Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹71.8 LAccepted-AOC 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹78.8 L+₹6.2 L (8.57%)Rejected-Finance 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹79.9 L+₹7.3 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Being higher bidder | |
| 4 | L4₹80.6 L+₹8.0 L (11.1%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | L4 | Rejected-Finance Being higher bidder | |
| 5 | L5₹85.7 L+₹13.1 L (18.1%)Rejected-Finance A 91 DEFENCE COLONY AGRA CANTT AGRA UP 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L5 | Rejected-Finance Being higher bidder |
Tender Value
₹98.5 L
EMD Value
₹1.7 L
Closing Date
6 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Agra
HQ CWE(AF) Agra PIN-282008
ADDN/ALTN/IMPROVEMENT TO CERTAIN SINGLE L/IN SNCOs (P-423) AT AF STN AGRA
2023_MES_578042_1
80022-23/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) Adm Area Agra
As per Tender documents
8 documents required · 8 mandatory
₹1,000
GE(AF) Adm Area, Agra
₹1.7 L
Yes
1 May 2023
30 Jan 2023
13 Mar 2023
30 Jan 2023
6 Mar 2023
20 Feb 2023
Amount
Taking down cement plaster on brick or stone or concrete surfaces of wall etc,including raking out joints , hacking for key, scrubbing down with water etc.complete all as specified and directed.
M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished surface should be even and smooth including WPC @2% by weight of cement complete all as specfied and directed. Note : Rate of water proofing compound (WPC) shall deemed to be included under this item.
S & F for rendering 10mm thick on concrete surface of ceiling with CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.
M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum machanism) with sanding pad of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed.
M&L for Two coats of cement base paint after preparation of new plastered surfaces over a coats of alkali resistant cement primar of walls complete all as specified and directed .
M&L for two coats of cement base paint after preparation of existing old plastered surfaces of walls complete all as specified and directed.
M&L for three coats white wash in ceiling surfaces after preparation to the new plastered surfaces complete all as specified and directed.
M&L for prepration of old surfaces of ceiling and applying one coats of white wash complete all as specified and directed.
M&L for two coats of distemper oil emulsion after preparation of new plastered surfaces of wall over a coats of clear cholle primar over 1 mm thick birla white putty complete all as specified and directed.
M&L for two coats of distemper oil emulsion after preparation of existing complete removed surfaces over 1 mm thick birla white putty of wall complete all as specified and directed
M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coats of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25 mm average thickness (extra depth will be filled with micro concrete) in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture complete all as specified and directed.
Demolition of cement concrete ( reinforced) slab supported on wall & beams and coloumn and similar work of any description in any position not otherwise specially provide for complete all as specified and directed.
M&L RCC 1:2:4 ( Type B-I ) using 20 mm graded aggregate in slabs supported on walls , beams, columns and similar work etc complete all as specified and as directed.
M&L for use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of concrete complete all as specified and directed.
Material and labour for TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.
S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M & L Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified in SSR Part I clause No 10.24, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
S & F for mild steel bolts, purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 12 to 20 mm dia of neck, length of bolts exc. 5 cm but not exc. 10 cm long complete all as specified and directed.
S&F in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe-410-W(Gde-E-250) quality-B complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tiles complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirtings, including taking down of existing skirting plaster and 10 mm thick rendering in cement mortar 1:4, to receive tiles complete all as specified and directed.
M&L for glazed ceramic designed coloured tiles 350 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed.
Demolition of plain cement concrete (unreinforced) of any mix / grade in ground floor and pavings including removal of debris out off the AF station premises / MOD land etc complete all as specified & directed .
M & L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in sunken floor for correction of slope etc complete all as specified and as directed.
M&L for plain cement concrete 1:5:10, type E-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed.
Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.
Taking down chowkats with shutters (without taking down of shutter from the frames)n. exc 1.50 Sqm each complete all as specified and directed.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each complete all as specified and directed.
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing complete all as specified and directed
S&F solid WPC door frames of size 100mm x 50 mm made out of solid WPC with standard Grade Density 780 Kg/CUM single side prelaminated PVC coloured sheet and edges will be painted to match with prelaminated sheet as per specification and drawing complete all as specified and directed.
S&F for Factory Made Solid PVC Moulded door Shutter,with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm coloured PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed.
S&F 300mm long aluminium anodised alloy sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of extruded section complete all as specified and directed.
M&L for 20-25 mm thick hand cut kota stone slab flooring slab of sizes 540 mm x 540 to 560 mm x 560 mm in floor or in trades of steps over 15 mm thick screed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing rounding of edges and dismantling of old tiles complete all as specified and directed.
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing and taking down rendering complete all as specified and directed.
S&F Vitreous China wash down water closet pan semi-pedestal pattern (Anglo-Indian Type), white (including fixing bolts,flush pipe) front or back inlet including plastic water closet seat cover closed pattern with flat bottom and connection to drain (or outgoing pipe) and to flushing pipe, etc and making good to floor complete as in repair complete all as specified and directed. Make:PRAYAG CAT PART No 4031 & 4032/CERA CAT Part No S-1053107P/Hindware CAT Part No 20012(P-18).
S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed Make:PRAYAG CAT PART No 501Smart Flush Cistern/CERA CAT PART No B1010102.
Supply and fix, as in repair, vitreous china under counter wash basin, size 560 x 410 x180 mm, excluding taps, waste chain, plug and porcelain stopper, pillar tap (pillar tap measured and paid separately) but including CP waste coupling fixing in counter complete all as specified and directed. Make:PRAYAG CAT PART No 4790/CERA CAT PART No S2030136/Hindware CAT Part No 10017.
S&F in repair 15mm dia centre hole basin mixer, chromium plated, fancy type complete all as specified and as directed. Make:PRAYAG CAT PART No 8250/JAQUAR CAT Part FLR -5169N13/PLUMBER CART PART No DL 55102.
M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 10 mm thick in cement mortar 1 : 4 including dismantling old granite and moulding at edges complete all as directed and specified.
S&F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed. Make:PRAYAG CAT PART No BS-76/JAQUAR CAT Part No OHS-1789/Plumber CAT Part No ITP 5001.
S&F for 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed in repair complete all as specified and directed. Make:PRAYAG CAT PART No 8108/JAQUAR CAT Part No SPJ-5463/PLUMBER NEC-0203.
S&F in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. Make:PRAYAG CAT PART No 8110/JAQUAR CAT Part No COP-057PM/PLUMBER CAT PART NO-ARA-2105M.
S&F CP soap dish fixed to wall with plugs and screws complete all as directed and specified. Make:PRAYAG CAT PART No BA-5S/JAQUAR CAT Part No AHS-1531/PLUMBER CAT Part No U-0913
S&F unplasticisced 38 mm dia PVC pipes of pressure rating 10 kgf/cm2 laid in trenches/walls complete all as specified and directed .
S&F in repair Towel Rail 600 mm long of CP fixed with and including Chromium plated brass screws and wooden / plastic cleats complete all as specified and directed. Make:PRAYAG CAT PART No BA-1S/JAQUAR CAT Part No ACN-1111BNM/PLUMBER CAT Part No U-0901
S&F in new or old position 32mm bore PVC waste pipe for WHB or sink complete all as specified and directed
S & F PVC connections 15 mm size with PTMT nuts of length 450m complete all as specified and directed.
S&F GI tubes of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm dia including taking down old pipe complete all as specified and directed.
S&F GI tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia including taking down old pipe complete all as specified and directed.
Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 15 mm bore complete all as specified and directed.
Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 20 mm bore complete all as specified and directed.
S&F in repairs 100mm dia stainless steel gratings complete all as specified and directed.
S&F in repairs steel tank cover with zinc coatsing of dia 500mm and height 150mm of cut spherical shape and gas welded of spike 2mm dia and 50mm length at 50mm c/c both ways in zig zag motion with 75mm long MS hinges, Hasp and staple of 75mm size fixed to existing PVC water storage tank of any capacity and binded with galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2mm barbs at 75 c/c complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed.
S&F repairs for 20 mm stop valve, cast iron , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe complete all as specified and directed.
S&F fix in repairs tripple layer 1000 ltrs rotational moulded polyethlene white colour water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified in SSR Part-I complete all as specified and directed.
S&F for Cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections including taking down of existing unserviceable pipe complete all as specified and directed.
S&F for Cast iron soil, waste and vent pipe, Centrifugal type 100 mm bore, spun cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work after including taking down of existing unserviceable pipe complete all as specified and directed.
S&F for Cast iron branch pieces single Centrifugal type (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access door jointed with lead joint, as in repairs ,complete all as specified and directed.
S&F for CI Cowl Centrifugal type suitable for 100 mm bore pipe as in repair complete all as specified and directed
S&F for Cast iron bends/Tee duck foot or heel rest, radius for 100 mm bore pipe, complete all as specified and directed.
S&F for Salt-glazed stoneware gully traps,Centrifugal type 150x150mm size, square or round mouthed, type 'P' or 'S' incl CI grating fixed in repair complete all as specified and directed.
S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls of old pipe complete all as specified and directed.
S & F bend suitable for 110mm dia PVC (SWR) pipe including clamps complete all as specified and as directed.
S&F in repair 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F in repair 110 mm dia PVC (SWR) 'P’ or S, floor trap of any type complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C1 (using 20mm graded agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement including demolition of old cement concrete complete all as specified and directed .
M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster complete all as specified and directed. Note : Making grooves (of uniform size 15 mm x 15 mm) shall be included in quoted rates.
Dismantling of existing roof treatment including tar felt, cement plaster, etc from roof surfaces including cleaning the surface and removing the debris from site complete all as specified and directed.
Demolition of cement concrete (unreinforced ) above ground floors n exc 15cm thickness i.e from RCC roof slabs/terrace complete all as specified and directed.
M&L PCC ( 1:2:4) type B0, using 12.5 mm aggregate padding in averaging on RCC roof slab or terrace with using WPC @ 2% by mix weight of cement including finishing even and smooth with using extra cement complete all as specified and directed. Note : Rate of water proofing compound (WPC) shall deemed to be included under this item.
M&L rendering or screed bed 10 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC @ 2% by wt of cement including finishing even and smooth without using cement complete all as specified and directed. Note : Rate of water proofing compound (WPC) shall deemed to be included under this item.
M&L for water proofing treatment to roof with APP based polymeric membrane, 3 mm thick (min.) consisting of 90 to 100 micron thick central core of HMHDP film and standard weight of 3.00 kg/sqm reinforced with polyster non woven fabric ( weighing n. less than 160 gm / sqm ) shall be applied over and including applying a coats of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm over a coats of bituminous primer @ 0.30 ltrs/Sqm surface, application of APP modified membrane and joint shall be by torch application. The overlaps shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction complete all as specified & directed.
M&L for 40 mm thick locally available brick tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 . The cement mortar screed shall be mixed with polymer based liquid water proofing compound as per manufacturers instructions and joints of tiles shall be filled with CM 1:3 mixed with crude complete all as specified and directed. Note : Rate of water proofing compound (WPC) shall deemed to be included under this item.
M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of WPC @ 2% by wt of cement complete all as specified and directed. Note : Rate of water proofing compound (WPC) shall deemed to be included under this item.
S & F for box type Steel windows / ventilators with pressed steel frame made out of 1.25 mm thick steel having two rebate with glazed shutters and fly proofing shutters including guard bars, 75 mm thick hinges, 150 mm tower bolt, 150 mm handle and locking arrangements etc complete all as specified and shown in drg CE/Ald/TD-172 sheet 1/2 & 2/2 complete all as specified and directed.
S&F stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F plain sheet glass 3mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repair Vitreous China urinals flat back, size of 345 x 320 x 560 mm white (minimum), Half stall,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinalback in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed Make :Prayag Cat Part No 4998/ Hindware Cat Part No 60002/Cera Cat Part S4020112
S&F for CP urinal spreader fxing with 15mm dia pipe complete all as specified and directed.
Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations pipe line etc or for shafts, wells, cesspits, manholes, pier holes etc and not exc 10 sqm on plan and not exceeding 1.50 metre in depth and getting out complete all as specified and directed.
Returning filling in, including speading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, in trenches, after the pipes have been laid and tested complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 metre and deposting where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
M&L for Plain cement concrete (1:4:8), Type D-2, using 40 mm graded stone aggregate as in concrete bed to drain pipes laid to falls in trenches in any depth including packing under and hauncing against the sides of pipes for 150 mm bore pipes with concrete after the pipes are laid and tested complete all as specified and directed.
M&L for 150 mm bore, Salt glased stoneware drain pipes (Grade 'A') laid in trenches at any depth including jointing and testing complete all as specified and directed. Note : Excavation & earth work & concrete for bed and haunching of pipe shall be measured and paid separately.
M&L for Plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregates as surface channel/drains inside the manholes and like including weathering, sightly rounded or chamfered angles and throating as directed and provision of necessary formwork to any extent and finished exposed surface even and smooth without using extra cement complete all as specified and directed.
M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radious, old size built in CM (1:6) of brick work complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on brick wall/concrete surface with using WPC, finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for three coatss of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation,filling and mass concrete etc complete all as specified and directed.
M&L for Cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as in benching, coping, plinth course, bands stops etc incl necessary form works complete all specified and directed.
S&F stainless steel tubing of 20 mm bore minimum 1.0 mm wall thickness as in curtain rod complete incl supply and fixing of accessories like CP brackets side CP ornamental holder (Bracket & holder are in pairs) etc all as specified & directed. (For the purpose of mesurement and payment running length of curtain rod only shall be considered.)
S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position in all respect including taking down existing shutters complete all as specified and directed.
S&F solid WPC cupboard frames of size 62 mm x 32 mm single rebate made out of solid WPC with standard Grade Density 780 Kg/CUM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet as per specification and drawing.
S&F Piano/continuous hinge of size 19mm stainless steel with SS screws complete as specified.
S&F Stainless Steel (304 Grade) Finished Handles 150 mm with stainless steel screws complete all as specified and directed.
S&F Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long with stainless steel screws complete all as specified and directed.
S&F Hasp and staple 100 mm wide, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and directed.
Material and labour for TMT bar 6mm to 8 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.
M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radious, old size built in CM (1:4) of brick work complete all as specified and directed.
M&L Hard core of broken stone or boulders n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface complete all as specified and directed.
M&L PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and directed.
M&L 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement including demolition of old cement concrete complete all as specifie and directed by Engr-in-Charge.
S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as per requirements of Fe 410 (Gde E250) quality A complete all as specified and directed.
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includin distance pieces, cleats etc complete all as specified and diected.
M&L Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc of Fe 410 (Gde E250) complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coatsing GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint including one coats of red oxide complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.
M&L Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 25mm thick sand cushioning complete all as specified.
Providing and fixing factory made cement concrete kerb stone B0 (1:2:4) ussing 12.5mm stone aggregates water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete as specified and directed
M&L for preparation of new concrete surfaces and applying two coats of synthetic enamel paint including complete all as specified and directed.
Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. and making good disturbed surfaces of walls complete all as specfied and directed.
M & L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including MS pressed steel shet sunk box with 1.2 mm thick ISI marked laminated bakellite sheet fixed with cromium / nicckel plated screws and washers for switches and sockets, including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour and complete all as specified and directed
All as per srl item No 123 above but for call bell point complete all as specified and directed.
All as per srl item No 123 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.
All as per srl item No 123 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per srl item No 123 above but for one light point controlled by two Nos 2 way switches complete all as specified and directed.
M&L for point wiring with 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet sunken box with 1.2 mm laminated bakellite sheet cover ISI marked suitable for an independant 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface complete all as specified and directed.
S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.
S&F switch piano 2- way, 5/6 amps flush type 230 volts complete all as specified and directed.
S&F bell push flush type 5 amps SP 240 volts complete all as specified and directed.
S&F switch piano flush type one way 16 amps SP 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 3 Pin 5/6 amps flush type 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 6 Pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
S&F bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.
S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.
S&F ceiling fan regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified and directed.
S & F in light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. (Note power factor should not be less thtn 0.95) complete all as specified and directed. Make- ORIENT Cat part No-LBLN-20-C-AL /Phlips Cat part No- BN021C LED22S PSU CW GR /Bajaj Cat part No BCLAB 20W LED P
S&F in replacement of old U/S tube light fitting with energy saving decorative batten type 10 watt energy efficient tube light fitting (2 Feet) highly durable surfacce mounted LED baten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Phlips cat part- BN021LED12S6500PSUGR/Bajaj Cat Part No- BCLSB 10W NW.
S&F decorative wall mounting light fittingswith opal glass diffuser and stainless steel body suitable for and including LED lamp 8Watt (B-22 base) complete all as specified and directed. Make: Philips Cat Ref 58184/Crompton/Bajaj
S & F of bedside light of 3 W capacity of output 70-80 lumen having adjustable heads to change its focus area complete all as specified and directed. Make:Philips 48042/30/31 or equivalent in Havells/Crompton.
M&L for replacement of existing unsv building security light fittings with LED street light fitting 18 Watts, come with in-built IR Sensor , IP-65 including making connections complete all as specified and directed. Make: Baja Cat Ref No ENXT P 20W WH PO PC SD/ Orient Cat Ref LSFS-020-CF/Halonix
Supply and Fixing BLDC 5 Star ceiling fan 1200mm sweep suitable to work on single phase AC 230 volts 50Hz complete with connecting electrically to ceiling rose or connector black using PVC insulated and over all sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site or directed. Make -Crompton Model No Energion charge BEE 5 Star or equivelent to Havells/Bajaj
Cutting wall of any type, making hole for fixing of exhaust fan size 300mm sweep (round/squire) and making good surface with fine plastring, finishing and colouring with existing colour macthing complete all as specified and directed.
Supply and fixing Heavy duty exhaust fan 300 mm sweep steel body, AC, Single phase, 230 volts, 1400 RPM complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed. Make : Havells/Bajaj/Crompton
Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
S&F of water heater storage typer 50 Ltr, 5 star rating with titanium coatsed MS tank housed in polycarbonate body having thermostate with external knob complete including all accessories and suitable for working on high pressure pumps and fixing on wall with 4 Nos of fastners, plug Top 15 Amps complete all as specified and directed. Make : Racold Platinum plus/Crompton-Radiant DX/Havells-Monza DX
S&F in repairs VTPN 8 way double door suitable for 4 pole MCCB as incoming & SP/TP MCB as outgoing, metal door IP-43 protection, IK-09 as per IES-61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and suitable size copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with knockout and making good disturbed surface complete all as specified and directed. Note: MCCB & MCB to be measured and paid seprately.
S & F in replacement of MCCB 415 Volts, 50 Hz, 100 Amps 4 pole with rupturing capacity 16 KA including providing thimbles for out-going cables complete all as specified and directed.
S & F MCB single pole 240 volts, 'C' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and directed.
S & F MCB SPN 240 volts, 'C' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
Taking down old unsv sub main wiring any type and size aluminium/ copper incl batten/ conduit and making good disturbed surface to match with existing complete all as specified and directed.
S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 25 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.
M & L for replacament of existing old unsv earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore medium grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
Taking out old unserviceable LT UG cables of size 10 to 25 Sq mm 4 Core from trenches, poles/walls and floor etc complete all as spd and directed.( necessary earth work shall be measured and paid under respective item of sch) complete all as specified and directed
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sq. mm 4 core, complete, including earth work, sand cushioning, brick or PCC covering, light grade GI tubing where necessary complete all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sq. mm 2 core, complete, including earth work, sand cushioning, brick or PCC covering, light grade GI tubing where necessary complete all as specified and directed.
Supply and laying corrugated HDPE pipe of 40mm dia for cable protection confirming IS-14930 1 & 2, laid in trenches or fixing to the pole with necessary accessories complete all as specified and directed. Make:- ASTRAL/JPC PIPE PVT/BHQGWATI PLASTIC & AGRICULTURE INDUSTRY.
Materail and labour of GI tubing light grade of 40 mm dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc complete all as specified and directed.
Supply installation erection commissioning and testing in replacement of exiting unsv of LT panel board cubical out door type of suitable size for housing of all equipments & proper heat dissipation, CPRI approved weather/dust proof, factory made out of 3.15 mm thick CRCA sheet powder coatsed with front and back side openable with suitable cable chamber and front side shutters with locking arrangement panel base of angle iron 50x50x6 mm upto 45 cm height for 433 volts, 3 phase, 4 wire system including TPN Aluminium bus bar of rating not less than 1.5 times the rated capacity of the incomer MCCB. The TPN bus bar shall be insulated with colour coded heat shrinkable sleeves and shall be mounted on F class insulators. All interconnections between the main bus bar as well as outgoing feeders shall be carried out with TPN Aluminium bus bar of rating not less than 1.5 times rated capacity of of individual outgoing feeders. All control wiring shall be with FRLS PVC insulated 6 sqmm multi-stranded copper conductor and shall be properly bunched. The cubical shall have bottom channel of size 75 x 40 mm and complete mounted or fixed on PCC foundation above 0.60 mtr on floor and cable connection with suitable size of copper lugs and suitable size chrome plated glands provided for incoming and out-going cables comprising the following :- INCOMING MCCB (a) MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA - 01 Nos. OUTGOINGS MCCB (a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 25 KA - 02 Nos. b) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA - 02 Nos. Meatering :- (a) Multifunction meter to measure voltage, current, frequency, & Power factor - 01 No (b) LED Indicating lamps RYB set of three -01 Sets
Supply, instrallation testing & commissioning of 3 Phase, 4 Wire, LTCT operated 0.5s accuracy Prepaid Energy Meter along with set of 4 nos , 400A/5A LT CTs, BIS 16444 Marked in existing Meter Board / Floor Panels with Pre payment shock proof capacitive touch Keypad (Similar as IOS and android phone technology), Bluetooth, based Digital along with inbuilt load control switch, containing provision for TOD & RTC, inbuilt feature sense for data transfer (wireless, without DCU, USB, Pen drive) no other extra equipment required for data transfer, meter itself capable for data transfer) capable to define 4 tariff slabs, happy hour & hoilday definition , when user go outside of the home, user can punch recharge token on meter kaypad and manually and automatic via mobile app. Meter should support the following data's :- 30 minutes instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand. Meter should have connect / disconnect remotely remotely, functionality operable for prepaid/ post-paid billing software complete all as specified and directed. Make :- Liberty 170 of Secure equivalent L&T/ Havells Note:- Old Electric meter shall be deposited at E/M store yard.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized earth wire 4 mm dia by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No -3 of SSR Part I connected to earthing test points all as specified or indicated including excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 40mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with15mm dia protection pipe and 20mm dia watering pipe, wiremesh and copper lugs, GI protection pipe and testing on completion complete all as specified and directed .
Taking up and down old/ unsv GI tubing with all fittings of size 25 mm dia. complete all as spd and directed. (Necessary earth work will be measured and paid seperately complete all as specified and directed.
M & L for supply, fixing and laying GI water tubing 25 mm bore medium grade ISI marked with all required fittings such as bends, elbow, tees, short pieces, connector, check nuts and threading complete all as specified and directed.
M & L for replacement of existing unsv Gun metal gate valve ISI marked with iron wheet head screwed both ends for pipe of size 25 mm complete all as specified and directed.
Sethi Brothers
Shiv Krishan Associates
M/s M S Sharma and Co.
M/s Shrangi Rishi Construction
R.C. Magla and Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .