Transportation, Installation, necessary fabrication, commissioning trial run of 1200mm width,2 150kW,6.6kV Double drive belt conveyor for a length of 120mtr and extension for 280 mtr. in length 7 times shifting along Trunk Road-6 T-6 West Side, Sect

Amount

Part A: Installation of Link Belt along Trunk Road-6(T-6)West Side for 120 metre

Transportation of the 1200mm width, 2x150kW, 6.6kV Drive Head complete including gear box, motor(150kW/6.6kV), base frame, couplings, bearing blocks, fencing etc from surface by MUV and installation as per mine plan with necessary fabrication job.

Transportation of Discharge Unit complete with girders, strike plate, chute plates, scrappers etc from surface by MUV and installation as per mine plan(at 55R(R-V Seam)) with necessary fabrication job.

Transportation of Tail End Unit complete with fencing from surface by MUV and installation as per mine plan(55R(R-V Seam)) with necessary fabrication job.

Transportation of Loop Take-up Unit Complete with fencing from surface by MUV and installation as per mine plan(55R(R-V Seam)) with necessary fabrication job.

Transportation of 120mtr. 1200mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from surface to 48D/between-1L & -2L by MUV and installation as per mine plan in R-V seam.

Transporting, laying, lapping & jointing of 280 mtr. of belting(40 mtr in Loop take-up Unit).

Transportation of one 6.6kV, 2X150 kW DOL HT Starter Surface to 48D/in between -1L and -2L(R-V Seam) after loading it on MUV then unloading and placing manually on platform.

Transportation of one 6.6kV, 400A VCB from Surface to 48D/in between -1L and -2L(R-V Seam) after loading it on MUV then unloading and placing manually on platform.

Transportation of 340 mtr of 6.6kV grade 35 sq.mm. PVC/DWA cable from Surface to 45D/in between -1L and -2L and laying-hanging of this cable of 45D/in between -1L to -2L to incoming of 6.6kV,400A VCB.

Transportation of 340 mtr belt sequence cable from surface to 45D/in between -1L and -2L and laying-hanging of this cable from 45D/in between -1L to -2L to 6.6kV, 2X150 kW DOL HT Starter

Transportation of pull cords with its cable, communication devices with its cable, signaling system (8-SWG GI wire, bobbin insulators & 3/8" x 3" MS Bolt-nut) from surface to proposed link belt installation site (R-V seam) for 400mtr. belt and laying-hanging them as per mine plan in R-V seam.

Testing, trial run, alignment & commissioning of this belt conveyor as per mine plan in R-V seam.

Supply of G.I Wire 8 SWG

Supply of Bobbin insulators

Supply of MS Nut & Bolt (5/8" x 3") with washer

Supply of DA & Oxygen Cylinder Oxygen-1 cylinder,DA-1 cylinder

Supply of MS Nut-Bolt of 5/8" X 2"

Civil foundation for this belt drive head as per mine plan, Platform for VCB and Starter.

Part B: Extension of Link Belt along Trunk Road-6(T-6) West Side for 280 metre

Transportation of 280mtr. 1200mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from surface to 48D/between -1L &-2L by MUV and installation as per mine plan in R-V seam.

Transporting, laying, lapping & jointing of 560 mtr. of belting

Dismantling of Tail-Unit Complete

Transportation, installtion, and grouting of tailend unit complete

Extension of pull cord, signalling and grouting and lockout devices

Supply of G.I. wire 8 SWG

Supply of Bobin insulator

Supply of M.S Nut & Bolt (3/8"x 3") with washer

Supply of M.S Nut & Bolt (5/8"x 2") with washer

Total impact of GST for the purpose of CTC

N.K. ENTERPRISE (BID ID -1120025)

F.R. ENTERPRISE (BID ID -1120051)