazing with provided with aluminium cleats for securing in squares exc 0.5 sq. m in each pane.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.

S & F mortice locks vertical type size 100mm (2 lever made of brass) including fixing to doors/windows complete all as specified and as directed.

S&F of Aluminium alloy, anodised, sliding door bolt 150mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F of Butt hinges,100mm sizes extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&Fof Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

M&L for MS plates Fe 410 Gd E250 quality A in roof trusses (framed) trussed, etc connecting with bolts/welding as baseplates/connecting plates etc complete all as specified and as directed.

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on surfaces of any description over 10cm in girth not otherwise described complete all as specified and as directed.

M & L for SS-304 silver/brass glossy finish engraving fonts for the nonmenclature "COAST GUARD ENROLLED PERSONNEL RESIDENTIAL AREA" having min font height of 200mm and min 25 mm projection (depth) from claddings, embedded on 5 mm thick milky white PU acrylic sheet on the rear side for illumination of LEDs, each letters with min 15-20 Nos of LEDs encased to get complete water resistance, LEDs of make samsung, philips or its equivalent having min warranty of 05 years from the date of installation including fixing with SS screws to the walls/granite claddings and all electrical fitting and fixtures complete all as specified and as directed.

M & L for SS-304 silver/brass glossy finish engraving fonts for the logo of "COAST GUARD ENROLLED PERSONNEL RESIDENTIAL AREA" having min height of 900mm and min width 750mm with 25mm projection (depth) from claddings, embedded on 5mm thick milky white PU acrylic sheet on the rear side for illumination of LEDs, each letters with min 15-20 Nos of LEDs encased to get complete water resistance, LEDs of make samsung, philips or its equivalent having min warranty of 05 years from the date of installation incluidng fixing with SS screws to the walls/granite claddings and all electrical fitting and fixtures to ensure commisioning of lights from the nearest available power sources. Complete all as specified and as directed.

M & L for SS-304 silver/brass glossy finish engraving fonts for the nonmenclature "तटरक्षक नामांकित कार्मिक आवासीय क्षेत्र" having min font height of 200mm and 25mm projection (depth) from claddings, embedded/sandwiched on 5mm thick milky white PU acrylic sheet on the rear side for indulging illumination of LEDs, each letters with min 15-20 Nos of LEDs encased to get complete water resistance, LEDs of makes samsung, philips or its equivalent having min warranty of 05 years from the date of installation (Including comprehensive warranty for entire circuits) incluidng fixing with SS screws to the walls/granite claddings and all electrical fitting and fixtures to ensure commisioning of lights from the nearest available power sources. Complete all as specified and as directed.

M & L for SS-304 silver/brass glossy finish engraving fonts for the logo of "तटरक्षक नामांकित कार्मिक आवासीय क्षेत्र" having min height of 900mm and min width 750mm with 25mm projection (depth) from claddings, embedded on 5mm thick milky white PU acrylic sheet on the rear side for illumination of LEDs, each letters with min 15-20 Nos of LEDs encased to get complete water resistance, LEDs of make samsung, philips or its equivalent having min warranty of 05 years from the date of installation incluidng fixing with SS screws to the walls/granite claddings and all electrical fitting and fixtures to ensure commisioning of lights from the nearest available power sources. Complete all as specified and as directed.

M & L for machine cut laterite stone masonry wall exc 10cm in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

M & L for 20mm thick Granite (of any type) tiles machine cut as in wall cladding laid over cement screed and jointed with grey cement slurry including mixing of Aralite adhesive or equivalent for proper bonding of stone slabs on walls, pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, colour and shades of granite as approved by Eng-in-charge compelete all as specified.

M & L for rounding to edges of granite and marble stone slabs one edge, such as in copings, steps, cooking platform, and other similar situations complete all as specified and as directed.

M & L for rendering 20 mm thick with cement mortar 1:4 on fair faces of laterite stone masonry or concrete surfaces rough finished to receive as backing coat to wall tiling, dado/ wall cladding etc. complete all as specified and as directed.

M/S DUBAL CONSTRUCTION

K M SUBHANAIAH

KIRAN TRADERS

Advait Enterprises

m/s Pravin s Bhosale

M/S jvsr constructions

M/s. R.S. LAWANDE

STAR FABRICATION

M/S P S BABU

U k Enterprises