MAINTENANCE OF BLDGS INTERNAL SERVICES INTERNAL WATER SUPPLY SANITARY FITTINGS CLEANING OF WATER TANKS AND REPAIRS TO SUNKEN FLOOR COMPOUND WALL BARBED WIRE CHAIN LINK FENCING AND SECURITY GATE AT VARIOUS PLACES UNDER AGE BR II OF GE AF MARATHAHALLI

Amount

Demolition of Cement concrete in ground floors and pavings n exc 15cm thickness (below the ground level) cement concrete unreinforced complete all as specified and as directed

Demolition of Cement concrete above ground floors as in sunken floors of toilets etc exc 15 cm thick complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in plinth protection and paving finishing cone surface even and smooth without using extra cement complete all as specified and as directed

M&L for PCC (1:2:4) type B-0 using 12.50mm graded aggregate as in kerbs, copings, padding cement concrete to bring the slops towards spouts in sunken floors etc complete all as specified and as directed

M&L for water proof plastering to bottom and sides of sunken floors in CM 1:3, 15mm thick surface finished even and smooth but using extra cement complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed

S&F 40mm bore HDPE pipe as in spout pipes in sunken floors complete all as specified and as directed

M&L for application of two coats of blown bitumen to concrete/wall surfaces applied hot of grade 85/25 at the rate of 1.5Kg/Sqm per coat conforming to IS 702 over a coat of primer complete all as specified and as directed

S & F 3 to 4mm thick APP based polymeric membrane minium weight 3 Kg/Sqm and minium 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/Sqm) land on printed surface by force application complete all as specified and as directed

M&L for PCC 1:4:8 lean concrete type D2 40mm graded aggregate as in filling of sunken floors complete all as specified and as directed

Dismatling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for non skid coloured ceramic tiles 7mm thick of size 300mX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick using cement mortar 1:6 complete all as specified and as directed

M&L for glazed coloured wall tiles of 300X200X6mm as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10mm thick cement plaster in 1:4 as backing coat complete all as specified and as directed

M&L for Pre polished chequred cement concrete tiles of size 30cm x 30cm x 25mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortor 1:4 complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed

M & L for rendering 15mm thick in CM (1:4) on brick and concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and as directed.

All as per item no. 17 above, but, 20 mm dia bore complete all as specified and as directed

Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note: Serviceable tubing shall be obtained from item No. 17 here in before)

All as per item no 18 above, but, 20 mm dia bore complete all as specified and as directed

S&F for GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete all as specified and as directed

All as per item no 21 above, but, but 20 mm dia bore complete all as specified and as directed

S&F of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fitting fixed complete to walls, ceiling or laid in floors etc including short length , with all pipe fittings such as ends, elbow, unions, tee, reducing tees etc. including taking down complete all as specified and as directed

All as per item no 23 above, but, 20 mm dia complete all as specified and as directed

All as per item no 23 above, but, 25 mm dia complete all as specified and as directed

M&L for Rotational moulded polyethylene water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position including taking down the old tank complete all as specified and as directed

All as per item no 26 above, but,1000 ltrs capacity complete all as specified and as directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed.

S&F in repair Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and as directed

S&F in repair 15mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed

S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and as directed

S&F in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed.

S&F in repair 15 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

All as per item No 34 above,but, 20 mm dia complete all as specified and directed.

All as per item No 34 above, but, 25 mm dia complete all as specified and directed.

S&F in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

S&F Grating 150mmx150mm made out of stainless steel complete all as specified and directed.

S&F in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all as specified and as directed

S&F in repair PVC EWC anti microbial seat cover hygenic type for padestral pattern including all fitting complete all as specified and directed.

S&F in repair soap dish (Any Type) fixed to wall with brass chromium plated screws complete all as specified and directed.

S&F in repairs chromium plated toilet paper holder complete all as specified and as directed

S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia complete all as specified and as directed

S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete all as specified and as directed

S&F in repair round moulded PVC water tank lid for specially 500 Ltrs, 1000 Ltrs complete all as specified and directed.

S&F in repair of CP Health faucet (hand shower) complete set with 1.5 mtr long pipe abd fittings complete all as specified and as directed.

S&F in repairs CI brackets 450 mm long made with IAS 25x3mm suitable for wash hand basin complete all as PTMT complete all as specified and as directed

S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete all as specified and as directed

S&F in repairs 32 mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repairs Vitreous China wash down water colset (Squat pattern) white complete as fixed in repair excluding flushing cistern and flush pipe "Orissa" pattern size 580x400 with integral footrest inject connection to trap antisyphonage etc complete incl joint between flushing pipe and socket of WC complete all as specified and as directed

S&F in repairs Vitreous China wash down water closet (EWC) (Anglo Indian type (pedestal pattern)white complete as fixed in repairexcluding flushing cistern and flush pipe and trap white including fixing bolts,WC seat cover of fixed with aluminium or ms chromium plated complete all as specified and as directed

S&F in repairs Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed

S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed.

S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as specified and as directed

S&F stainless steel kitchen rack made of 0.63 mm thick stainless steel sheet of size 900 mm x 900 mm x 250 mm fixed to wall with screws complete all as specified and directed.

S&F in repair 100 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

S&F in repair 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed

S&F in repair 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

S&F in repair mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

S&F in repair mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

S&F in repair 100 mm size extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed

S&F in repair 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed

S&F in repairs 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 20 mm dia 'D' type CP towel rail 600 mm long between flanges complete all as specified and directed.

S&F in repairs 20 mm dia anodised aluminium anodised powder coated tubular curtains rod including fixing brackets complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed.

S&F in repairs sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50 sqm in each pane complete all as specified and directed.

S&F in repairs 3.00 mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar complete all as specified and as directed

M&L for 18 to 20 mm thick Makrana dungri/ Baroda Green Marble k (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms using cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.

S&F in repair glass shelf(450x150mm) with chromium plated guard complete all as specified and directed.

S&F in repair aluminium (Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed.

S&F necessary weldings in Repairs 2.5 cm but n exc 5cm thick of metal to be welded n. exc. 6 mm complete all as specified and as directed

M & L for preparating surfaces plastered or unplastered surfaces of wall and applying two coat of oil bound distemper complete all as specified and as directed

Dismantling of barbed wire fencing, any type etc. complete all as specified and directed.

Dismantling of wrought iron or miled steel work of any description not other wise provided complete all as specified and as directed

Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed

All as per item no 87 above, but,above but for each additional or part thereof in depth beyond the first 1.50M complete all as specified and as directed

M&L for RCC M-15 Nominal mix concrete Type B1 1:2:4 (20mm graded aggregate), using 20mm graded aggregate for foundation incl raft footing and bases of column etc. complete all as specified and as directed

M&L for RCC M-15 Nominal mix concrete Type B1 1:2:4 (20mm graded aggregate), using 20mm graded aggregate in columns, pillars, piers, posts and struts complete all as specified and as directed

M&L for RCC M-15 Nominal mix Type B1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers; lintels over 1.5m span etc. complete all as specified and as directed

M&L for form work to sides of cocrete foundation,footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams & similar work vertical better rough finished surfaces of concrete complete all as specified and as directed

M&L for form work to sides and soffits of floor or roof beams, lintels etc, flat, rough finished surface of concrete all as specified and directed

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

All as per item No. 94 above,but, 5mm dia and over, upto and including 10 mm dia in stirrups complete all as specified and as directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provied complete all as specified and as directed

M&L for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed

S&F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed

M&L for preparation of new or previously untreated surfaces of steel or iron surface of any description over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface complete all as specified and as directed

All as per item No.99 above , but , one coat on old steel surfaces complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry Type C1, 1:3:6 (20 mm graded aggregate) with solid blocks, exc.10cm in width and setting in mortar complete in CM 1:6 complete all as specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted masonary bangalore type brought up to courses built in CM 1:6 complete all as specified and as directed.

All as per item No. 102 above, but , except stones complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed upto courses hammer dressing with maximum deprssion on face from straight edge held against the dressed surface n exc 40 mm complete all as specified and as directed.

Supplied only liquid water proofing compound complete all as specified and as directed

M&L for Preperation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed

All as per item No.106 above, but , one coat on old surfaces complete all as specified and as directed

M & L for preparation of new surfaces with Priming paints plaster coat and applying one coat of Synthetic enamal on walls complete all as specified and as directed

Returning, filling soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing excavated soil n.exc 5.0 km and depositing where directed at a level n.exc 1.50 M above the starting points complete all as specified and as directed

Dismanting structual steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed

M&L framed work for hang gates with ends of bar shoulder and/or riveted, or forged into spikes; framed guard bars including pintle hinges, stops hand made sliding bolts etc. & similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed

S&F for 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched; including rounded headed screws, clout nails or revets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required complete all as specified and as directed

S& F zinc coated concertina coil of thickness 2.50 mm of core wire and 0.5 mm thick cold rolled carbon strip (dia approx 610 mm that covering 6 mtr length and 50 spirals) having weight not less than 8.00 kg per coil complete all as specified and as directed

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, welding work required etc. including provision of winding wire complete all as specified and as directed

PRAGATHI BUILDERS

P Ramesh and Co