PETTY REPAIRS, WELCOME MAINT AND PERIODICAL SERVICES IN CERTAIN BLDGS. OF NDC AND RAKSHA BHAWAN UNDER GE NEW DELHI

Amount

S&F in repairs, 150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repairs, 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed complete all as specified and directed .

S&F in repairs, 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repairs, 100mm size double action spring butt hinges, mild steel with with steel wire spring, stove enamelled black complete all as specified and directed.

S&F in repairs, continuous piano hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when open) complete all as specified and directed.

S&F in repairs, 300mm , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs, 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, mild steel mortice lock verticle type 100 mm size, 4 levers complete all as specified and directed.

S&F in repairs, mild steel mortice lock verticle type 65 mm size, 2 levers complete all as specified and directed.

S&F in repairs, brass polished 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repairs, 75 mm hasp & staple, safety type, aluminium anodised withmild steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs, brass chromium plated, tubular curtain rod 20mm dia complete all as specified and directed

S&F in repairs, brass chromium plated end brackets for curtain rod 20mm dia fixed complete all as specified and directed

S&F in repairs ms powder coated drappery curtain rods 25mm dia of approved quality fixed in brick/concrete wall complete all as directed and specified

S&F in repairs,ms powder coated decorative drappery curtain end brackets/supports 25mm dia of any description complete all as specified and directed

S&F in repairs, brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed.

S&F in repairs, brass chromium plated towel ring 200mm dia complete all as specified and directed.

S&F in repairs, 140 mm length door stopper aluminum alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and directed.

S&F in repairs, aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs, galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs, 2mm thick fibre sheet glass, ordinary quality and glazing with oil putty, in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs, 5.5mm thick sheet glass, ordinary quality and glazing with oil putty, in squares exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs, 1000 to 1400 mm long and 20 mm wide door seal incl 10 mm wide cotton complete all as specified and directed .

S&F in repairs, looking mirror with plastic moulded frame of size 630 X 450mm , 3mm thickness complete all as specified and directed

S&F in repairs, elegant PVC mirror cabinet with towel rails of size 475mm X 500mm X 150mm complete all as specified and directed .

Repairing, Easing & adjusting of aluminium door including replacement of small article like rubber gaskets, aluminium beadings, screws, etc complete all as specified and directed .

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 15 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 20 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple etc for 25 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, 15mm bore brass head, phase, spindle etc of any size for bib cock/pillar cock/ stop cock/WHB or Wall mixture etc any type complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with elegant knob screwed down high pressure complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way bib taps with elegant knob screwed down high pressure complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Disconnecting existing tanks of capacity not exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning repairing, etc. shall be measured separately) complete all as specified and directed

Disconnecting existing tanks of capacity exc 500 & not exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning repairing, etc. shall be measured separately) complete all as specified and directed

Disconnecting existing tanks of capacity exc 1000 & not exc 2000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning repairing, etc. shall be measured separately) complete all as specified and directed

Dismantling exc 250 and not exc 500 ltrs capacity water tanksand removing to store complete all as specified and directed

Dismantling exc 500 and not exc 1000 ltrs capacity water tanksand removing to store complete all as specified and directed

Dismantling exc 1000 and not exc 2000 ltrs capacity water tanksand removing to store complete all as specified and directed

Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 500 Ltrs capacity of tanks complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 1000 Ltrs capacity of tanks complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 2000 Ltrs capacity of tanks complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

S&F 2000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

S&F in repairs, PVC tank covers suitable for 500 litres to 2000 litres tanks complete all as specified and directed

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore swan neck mixture type pillar tap, cast copper alloy with capstan head, chromium plated, fancy type, screwed down, high pressure, for hot and cold water complete all as specified and directed.

S&F in repairs, 15mm bore brass CP Wall mixer tap for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 25mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make - Perryware/cera

S&F in repairs, 40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make cera/perryware

S&F in repairs, 32 mm bore PVC waste pipe for WHB/urinlas 1000mm long with union etc complete all as specified and directed.

S&F in repairs, 15mm bore Bib tap standard of PTMT(Minimum weight 90 gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. Make: Prayag or equivalent as approved.

S&F in repairs, ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. Make: Prayag or equivalent as approved.

S&F in repairs, ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. Make: Prayag or equivalent as approved.

S&F in repairs, ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. Make: Prayag or equivalent as approved.

S&F in repairs, glass corner shelf of fixed with and including chromium plated brass screws and cleats complete all as specified and directed.

S&F in repairs, PVC connection 15mm dia and 300/450/600 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.

S&F in repairs, CI bracket for WHB or kitchen Sink etc complete all as specified and directed.

S&F in repairs, 125 mm dia CP grating(with/without hole) complete all as specified and directed.

S&F in repairs, stack clamps for 100mm bore pipe made out of 50mm by 5mm flat iron and 16mm dia round stays, including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

S&F in repairs, 75mm dia PVC (SWR) pipes, with all fittings like bend and joint etc single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.

S&F in repairs, 110mm dia PVC (SWR) pipes, with all fittings like bent and joints etc single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.

S&F in repairs, 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repairs, stainless steel sink, 1.00mm thick for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement moratar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make - Diamond/Nirahli

S&F in repairs, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement moratar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make - Diamond/Nirahli

Supply only white cement complete all as specified and directed

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe etc complete all as specified and directed. Make - Hindware/ perryware

S&F in repairs, vitreous china water closet squatting pan 'Orrissa' pattern size 580 X 440 mm white integral foot rests including provision of cement concrete bedding, connnection to flush pipe and making good the disturbed protion of floor to match with the existing surface complete all as directed make cera/jaquar

S&F in repairs, Cascade type europen water closet coloured floor mounted, with seat cover , seat cover hanging devices complete all as specified and directed. Make cera/jaquar

S&F in repair vitreous china ware urinal half stall type white/coloured connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawel plug and making good the surface by white cement to match the wall shade complete.

S&F in repairs, brass chromium plated spreader suitable for urinal complete all as specified and directed.

S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cisterm, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. Make somany/cera

S&F in repairs, 125mm size brass chromium plated shower roses with or with out swivel joints, including fixing to steel pipe or unions complete all as specified and directed.make cera/parko/somany.

S&F in repairs, flush pipe of polyethlene of low or high density or PVC 32mm dia, for low level flushing cistern complete all as specified and directed.

S&F in repairs, handle for PVC low level flushing complete all as specified and directed .

S&F in repairs, ball valve for PVC low level flushing cistern complete all as specified and directed

S&F in repairs, syphon kit complete for PVC low level flushing cistern complete all as specified and directed.

S&F in repairs, syphon kit complete for cascade type WC any type complete all as specified and directed.

S&F in repairs,cascade type WC plastic seat cover smooth closing type white/coloured closed pattern with flat bottom and cover and brass hinging device complete all as specified and directed.

S&F in repairs, plastic water closet seat cover white/coloured closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, wash hand basin vitreous china white, (flat back or angle back type) of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand complete all as directed. Make - Hindware/perryware

S&F in repairs, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .

S&F in repairs, 15 mm bore chromium plated health faucet brass of first quality with flexible tube of size 1.0 mtr long and wall hooks, complete all as specified and directed. Make cera/parko/somany.

S&F in repairs, brass chromium plated toilet paper holder with CP brass screws, complete all as specified and directed. Make- cera/parko/somany.

S&F in repairs, brass chromium plated soap dish with CP brass screws complete all as specified and directed. Make -cera/parko/somany.

Easing and adjusting of wooden door/windows/cupboard shutters of any number of panels for easy closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts complete as in petty repair work complete all as directed.

Repairing of water supply items/ fittings fixtures like leaking of biptap, stop cock, shower rose, gate valve, GI tubing, cistern, syphon, bottel trap, PVC connection, inlet/outlet of water tanks etc including provision for small articles like washers, threads, white lead and clamps etc for day to day maint / complaints complete all as specified and as directed.

S&F in repairs, mineral fibre ceiling boards 16 mm thick 600 X 600 mm size including grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with provn of suspenders from ceiling etc (Armstrong RH Dune 99) complete all as specified and directed.

Supply only different size nails for necessary carpenter work in day to day maintenance complete all as specified and directed.

Supply only drilling bits of any size for necessary carpenter work/plumbing work in day to day maintenance complete all as specified and directed.

Supply only fisher/gitti(plastic)of any size for necessary carpenter/plumber work in day to day maintenance complete all as specified and directed.

Supply only M seal for necessary carpenter/plumbing work in day to day maintenance complete all as specified and directed.

Supply only cutting blade(for grinder etc) for necessary carpenter/plumbing work in day to day maintenance complete all as specified and directed.

Supply only handsaw blade for necessary carpenter/plumbing work in day to day maintenance complete all as specified and directed.

Supply only glass putty for fixing of glass in day to day maintenance complete all as specified and directed.

Supply only washer any size for pvc connection, sanitary fittings and plumbing items in day to day maintenance complete all as specified and directed.

M&L preparation of old decorated surfaces by washing scrapping down of old painted surface of wall including cornices & applying one coat of cement base paint on wall complete all as specified and as directed Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of old treatment on surfaces of walls through electrically operated grinder (wall sanding machine with internal dust extraction system) for preparation of old plastered surfaces of wall, complete all as specified and directed upto 10 mtr height including necessary steel scafolding upto 10 mtr height where required, complete all as specified and as directed by Engr-in-Charge

M&L for applying one coat of 1.0mm thick trucare wall putty thorugh putty spray machine on old surface of wall to achieve even and smooth surface complete all as specified and as directed upto 10 mtr height incl necessary steel scafolding uto 10 mtr height where required complete all as specified and as directed by Engr-in-Charge.

M&L applying one coat of oil bound distemper on walls (old decorated) including cornices complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for applying one coat of weather proof exterior emulsion extra premium 100% acrylic emulsion upto 10 M height incl necessary scafolding complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (b) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (e) Cost of above mentioned shall also included in quoted rates.

M&L preparation of old decorated surfaces by washing scrapping down and stopping of old painted surfaces of ceiling and apply one coat of white wash complete all as specified Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

All as per srl item No. 125 above but one coat of oil bound distemper. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L preparation of old painted wood or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L preparation of old painted steel and iron surface of any description not otherwise described over 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge Note :(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates..

All as per srl item No. 128 above but two coats of synthetic enamel paint. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L preparation of old treated wooden surface and polishing melamine polish on the veneer and Burma teak wood including wood filler with two or more coats of polishing complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. and removal of debris out side of Mod Land

M&L 15mm thick Ready mix plaster on brick work or concrete surfaces of wall (Internal surface) finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L 5mm thick Ready mix plaster on concrete surfaces on ceiling finished even and smooth complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified. Note :(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for single coat textured wall coating raised or recessed applied with spray gun on plastered, plywood or boarding design & pattern as approved incl making good the surrounding surface complete all as specified and as directed by Engr-in-Charge Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

Supplying and applying Single component Acetate polymer based flexible liquid UV resistance waterproof coating @ 1.1 Kg/Sqm in two coats by brush, roller or airles spray for maintaining thickness of 1 mm having Elongation 200%-250% & Tensile strength 2.9Mpa, Bond strength to primed concrete 4.5 MPa and Crack briding up to 2.6 mm . The system includes one coat of cross linked reactive primer @250 gm/sqm on dry prepared surface complete as per manufacturers specification. Allow the treatment to cure atleast 48 hr @30°C before laying Sun Reflective Index ( SRI Coating) for Roof Wateproofing

MRITUNJYA ASSOCIATES

Shivam Firetech Engineers

Mohit Infratech