Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.9 LAccepted-AOC | L1 | Accepted-AOC Reasonable rates | |
| 2 | L2₹50.3 L+₹81,145.28 (1.64%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹50.9 L+₹1.4 L (2.84%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹51.5 L+₹2.0 L (4.12%)Rejected-Finance | L4 | Rejected-Finance Quoted amount higher than L1 | |
| 5 | L5₹51.6 L+₹2.1 L (4.18%)Rejected-Finance MIL STN AGARTALA | L5 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹48.5 L
EMD Value
₹96,900
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL N K CHAUDHARY
HQ 137 WKS ENGR PIN 914137 CO 99 APO
SPL REPAIRS AND ADDN ALTN TO CERTAIN BLDG IN ZONE Q AND ZONE N AT MIL STN AGARTALA
2022_MES_566442_1
8694/E8
Open Tender
Civil Works
Item Rate
180 days
Agartala
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) AGARTALA
₹96,900
6 Mar 2023
1 Dec 2022
16 Jan 2023
1 Dec 2022
9 Jan 2023
26 Dec 2022
Amount
Dismantling of AC sheet corrugated / CGI corrugated sheets in roofing any gauge and any thickness including ridge, valley/gutter etc.
Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling timber boarding of any description fixed in any position complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc and brushing neat cement slurry at the rate of 3 kg of cement per sqm complete all as specified and directed.
Dismantling wall /ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition and breaking up 100 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Taking up or down 15mm bore steel water tubing & connections complete all as specified and as directed..
All as per item No. 9 above but 20 mm bore -ditto-
Taking down chowkat with shutter/without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and as directed.
Taking down chowkat with shutter/without taking off shutter from the frame exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed.
Hacking out old broken glass ( any thickness, sizes, quality or description) from wooden frames or glazed with putty or fixed with beads complete all as specified and as directed.
Supply and fixing 4 mm thick sheet glass ordinary quality & glazing with oil putty, glazing pin etc in squares n exe 0.5 sqm in each pane complete all as specified and as directed.
Supply and fixing 4 mm thick sheet glass frosted ordinary quality & glazing with oil putty, glazing pin etc in squares n. exe 0.5 sqm in each pane complete all as specified and as directed.
Excavation in post holes each n exc 0.5 cum getting out returning filling in and removing earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance not exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed..
Supply and fix rolled mild steel section in joist, channel, angle or tee sections, fixed independently,without connecting plates, etc.(cut to ordinary lengths i.e., within 20 mm of the length indicated) conforming to Fe-410-W(Gde-E-250) quality-B grade complete all as specified and as directed.
Material and labour for PCC 1:3:6 type C2 (using 40 mm grade stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified complete all as specified and as directed.
Supply and fixing 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.
Supply and fixing 20 mm thick second class hard wood boarding planed both side with butt joints fixed with nails in any situation complete all as specified and as directed.
Cutting holes into brick wall for inserting hold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, depth of cutting exe half brick but not exe one brick complete all as specified and as directed. Note: Cutting of holes will be carried out by using mechanical means like Groove cutter/ wall chaser.
Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. .
Supply and fix mild steel work such as grills,gratings, guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and as directed..
Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for preparation of new unplastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
Material and labour for preparation of old decorated plastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of old decorated steel surface over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of steel surface n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Supply and fix 125 mm size Butt hinges, heavy weight, cold rolled mild steel with galvanised MS sheet hinges pin anodised complete all as specified and directed.
Supply and fixing 50 mm size Butt hinges, heavy weight, cold rolled mild steel with galvanised MS sheet hinges pin anodised complete all as specified and directed.
Supply and fixing 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.
Supply and fix 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fix mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate complete all as specified and directed.
Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.06 sqm but not exc 0.11sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.complete all as specified and directed.
Material & Labour glazed ceramic coloured tiles 350 x 250 x 7 mm thick of premium quality on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over backing coat of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
Material & Labour machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.
All as per item No. 40 above but as in dado/skirting,riser etc including backing coat of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed.
Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc complete all as specified and directed.
Material and labour for 10 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surface, finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 5 mm thick rendering in CM (1:3) on fair face of concrete surfaces as in ceiling etc finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in CM (1:4) on concrete surfaces mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, applying one coat of cold bitumenous primer @ 0.25 lits per sqm conforming to IS 3384-1986, and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.50 Kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over Bitumenious primer (Application of polymerie memberane shall be by torch application, over laps shall be minimum 100mm on the transverse direction & 75 mm on the longtudinal direction) coved fillet in PCC (1:2:4) type B-0 of radius 75 mm shall be provided at the junction of roof & other vertical surfaces & surfaces shall be painted with hot paving bitumen of penetration value 30/40 conforming to IS 73 @ 1.20 kg/sqm over a coat of bitumenous primer @ 0.30 ltrs per sqm & applying one coat of aluminium paint over the APP nmodified membrane @ 0.11 kg/sqm including taking down existing Roof Treatment of any description and removing rubbish to a distance not exceeding 50m complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
Supply only integral water proofing compound complete all as specified and directed.
Material and labour for complete removal of internal wall finishes by scrapping down and preparation of old plastered surfaces by applying 2 mm wall care putty and applying two coats of oil bound distemer over a coat of primer on old plastered surfaces .
Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemer over a coat of primer over 2 mm thick wall care putty on new plastered surfaces complete all as specified and directed.
Material and labour for complete removal of existing treatment from old decorated plastered wall surface and applying two coats of weather coat paint over a coat of primer after applying 2mm thick wall care putty including preparation of old plastered surfaces to receive paint complete all as specified and directed.
Material and labour for preparation of newly plastered surface plastered wall surface and applying two coats of weather coat paint over a coat of primer after applying 2mm thick wall care putty complete all as specified and directed.
S & F 4mm thick E board of size 600 X 600 mm of approved texture, design and patterns, suspended on the Exposed Metal Frame Ceiling Grid of 600mm x 600mm size and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer and including suspended Exposed Inter-locking Metal Frame Work using GI Main "T" Runner of size 24x38mm, 0.33mm thick, spaced 1200mm centre to centre, Cross "T" of size 24X32mm, 0.33mm thick, 1200 mm long spaced between Main "T" at 600 mm centre to centre to form a grid of 1200X600 mm and secondary Cross "T" of 600mm long and of size 24X32mm, 0.33mm thick of the 1200x600mm panel to form grid of size 600x600mm, resting on periphery walls / partitions on GI Perimeter Wall Angle of size 24X24X3000 mm, 0.40 mm thick with the help of rawl plugs at 230mm centre to centre with 40mm long dry wall SS Screws including cutting/making opening for services like diffusers, grills, light fittings, smoke detectors etc., wherever required. Main "T" Runners shall be suspended from ceiling using galvanised mild steel [Galvanizing @ 80 Grams per Sq.m] 50 mm long, 8 mm outer diameter M-6 Dash Fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-Shape level adjuster of size 85x25x25x2 mm, spaced at 1200mm centre to centre along Main "T". Bottom exposed width of 25 mm of all sections shall be pre-painted with polyester baked paint at all heights complete all as specified and as directed.
Supply & fixing in repairs gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Supply & fixing in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. ( Minimum weight 60 gms ) complete all as specified and directed.
Supply and fix in repairs Vitreous China Urinal, Half stall type, white and waste coupling of PTMT (half or full threaded minimum weight 40mm-60 gms excluding flushing cistern, flush pipe and waste pipe ) urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement ; flush pipe, grating and unoin for discharge pipe complete all as specified and directed.
Supply and fix in repairs vitreous china WHB of size 550x400mm including waste fittings, brass, chromium plated with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed etc complete all as specified and directed.
Supply and fix in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
Supply and fix in repair PVC connector 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
Supply and fix in repairs 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
Supply and fix in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and directed.
Supply and fix 20 mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed.
All as per item No. 61 above but 15 mm bore -ditto-
Material & Labour for providing 75 mm thick plain cement concrete 1:3:6 type C-2, using (40 mm graded brick aggregate) as in path or paveway or plinth protection finished the surface fair and even complete all as specified and directed.
Material and labour for 25 mm thick PCC 1:2:4 Type B-0, using 12.5 mm graded stone aggregate as in floor and the surface shall be finished rough to receive the topping layer complete all as specified and directed.
Supply and fix in repair 500 ltrs capacity rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position complete all as specified directed.
Supply and fix in repair 20 mm bore ball brass valve high pressure with polythene float & fly nut compelete screwed for iron pipe or brass ferrule complete all as specified directed.
Supply and fix in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified directed.
Supply and fixing in repair low density polythene (LDPE) pins of pressure rating 6 Kg/Sq cm bore of tube 32 mm for waste pipe of WHB or sinks etc complete all as specified directed.
Supply and fixing in repair low density polythene (LDPE) pins of pressure rating 6 Kg/Sq cm bore of tube 40 mm for waste pipe of urinal etc complete all as specified directed.
Supply and fix in repair 75 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed.
Supply and fix in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed.
Supply and fix 75 mm bore PVC (SWR) bends in any types complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) bends in any types complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
Supply and fix in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes complete all as specified and directed.
Supply and fix in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.
Material and labour for Second class hard wood in small fittings such as wooden cleats stopper including all necessary labour article n.exc 200 Cucm each complete all as specified and directed.
Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) complete all as specified and directed.
Material and labour Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and directed.
Material and labour for PCC 1:3:6 type C2 using 40 mm graded aggregate as in surface channel/drain complete all as specified and directed.
Material and labour extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred stoped end etc complete all as specified and directed.
Add or deduct to or from item No. 81 above for each 25mm girth or part thereof over or under 30 cm ditto
Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Erection & fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. (Note: Materials retrive from item No. 84 shall be re-used)
Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed.
Supply and fix rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes ,without and attachment of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.
Supply and fix mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Dia of bolt 16 to 20mm and length exc 25cm long and n exc 30cm complete all as specified and directed.
Supply and fix mild steel work in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.
Material and labour for preparing of new surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed.
Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.
Material and labour for hardcore of broken bricks gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.
Material and labour for PCC 1:4:8 type D2, using 40 mm graded stone aggregate as in foundations filling and mass-concrete complete all as specified and directed.
Material and labour for RCC M20 nominal mix type A1 using 20 mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed.
Material and labour for RCC M20 nominal mix type A1 using 20 mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.
Material and labour for formwork to sides of pillars, posts, struts, columns and stanchions etc, Square, rectangular or polygonal flat surface, fair finished complete all as specified and directed.
Material and labour for M20 nominal mix type A1 using 20 mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
Material and labour for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed.
Material and labour for RCC M20 nominal mix type A1 using 20 mm graded aggregate in Chajjas complete all as specified and directed.
Material and labour formwork to chullah hoods, chajjas, troughs & similar items including edges Fair finished surfaces of concrete flat complete all as specified and directed.
M&L PCC 1:2:4 (using 12.5mm graded agg) in roof kerbs, rounded or chamfered or haunching in chajjas to prevent water seepage into brick walls including necessary formwork and scaffolding up to a height of 8 m complete all as specified and directed.
Material and labour for mild steel TMT bars 10 mm dia and over, cut to lengh, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item ser No. 104 but as in stirrups, spacers and binder, 8mm dia TMT bar
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated soil exc 250m but n exc. 500m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Demolition of RCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.
Material and labour for 15mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:4 and finished the surface fair and even with out using extra cement complete all as specified and directed.
Supply and fix in repair fancy type CP curtain rod 25 mm dia incl side knobs and brackets complete all as specified and directed.
Material and labour for two coat of cement base paint on new plastered surface including preparation of surface and chalk whitening complete all as specified and as directed
Material and labour for compete removal of existing surface and Finishing walls two coat of cement base paint on old painted surface including preparation of old surface and chalk whitening complete all as speified.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. (Note: Compacted thickness shall be measured for payment purpose)
Material and labour 25 thick P.C.C (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in floor finished rough.
Material and labour for of coloured Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) of premium quality area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and directed. Note: The colour / shade / design of tiles shall be as approved by GE.
Material and labour for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) of premium quality area of each tile exceeding 0.18Sqm but n. exc. 0.36 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor complete all as specified and directed. Note: The colour / shade / design of tiles shall be as approved by GE.
Material and labour for fabrication and fixing of anodised Powder Coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section 114mmx 44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.5 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm, screws etc. for fixing fully including all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter 1no 200mm long aluminium tower bolt and 3Nos 125 mm long Stainless steel Butt hinges per shutter including taking down old onecomplete all as specified and as directed.
Supply and fix of Powder coated (minimum 50 micron thick) aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. (Note: Window opening size to be measured.)
Supply and fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and ddirected.
Taking down carefully existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
.-Ditto- all as per item No 121.00 here-in-before but for 3 pin 6 amps socket outlet on the independant board .
.-Ditto- all as per item No 121.00 here-in-before but for 3 pin 6 amps socket outlet on the same board.
.-Ditto- all as per item No 121.00 here-in-before but for one 3 pin 16 Amps socket outlet on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply & fixing switch socket combination multi purpose 2 in 1, 5 Pin, 6 and 16 Amps, flush type complete all as specified and as directed.
Supply and fixing switch socket combination 5 Pin, 5 Amps flush type complete all as specified & directed.
Supply and fixing socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.
Supply and fixing Socket Outlet, 3 pin, 16 Amps and 1 pin, 5 Amps, Flush Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 50mm, ISI marked three terminals complete all as specified & directed.
Supply and fixing electronic fan regulator (step rotary type), AC 240 volt complete all as specified and as directed.
Supply and fix sheet metal enclosure TPN DBs (Double door) 4 way with 200 amps rated busbar suitable for MCB including taking down old unserviceable enclosure complete all as specified as directed.
Supply and fixing sheet metal enclosure MCB DB SPN for 12 way DBs double door type 240volts, 200 Amps rated bus bar ,IP-43,IK -09 with metal door including necessary connection including taking down old unserviceable enclosure all as specified and as directed.
Supply and fixing sheet metal enclosure MCB DB SPN for 8 way DBs double door type 240volts, 200 Amps rated bus bar ,IP-43,IK -09 with metal door including necessary connection including taking down old unserviceable enclosure all as specified and as directed.
Supply and fixing sheet metal enclosure MCB DB SPN for 4 way DBs double door type 240volts, 200 Amps rated bus bar ,IP-43,IK -09 with metal door including necessary connection including taking down old unserviceable enclosure all as specified and as directed.
Supply and fixing MCB, single pole 'C' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified & directed.
Supply & Fixing MCB SPN having braking capacity 10 KA, 40 Amp, 240 Volt 'C' Curve complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting complete all as specified and directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Materials and labour for sub main wiring with two single core, FRLS, multi stranded, PVC insulated, 1100 Volt grade, cable with copper conductor of size 2.50 Sqmm in and drawing through PVC casing capping including continuous PVC insulated copper conductor single core earth continuity conductor of size 2.50 Sqmm connected common earth complete all as specified and as directed. Note : (i) 3 Runs of 2.50 Sqmm cable and one run of 20mm dia conduit shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete Including taking down old unserviceable light fitting complete all as specified and as directed.
Supply and fix sheet metal enclosure / TPN DBs (Double door) 6 way with 200 amps rated busbar suitable for MCB including taking down old unserviceable enclosure complete all as specified as directed.
Supply and fix MCB triple pole & neutral 63 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections suitable for 4 way type TPN DB in double door with proper size of aluminium lugs complete all as specified as directed .
Supply and fix lamp holder insulated body with back plate for batten fitting incl dismentling taking down unsv one all as specified and as directed.
Supply & Fix sheet metal enclosure with single door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt inculding taking down the old unserviceable one all as specified as directed .
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size inculding taking down the old unserviceable one and depositing the same at E/M store all as specified and directed.
S & F Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep of any colour as approved, 03 blades, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 374, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, including Down Rod, Canopies, Shackles, Safety Rope, Hanging Clamps, Bushes, having P.F >0.95, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5% including provision of Electronic speed control Regulator step type, including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down of existing unserviceble ceiling fan and depositing the same at E/M store complete all as specified and as directed.
Supply & Fixing sheet metal enclosure single pole and neutral with two pin & earth plug with socket complete with one single ploe MCB 20 Amps, SP 240 volts 'C' series inculding taking down the old unserviceable one complete all as specified and directed.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC conduit size of 20mm dia with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces inculding taking down the old unserviceable one all as specified as directed. Note : (i) 3 Runs of 6.00 Sqmm cable and one run of conduit of 20mm dia shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC conduit size of 20mm dia with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4 sqmm as earth lead and connected to earth dolly and making good to disturbed surfacesinculding taking down the old unserviceable one all as specified as directed. Note : (i) 3 Runs of 4.00 Sqmm cable and one run of conduit of 20mm dia shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 10 Sqmm 2 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc including taking down unservicable cable complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for laying cable etc. or for foundation of pole etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed .
Removing exvated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed .
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down complete all as specified and as directed. (Note: Punned thickness shall be measured for payment purpose)
Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed.
Supply and laying GI tubing 50mm bore light grade with fittings laid in trenches or for road crossing for protection of LT underground cables including taking up/down unserviceable pipe complete all as specified and as directed.
M & L for Cutting Bituminous Road / Hardstanding etc. as required for Jointing / Laying Cables and Pipeline of width not exceeding 300mm and depth not exceeding 600mm and refilling after laying and making good with PCC 1:2:4, Type B1 using 20mm graded stone aggregate, 100mm thick complete all as specified and as directed.
Supply and fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including taking down of unserviceable gate valve complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors including taking down of existing unserviceable pipes complete all as specified and as direcetd.
M/s Amrit Gope
SHRI RAJESH DEY
Pranjit kar
M/S PRITAM ENTERPRISES
M/S SANKAR GOPE
M/S PAUL ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .