Construction of New building for Fire and Rescue Service Station with development works at Peelamedu in Coimbatore District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

53.3 : C.I. Steps ( 5 kg)

55.2 : Supplying & fixing of Flat Back Urinal

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

81 : Meter Cupboard

86 : Anti termite treatment

ANNEXURE 2.1.1 : Supplying and filling Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.2.1 : Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

c) In First Floor.

9.2.1 : Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand) a. In Ground Floor

b. In First Floor

10.2.1 : Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) (using crushed stone sand) a. In Foundation and basement

b. In Ground Floor

c. In First Floor

11.2.1 : Brick Partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) (using crushed stone sand) a. In Ground floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

g.Double centering portico area

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm c. door size 1.000 m X 2.100 (Single Leaf)

21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using standardised concrete mix M20 grade. (using crushed stone sand) c. 1000 x 2100mm

22.3.3 : TW frame & TW styles & rails with BWR double leaf shutters for cup board/ wardrobes including one coat primer & two coats enamel paint.

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles without base concrete

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand)

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand)

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4 : Two coat of cement paint over one coat white cement

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

59.2.1 : Gully Trap using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2 : Supplying and fixing of 32 AMPS Triple pole main switch.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug) superior variety

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.2.1 : 3 Nos of 32Amps - Fuse unit

80.1 : 450 x 375 x 20mm thick TW plank

85.1 : Supply of G.I pipe 40mm dia 'B' class

87.1 : Supplying and delivery of Three phase ELCB/RCCB

98.3.2 : TW panelled door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf)

105.1 : 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection

112.1 : S & F of Exsaust Fan 225 mm dia

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

367 : Providing wooden (melamine) polish for new wood

448.2: Supply and fixing 32mm dia PVC Tee with end cap

799 : Two coat of OBD over one coat white cement for inner walls

ANNEXURE II A1) Supplying and fixing of 9 Watts LED bulb

A2)Supplying and fixing of 25" watts LED street light with fittings

A3) Supplying and fixing of 4' long 18 Watts LED tube light with fittings

A4) : Supplying and fixing of water tight Bulk head fittings suitable for 12W bulb.

A5) Supplying and fixing of 12 Watts LED bulb for bulk head fitting

A6)Supplying and fixing of colour galvanised sheet as per standard specification

A7)Supplying, fixing of 65mm dia GI pipe hose pipe for drying yard in above Ground level.

A8) Drilling of 150mm dia deep borewell in hard rock area including drilling of 180mm dia pilot bore well

A9)Supplying, delivery and fixing of 150mm dia PVC casing pipe 6kg/cm2

A10)Supplying and fixing of 150mm dia PVC end cap for borewell

A11)Supply and delivery of clear water vertical wet type 5 HP submersible pumpset for (Duty 50 lpm x 175 m) borewell

A12)Supply and delivery of 3 HP Open well Submersible pump set (Duty 100 lpm x 50 m)

A13)Supplying and Fixing of MS fabricated DOL 5 HP Panel control Board of wall mounting type for borewell submersible motor

A14)Supply & Fixing of Panel control board for 3HP for Open well submersible motor

A15)Labour charges erection of 5HP borewell submersible pumpset & 3 HP Openwell Submersible pumpset (5 HP for borewell & 3 HP for openwell)

A16)Supply and fixing of 150mm MS bore well clamp set

A17)Supplying and fixing of 32mm dia adopter for connecting submerssible pumpset with UPVC pipe .

A18)Supplying and fixing of 4 sqmm PVC 3 core Flat type Copper cable

A19)Supply and fixing of 32mm dia UPVC Pipe for Borewell

A20)Supplying and laying of GI pipe B class with ISI mark in below ground level a) 32mm dia GI B class pipe

b)100 mm dia GI 'B' class pipe

A21) Supplying and fixing of following dia GI pipe in above ground level a) 80mm dia GI pipe

b) 50mm dia GI pipe

A22)Supplying and fixing of following dia GI/GM specials a) 80mm dia Elbow

b) 80mm dia Hex Nipple

c) 80mm dia union

d) 50mm x 32mm dia reducer

e) 50mm dia Elbow

f) 50mm dia Hex Nipple

g) 50mm dia union

h) 50mm dia bend

i) 50mm Tee

j) 50mm dia coupling

k) 80mm dia Non return valve

l) 50mm dia Non return valve

m) 80mm dia Gun Metal Gate valve

n) 50mm dia Gun Metal Gate valve

o) 32mm dia Gun Metal Gate valve

A23)Supplying and laying of following dia PVC Pipe( 10kg for .per.cm2)in below ground level a) 63mm dia pvc pipe

b) 50mm dia pvc pipe

A24) Supplying and delivery of PVC specials a) 63mm dia Elbow

b)63mm dia Tee

c) 50mm dia Tee

d) 50mm dia Elbow

e)63mm x50mm dia reducer

f) 50mmx40mm dia reducer

A25)Supplying, delivering and fixing of 16mm thick Nylon Rope

A26)Supplying and fixing of following size of TNPHC Emblem & Aluminium Dye casting letters with MRF Powder Coating to a) 2'0" (24")Height TNPHC Emblem

b) 9" Aluminium Dye casting letters

A27)Supplying of following LTUG Cable a.) 3.5 core 35 sqmm LTUG cable

A28)Supplying and laying of 80mm dia GI pipe B class with ISI mark for (Below Ground Level)

A29)Supplying and fixing of following dia GI specials a.) 80 mm dia GI bend

b.) 80 mm dia GI Coupling

A30)Supplying of following LTUG Cable a.) 3.5 core 35 sqmm LTUG cable

A31)Labour charges for laying of LT/UG cable in above Ground level

A32)Supply & Fixing of crimping lugs a.)Lugs suitable for 35sqmm UG cable

A33)Supply and fixing of cable gland suitable for PVC armored LTUG cable a.) Cable gland suitable for 35 sqmm UG Cable

A34)Supplying and fixing 3 no 100 Amps porcelin fuse unit

A35)Supplying and fixing 3 no 63 Amps porcelin fuse unit

A36)Supply and fixing of TNEB meter board suitable for 3 phase 63A service connection

A37)Dismantling the damaged RR masonry in CM without affecting the adjacent structure in all floors.