Loading
Loading…
Loading…
Tender Value
₹63.1 L
EMD Value
₹1.3 L
Closing Date
9 Jun 2026, 3:00 pm4d left
Executive Engineer, BUILDING DIVISION BETTIAH
EE
Executive Engineer Bettiah, BCD, Bettiah, bihar
Superintending Engineer, BUILDING CIRCLE MOTIHARI
SE
Construction of Guard room, Drain, Repair of Septic tank, Special Repair and Height Raising of Boundary wall of SC & ST Residential Boy High School at Belsandi, under Gaunaha Block (West Champaran)
132131
04/BCD/BETTIAH/2026-27 GR 2
Open Tender
GENERAL
Pashchim Champaran
• 1) Audited Annual Financial Turnover from Chartered Accountant for the years
2022-2023
2023-2024
2024-2025
• 2) Certificates by Employer (not below the rank of Executive Engineer) for successful completion of works during last five years, specifying
i. Name of work
ii. Employer
iii. Location
iv. Contract amount
v. Date of start
vi. Date of completion
vii. Number of storey
viii. Total built up area of building in contract
• 3) List of Works in hand (Existing Commitment) specifying
i. Name of work
ii. Employer
iii. Location
iv. Contract amount
v. Date of start
vi. Date of completion.
• 4) C.V. of Engineers with
i. Educational qualification certificate
ii. Individual affidavit of Engineer to perform the job if allotted to bidder
• 5) Document showing ownership of plants and equipment needed for successful completion of work :-
i. Automatic Batching plant with accessories
ii. Concrete Mixer with weighing facility
iii. Steel centering and shuttering showing area in square feet
iv. water Tanker
v. Vibrator
• 6) Details of financial availability:-
i. Certificate of any Nationalized Bank extending credit facility up to 10 % of B.O.Q Amount
ii. Self declaration of investing 25 % of B.O.Q Amount.
• 7) Certificates in the form of Affidavit by the bidder for: -
i. Bidder had not abandoned any project which was taken up by bidder
ii. Bidder had never been in Litigation lying in any court of law with employer of previous works
iii. Bidder had no relative or any person directly or indirectly involved in design, execution, supervision and testing of this tendered
• 8) Bidding Capacity statement
Bidding Capacity, BC = A x N x 2 ? B
Where,
A= Maximum ATO at current price level (with 8% annual indexation)
N = Time of completion of this tendered work in years
B = Value of works in hand (Existing Commitment of Bidder)
GENERAL
PERCENTAGE
L1
1
12 documents required · 12 mandatory
₹5,000
Processing Fee: 590
₹1.3 L
AT OFFICE OF SE MOTIHARI, BCD , MOTIHARI
25 May 2026
25 May 2026
10 Jun 2026
25 May 2026
9 Jun 2026
25 May 2026
27 May 2026
GOVERNMENT OF BIHAR
BUILDING CONSTRUCTION DEPARTMENT
NAME OF DIVISION :- BUILDING DIVISION, BETTIAH
BILL OF QUANTITY
Name of work:- A/R to D Type quarter D-1 in officer coloney at Bagaha for the year 2021-22 [Change of occupancy]
Estimated Cost :- M/R No.
Earnest Money :- Date :-
Cost of B.O.Q :- Sold to
Date of Tender :-
Time of Completion :-
S.No. Code Items N L B Qty. Unit Rate Amount
1 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
2 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
3 13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
4 13.11.4 Providing 12mm cement plaster (1: 6) in wall etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
5 13.24.2 Providing 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
6 13.80 A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
7 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
8 13.92.2 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
9 13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
10 13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old wood work (one more coats) etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
11 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
12 9.17.1 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
13 21.1 Providing and fixing anodised aluminium work etc all complete job as per building specification & direction of E/I.
21.1.1.1 #REF! #REF! #REF! #REF!
21.1.2.1 #REF! #REF! #REF! #REF!
14 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment all complete as per building specification and direction of E/l. #REF! #REF! #REF! #REF!
15 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. #REF! #REF! #REF! #REF!
16 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
17 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments #REF! #REF! #REF! #REF!
18 9.51.1 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62x19 mm #REF! #REF! #REF! #REF!
19 9.31.2.1 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: #REF! #REF! #REF! #REF!
20 2.25(a) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. #REF! #REF! #REF! #REF!
21 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
22 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. #REF! #REF! #REF! #REF!
23 Supplying labour for easing and adjusting D/W shutter with chaukhat etc. all complete as per the direction of Engineer-in-charge.
0112 2nd carpenter #REF! #REF! #REF! #REF!
0L05 Helper #REF! #REF! #REF! #REF!
24 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). #REF! #REF! #REF! #REF!
25 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. etc all complete job as per building specification & direction of E/I.
5.22.7A 8mm dia #REF! #REF! #REF! #REF!
5.22.7B 10mm dia #REF! #REF! #REF! #REF!
26 Carriage cost of Materials
Sone sand #REF! #REF! #REF! #REF!
Stone chips #REF! #REF! #REF! #REF!
Local sand #REF! #REF! #REF! #REF!
Brick #REF! #REF! #REF! #REF!
Earth #REF! #REF! #REF! #REF!
Paver block #REF! #REF! #REF! #REF!
27 Extra cost of Materials
Paver block #REF! #REF! #REF! #REF!
Cement #REF! #REF! #REF! #REF!
28 NS Supply and fixing Half HP electric motor etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
29 Supplying labour for site cleaning etc all complete job as per building specification & direction of E/I.
0L05 Helper #REF! #REF! #REF! #REF!
30 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.
18.9.1 15 mm nominal outer dia Pipes #REF! #REF! #REF! #REF!
18.9.2 20 mm nominal outer dia Pipes #REF! #REF! #REF! #REF!
18.9.3 25 mm nominal outer dia Pipes #REF! #REF! #REF! #REF!
31 18.15.1 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
32 18.16.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
33 18.17.1A Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : mm nominal bore. etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
34 18.18.1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
35 18.21.1 Providing and fixing uplasticised PVC connection pipe with brass ions : nominal bore etc all complete job as per building specification & direction of E/I.
A 18.21.1.1 15mm dia #REF! #REF! #REF! #REF!
B 18.21.1.2 20mm dia #REF! #REF! #REF! #REF!
36 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
37 18.54.1 Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
38 18.59.1 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces,tapers etc if required will be paid separately) : 50 mm dia #REF! #REF! #REF! #REF!
39 17.1. Supply W.C. squating pan with flushing cistern etc all complete job as per building specification & direction of E/I.
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests #REF! #REF! #REF! #REF!
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid #REF! #REF! #REF! #REF!
40 17.7.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
41 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : #REF! #REF! #REF! #REF!
42 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. etc all complete job as per building specification & direction of E/I. #REF! #REF! #REF! #REF!
43 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. etc all complete job as per building specification & direction of E/I.
12.78.1 75 mm diameter #REF! #REF! #REF! #REF!
12.78.2 110 mm diameter #REF! #REF! #REF! #REF!
44 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
12.79.1.1 75mm dia coupler #REF! #REF! #REF! #REF!
12.79.1.2 110mm dia coupler #REF! #REF! #REF! #REF!
12.79.5.1 75mm dia band #REF! #REF! #REF! #REF!
12.79.5.2 110mm dia band #REF! #REF! #REF! #REF!
45 10.44 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer_In_charge. #REF! #REF! #REF! #REF!
46 12.1.3 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 #REF! #REF! #REF! #REF!
Executive Engineer
Building Division, Bettiah
GOVERNMENT OF BIHAR
BUILDING CONSTRUCTION DEPARTMENT
NAME OF DIVISION :- BUILDING DIVISION, BETTIAH
BILL OF QUANTITY
NAME OF WORK :- Construction of Guard room, Drain, Repair of Septic tank, Special Repair and Height Raising of Boundary wall of SC & ST Residential Boy High School at Belsandi, under Gaunaha Block (West Champaran) Gurad room
Estimated Cost :- ₹ 6,305,695.00
Earnest Money :- ₹ 126,200.00
Cost of B.O.Q :- ₹ 10,000.00
S.No. Code Items Qty. Unit Rate Amount Qty. Amount Qty. Amount
1 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. etc all complete job as per building specification & direction of E/I. 477.10 sqm 21.70 10,353.00 477.10 10,353.00 0.00
2 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches etc all complete job as per building specification & direction of E/I 2703.57 sqm 9.70 26,225.00 2703.57 26,225.00 0.00
3 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: 8.60 cum 1411.20 12,136.00 8.60 12,136.00 0.00
4 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 83.38 cum 5670.00 472,765.00 83.38 472,765.00 0.00
5 5.9 Centring and shuttering including strutting,propping etc. 0.00 0.00
5.9.1 Lintels, beams, plinth bams, bottom 8.92 sqm 211.60 1,887.00 414.87 87,786.00 8.92 1,887.00
6 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. etc all complete job as per building specification & direction of E/I. 0.00 0.00
7 6.1.14A + 6.3A Brick work with bricks of class designation 100A in foundations and plinth in CM 1:6 157.06 cum 5662.10 889,289.00 157.06 889,289.00 0.00
8 13.12.4 Providing 15 mm cement plaster (1: 6) in wall etc all complete job as per building specification & direction of E/I. 2906.62 sqm 162.80 473,198.00 2906.62 473,198.00 0.00
9 13.79.1+13.78.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade 2906.62 sqm 119.80 348,213.00 2906.62 348,213.00 0.00
10 11.35 Providing and fixing M.S. angle 50x50x5 mm to act as nosing with tugsof M.S. flat 10x5 mm 10 cm long forked at end 60 cm apart (minimum3 lugs to be provided) including necessary welding and applying apriming coat of approved primer on exposed surfaces etc. complete 1668.96 kg 118.40 197,605.00 1668.96 197,605.00 0.00
11 10.43 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre 907.04 m 272.60 247,259.00 907.04 247,259.00 0.00
12 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old wood work (one more coats) etc all complete job as per building specification & direction of E/I. 53.80 sqm 83.50 4,492.00 53.80 4,492.00 0.00
13 Supplying labour for site cleaning etc all complete job as per building specification & direction of E/I. 0.00 0.00
14 Carriage cost of Materials 0.00 0.00
15 Extra cost of Materials 0.00 0.00
16 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface 200.00 m 1087.90 217,580.00 200.00 217,580.00 0.00
17 9.32.2 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 8.00 each 33603.40 268,827.00 8.00 268,827.00 0.00
18 18.33.1 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 10.00 each 7210.60 72,106.00 10.00 72,106.00 0.00
19 9.32.2 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 1.00 each 33603.40 33,603.00 1.00 33,603.00 0.00
20 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 60.12 sqm 203.60 12,240.00 60.12 12,240.00 0.00
21 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion all complete as per direction of Engineer in Chargecomplete job as per building specification & direction of E/I. 120.00 m 257.50 30,900.00 120.00 30,900.00 0.00
22 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories etc as per building specification & direction of E/I. 0.00 0.00
12.79.4.2 ii.Single tee without door (110 mm) 10.00 Each 190.70 1,907.00 10.00 1,907.00 0.00
23 0L01 Un Skilled labour for site cleaning 5.00 no. 355.00 1,775.00 0.00 5.00 1,775.00
24 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kind of soil. 24.25 m3 360.70 8,745.00 0.00 24.245 8,745.00
25 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete 8.30 m3 287.30 2,385.00 0.00 8.30 2,385.00
26 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/. 38.76 sqm 283.30 10,981.00 0.00 38.76 10,981.00
27 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 2.68 cum 3998.10 10,715.00 0.00 2.68 10,715.00
28 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, includingpumping of concrete to site of laying but excluding the cost of centering, shuttering finishing - All works up to plinth level 5.54 cum 5063.40 28,051.00 0.00 5.54 28,051.00
29 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 13.87 cum 123.90 1,718.00 0.00 13.87 1,718.00
30 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 0.71 cum 4923.00 3,495.00 0.00 0.71 3,495.00
31 5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing - All work above Plinth level upto floor V Level. 7.14 cum 5863.20 41,857.00 0.00 7.139 41,857.00
32 5.9 Centring and shuttering including strutting,propping etc. and removal of form for. 0.00 0.00
33 10.18 M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 1.00 no. 165.40 165.00 0.00 1.00 165.00
34 6.1.14C + 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in Cement mortar 1:6 (1 cement: 6 coarse sand ). Extra tor Brick work in superstructure above plinth level upto floor V cum. 7.35 cum 5765.20 42,374.00 0.00 7.35 42,374.00
35 13.13.1 + 13.36.5 Providing 20mm cement plaster in cm (1:3) with water proofing compound 5% sika etc all complete job as per building specification & direction of E/I. 14.82 sqm 240.40 3,563.00 0.00 14.82 3,563.00
36 13.11.4 Providing 12mm CP in cm (1:6) with clean coarse sand etc all complete job as per building specification & direction of E/I. 31.85 sqm 141.50 4,507.00 0.00 31.85 4,507.00
37 13.12.4 Providing 15mm CP in cm (1:6) on rough side of single or half brick wall with clean coarse sand etc all complete job as per building specification & direction of E/I. 65.27 sqm 162.80 10,626.00 0.00 65.27 10,626.00
38 13.24.2 Providing 6mm cement plaster in cm (1:4) in ceiling etc all complete job as per building specification & direction of E/I. 20.94 sqm 125.60 2,630.00 0.00 20.94 2,630.00
39 13.17.2 Providing 12mm thick CP in cm (1:4) with punning etc all complete job as per building specification & direction of E/I. 20.58 sqm 192.20 3,955.00 0.00 20.58 3,955.00
40 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments 9.30 sqm 1638.80 15,241.00 0.00 9.30 15,241.00
41 10.5.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer Using flats 30x6 mm for diagonal braces and central cross piece. 11.97 sqm 3653.00 43,726.00 0.00 11.97 43,726.00
42 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings with rawl plugs screws etc 138.60 kg 161.10 22,328.00 0.00 189.00 30,448.00
22 13.80.A.2 Providing and applying white cement based putty average thickness 2 mm of aproved brand 118.06 sqm 105.40 12,444.00 0.00 118.06 12,444.00
44 13.77A.1 + 13.78.2 Distempering with 1st quality washable distemper (ready made ) of approved manufacturer and of required shade and colour complete. As per manufacture's specifications Two or more coats on new work + over Applying one coat of Distemper primer of approved brand and manufacture on wall surface: 52.79 sqm 95.30 5,031.00 0.00 52.79 5,031.00
45 13.46A.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 85.85 sqm 132.50 11,375.00 0.00 85.85 11,375.00
46 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work 42.53 sqm 84.50 3,594.00 0.00 42.53 3,594.00
G.Total 6,305,695.00
Executive Engineer
Building Division, Bettiah
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ENC LT 1094.pdf
NIT • 3.92 MB
Rules for Minimum Rate.pdf
NIT • 2.13 MB
04_NIT_04_Tharuhat (Two bid).pdf
NIT • 0.28 MB
Gr-02_Belsandi.xlsx
NIT • 0.03 MB
Download all tender documents and submit your bid