GE(S) BTD TOKEN NO 79 OF 2023-24 CERTAIN BR REPAIRS INCLUDING ATTENDING DAY TO DAY COMPLAINTS IN BASANT BAGH AND BANA SINGH ENCLAVE AND CERTAIN REPAIR AND MAINTENANCE AT SEWAGE PUMP HOUSE NO 1 TO 7 AND LT PANEL BOARD UNDER AGE BR II AND AGE EM IV UND

Amount

Taking down chowkats or frame with shutter (without taking off shutters from the frames) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in Preamble 8B.3.1 of SSR Part -II (2020) and all as shown on drawing of SSR Part-II (2020) including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 176 complete all as specified and directed.

Supply and fixing aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed.

S & F 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F aluminium anodized handles cast type 125mm long complete all as specified and directed

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exceeding 1.50 sqm but not exceeding 4.00 Sqm each and removal from site complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkhats and for fixing hold fasts, etc., complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removed from site complete all as specified and directed.

S & F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part-II) complete all as specified and directed.

Supply and fixing 35 mm thick , glazed or gauged skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with or without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. Note - Wire gauze / glass to be measured and paid separately

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkhats, complete all as specified and directed.

S & F 30mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised fising to wooden frame etc complete all as specified and directed.

M&L for painting to new wood and wood based surfaces any description, over 10cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed.

S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed.

Supply and fixing 300mm long mild steel sliding door bolts with hasp and staple, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed complete all as specified and directed.

S & F mild steel barrel tower bolts, 150mm long, stove enamelled black with bright bolts and and fixed (ISI marked) complete all as specified and directed.

S & F mild steel pressed handles, 150mm long, oval type stove enamelled black etc. complete all as specified and directed.

Hacking out old broken glass exc 1.5sqm (any thickness size, quality or description) from metal frame including punching or drilling out glazing pins/ springs clips and etc. complete all as specified and directed.

Dismantling / Taking down 15mm dia bib cock/ stop cock / angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc. or re-fixing old serviceable bid cock /stop cocks any patern complete all specified and directed.

Supply and fixing in repairs bid cock PTMT standard 15mm dia of any colour high pressure screwed for iron pipe and fixed 9Male or Femaleas required ) etc. complete all as specified and directed.

Supply only Jumper valve brass with rubber or leather washer complete for 15mm dia bib cock / stop cock brass complete all as specified and directed.

Supply only spindle brass for 15mm dia CP bib cock / pillar cock/ concealed cock of any pattern complete all as specified and directed.

S & F in repairs PVC Knob/ Handle (as per sample) for 10 Ltrs capacity PVC low level flushing cistern complete all as specified and directed.

S & F in repairs PVC Syphon Kit (as per sample) for 10 Ltr capacity PVC low level flushing cistern complete all as specified and directed.

S & F in repairs Jet Spray , CP Brass body with wall hook and 1 Mtr SS pipe complete all as specified and directed.

S & F in repairs Tank Nipple of suitable size at required on ground complete all as specified and directed.

S & F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32 / 40mm dia and of length minimum 75cm complete all as specified and directed.

Supply and fixing 32/40mm waste fittings, brass chromium plated for glazed ware sinks , basins , etc with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and as directed.

S & F in repairs PVC connection 15mm size with brass nuts of length 600mm of approved quality etc complete all as specified and directed.

S & F in repairs PVC connection 15mm size with brass PTMT nuts of length 450mm of approved quality etc complete all as specified and directed.

S & F in repair hand health faucet etc. complete all as specified and directed.

S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Dismantling Plain or corrugated FRP sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F 2 mm Thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc

Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

Supply and fixing in repair bib taps, CP Brass or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .

S & F in repair bib taps, cast copper alloy crutch or butterfly handle, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and directed.

S & F in repairs 15mm bore pillar taps, fency type, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure , with or without letter HOT or COLD with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs stop valve for 15mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule etc. complete all as specified and directed.

S & F in repairs stop valve for 15mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, with long shank and cup (concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule etc. complete all as specified and directed.

S & F in repairs 125mm brass chromium plated, shower rose size, with swivel joints , including fixing to steel pipe or union, etc. complete all as specified and directed.

S & F in repairs CP grating (with or without waste hole) 125/150mm size fixed on floor/ nahani traps etc complete all as specified and directed.

S & F in repairs plastic water seat cover, white /ivory colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc, complete all as specified and directed.

S & F in repairs for PVC cover for ovrhead water tanks of any capacity (as per sample) complete all as per specified and directed.

M&L for 25mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing pipes of any description with accessories complete all as specified.Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S & F in repairs Mild steel galvanised wire cloth 0.56mm nomonal dia of wire and 1.18mm average width of aperture fixed tinned tacks or galvanised wire staple, etc complete all as specified and directed.

S & F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple, length bolt 250mm, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cat-aluminium alloy and fixed , etc complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section, 150mm long (ISI marked) complete all as per specified and directed.

S & F aluminium anodised handles, 125mm long, cast type, (ISI marked) etc complete all as specified and directed.

S & F in repairs floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring etc complete all as specified and directed.

Supply and fixed in repair stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minium weigth 15mm-90gms/ 20mm-92gms) etc. complete all as specified and as directed.

Supply and fixed in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high dencity plastic ball screwed for iron pipe of size 20mm bore (weigth 210 gms minimum) etc. complete all as specified and as directed.

S & F in repairs CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed etc complete all as specified and directed.

Supply and fixing in repair 300mm long mild steel ordinary rat tail rod pattern spring for doors including roller, and roller plate etc complete all as specified and directed.

Supply and fixing 3.00mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane etc complete all as specified and directed.

Supply and fixing 3.00mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane etc complete all as specified and directed.

Supply and fixing 4.00mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane etc complete all as specified and directed.

Supply and fixing in repairs decorative type 25mm dia MS powder coated curtain rod complete with fancy type caps and end brackets etc complete all as specified and directed.

M & L for in repair running welding thickness of metal to be welded not exeeding 6mm etc complete all as per specified and directed.

M & L for 16 to 18 mm thick MDF board pre-laminated MDF board, exterier grade (grade-I) confirming IS 14587, fixed with nails for kitchen cupboard and cabinet , self for cupboard, frame with door if required including 3mm thick 2nd class hard wood leeping patti on cut edge of boards in repairs etc complete all as per specified and directed.

Supply and fixing 100 mm long extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified and directed.

Resecuring or easing and adjusting shutters of any description not exeecing 1 sqm each, without taking down shutters complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, removal to store etc complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, removal to store etc complete all as specified and directed.

M & L for 20mm bore, 'Medium grade' GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed .

M & L for 15mm bore, 'Medium grade' GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed .

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

Supply and Fixing in repairs vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cartilever bracket 32mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and directed.

S & F in repairs vitreous china (white) squatting pan 'Orissa' pattern, white size 580 x 440 x 260mm with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, antisyphonic pipe etc including making good to floor and including trap set, in and including lime concrete etc complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white , including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed.

S & F in repair 10Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackes including 32mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Supply only of Liquid water proofing compound of approved make complete all as specified and as directe.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of Acrylic emulsion distemper over a coat of suitable primer including a layer of 2 to 3 mm thick wall putty all as specified and directred.

M&L for complete removal of existing treatment on old plastered surfaces applying two coats of acrylic emulsion distemper over a coat 2 to 3mm tkick wall putty all as specified .

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material and labour three coats of white wash on newly plastered surface of wall including preparation the surface of on walls complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

M&L for complete removal of existing treatment on old plastered surfaces applying two coats of cement base paint all as specified .

M&L for complete removal of existing treatment on old plastered surfaces applying two coats weather proof exterior emulsion paint all as specified .

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

Disconnecting existing tanks of capacity in liters exc 250 & n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).

Cleaning of water tanks exceeding 250 ltr and not exceeding 500 ltr capacity including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed

Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.

M&L 40mm thick brick tiles on mud mortar and joints grouted flush and pointed in CM (1:3) mixed with crude oil @ 5% by weight of cement on mud phuska,incl.Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material out of MOD land complete all as specified and directed .

M&L Rendering 15 mm thick C:M 1:4 mixing with WPC @ 200 ml/bag of cement on fair faces of concrete/brick tile surfaces on roof slab after wire brushing and cleaning top surface all as specified NOTE: WPC will be measured and paid for separately under respective item.complete all as specified and directed .

M & L for cleaning of old Roof top/ concrete surfaces incl uprooting al grass/plants etc& applied a coat of bituminous primer over cleaned surface @ 0.30 ltr/Sqm followed by APP based ploymeric membrane 3mm thick, minimum wt 3.00 kg/Sqm reinforced with polyester non-wove fabric (weighing not less than 150gms/Sqm ) laid on primed roofs & flashing by forced application using Butane torch, and sealing all joints & finally finished with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed .

M&L for cleaning of Roof wall concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum wt 3.6 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sqm) manufactured by M/S STP Ltd india Ltd/ M/S IWL india Ltd or its equivalent laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm complete all as specified and as directed

M & L in repair PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks etc complete all as specified and directed.

Pressed steel shutter for cupboard with sheet thickness not less than 1.2 mm made to shape as shown on drawing with and including locking arrangement, handles and one shop coat painting complete all as specified shown on drawing. Note : Referred drg is applicable for shutter and frame only.

Surface Excavation in loose or soft soil n.exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified.

Sand filling 25mm thick under floors or in foundation complete all as specified and directed.

60mm thick inter locking PCC block of M-35 as per IS 15658-2006 approved design made out of grey cement and no pigment laid complete all as specified and directed.

75mm thick Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

S & F in repair 15mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe complete all as specified and directed.

S & F in repair 20mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe complete all as specified and directed.

S & F in repair PVC waste pipe 32/40mm dia and fixed etc. complete all as specified and directed.

Supply & Fixing in repairs brass chromium plated tubular towel rail, 20mm dia, D type , 60cm long between flanges etc. complete all as specified and directed.

S & F in repairs kitchen plate rack of steel 1mm thickness size 900 x 900 x 250mm of weight not less than 8 kgs complete all as specified and directed.

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed.

Dismantling existing broken unserviceable PVC Tank of capacity 500 Ltrs etc.complete all as specified and directred.

S & F in repair three lyers 500 Ltrs HDPE water storage tanks polyproof white in colour rotational moulded ploythylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement and other accessories etc complete all as specified and directred.

S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe etc. (ISI marked) complete all as specified and directed.

Taking down AC eaves gutters and rainwater pipes (any size and pattern ), including all fittings, heads, shoes, bends, swan-necks, etc complete all as per specified and as directed.

Supply and fixing 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps etc, complete all as specified and directed.

S & F 110mm bore, PVC (SWR) fittings such as bends, tee, shoe etc, fixed to PVC pipes, complete all as specified and directed.

Suuply and fixing door seal in wooden shutters including nails etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling / terrazo finish etc including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off of premises complete all as specified and as directed

M & L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15mm thick screed plaster in CM 1:6 complete all as per specified and as directed.

M & L for joint free glazed ceramic coloured tiles of approved quality in verticla surfaces 450 x 300 x 7mm / 600 x 300x 7mm thick set jointed in neat cement slurry /paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1: 4 complete all as specified and directed.

M & L for Non-skid foor tiles , coloured, of size 600mm x 600mmx 7mm thick set jointed in neat cement slurry /approved as in floors set and jointed in neat cement paste and pointed in coloured cement to match with the tiles over and including 15mm thick plaster in CM 1: 6 complete all as specified and directed.

Description all as per Serial item No 124 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and directed.

M & L in repairs not exceeding 1sqm plastering in patches to ceiling surfaces average thickness 15mm in two layers in CM 1:3 etc complete all as specified and directed.

M & L for in repairs 15mm thick rendering in patches to brick / concrete surface of walls / roof in CM 1: 6 as complete all as specified and directed.

Cleaning & Desludging by removing semi solid sludge from the sump well / pump wells of any capacity at any depth at sewage pump house installation, mechanically in foul condition including all necessary T&P required for removal of sludge and solid contents to any place out side the defence land without any extra cost etc complete all as specified and directed .

Supply only for stable bleaching powder of 25 Kg bags etc complete all as specified and directed .

Cutting / cleaning away all grass, bushes , under growth tree roots , hedges, vegetation, branches of trees etc around 10 m radius of installation of pump house to the entire satisfaction of Engineer in charge and disposing the same at a distance upto 50 mtr away from the periphery area etc complete all as specified and directed

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwd the other, or screwed both ends, each screwd end to be fitted with washers and one hexagonal or square nut. Exc 5 cm and not exc 20 cm with neck dia from 5 to 15mm complete all as specified

S&F in replacement power contactor 3TF 50 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 49 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 48 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 47 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 45 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement Bimettalic relay amp range (70-95A) etc including internal wiring in panel complete all as specified and directed .

S&F in replacement Bimettalic relay amp range (32-50A) etc including internal wiring in panel complete all as specified and directed .

S&F in replacement Bimettalic relay amp range (16-25A) etc including internal wiring in panel complete all as specified and directed .

Supply and fixing in replacement Electronic timer switch (03-60 Sec) suitable for star delta starter 230-440V etc complete all as specified and directed .

S&F in replacement MCCB 3 pole ,415volt ,adjustable type 63 A with breaking capacity 16KA complete all as specified and directed .

S&F in replacement MCCB 3 pole ,415volt ,adjustable type 125 A with breaking capacity 16KA complete all as specified and directed .

S&F in replacement MCCB 3 pole ,415volt ,adjustable type 200 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement MCCB 4 pole ,415volt ,adjustable type 200 A with breaking capacity 25KA complete all as specified and directed .

S&F in replacement MCCB 4 pole ,415volt ,adjustable type 250 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement MCCB 4 pole ,415volt ,adjustable type 400 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement 3 phase , class 0.5, digital panel mounted Volt meter in 96 x 96 Sqmm flush mounted case including internal wiring in panel complete all as specified and directed .

S&F in replacement 3 phase , class 0.5, digital panel mounted Ammeter in 96 x 96 Sqmm flush mounted case including internal wiring in panel complete all as specified and directed .

S&F in replacement for ON LOAD change over switch in sheet metal encloser 415 V with side handle operation of rating 400 amp complete all as specified and directed .

S&F in replacement for ON LOAD change over switch in sheet metal encloser 415 V with side handle operation of rating 125 amp complete all as specified and directed .

M & L for two coats of approved synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation / scrapping of old painted surfaces of the LT panel complete and spray painting the same with etc complete all as specified and directed .

Supply and fixing in replacement of cast iron sluice valve double flanged of size 300mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement of cast iron sluice valve double flanged of size 250mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement of cast iron sluice valve double flanged of size 150mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

Supply and fixing in replacement of cast iron sluice valve double flanged of size 100mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

Supply and fixing in replacement of cast iron NON Return Valve double flanged of size 300mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

Supply and fixing in replacement of cast iron NON Return Valve double flanged of size 250mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement of cast iron NON Return sluice Valve double flanged of size 150mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement of cast iron NON Return sluice Valve double flanged of size 100mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

S&F in replacement Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 40 mm dia iron pipe complete all as specified and direceted .

S&F in replacement Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm dia iron pipe complete all as specified and direceted .

S&F in replacement 40mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S&F in replacement 25mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

Disconnecting of defective burnt elect Motors from pumps after removing all connection like electrical, earthing etc, removing of motors of capacity 05 to 100 HP from 9 meter deep underground pump well foundation, taking to civil workshop for repairing Motors any make and model, in which replacement of defective/unserviceable parts such as bearing,bearing cover, Copper Winding with existing turn, shaft, bush, etc. Reassembling including oiling, greasing, varnishing replacement of worn out nuts, bolts, gasket etc, refixing on its original position(9 meter deep underground pump well foundation ), making all connections, commissioning and testing at full load etc complete all as specified and directed. Note :- (i) Cost of major parts like bearing, shaft, bush, bearing cover shall be measured and paid separately under respective item of schedue. (ii) Cost of other minor item like thimble, lugs, connection plate, lead, gasket, nuts, bolts, etc essential for functioning of motor & are deemed to be included in quoted rate. (iii) Copper wire for rewinding of motor shall be measured and paid separately. (iv) Transportation, meggering, reconnection & testing, required T&P for work is deemed to be included in quoted rate

Supply super enameled copper wire of existing gauge as original including insulation material with insulation class ‘B’ varnishing, in r/o item No 37 complete all as specified and directed .

Disconnecting of unserviceable pump from motors after removing all electrical/mechnical connections etc of capacity 5 to 100 HP from 9 meter deep underground pump well foundation, taking to civil workshop for repairing of pumping sets any make and model , in which replacement of unserviceable parts such as bearing, bearing cover, shaft, bush, Impeller,Gland Bush, coupling etc. Reassembeling the pump and refixing on its original position(9 meter deep underground pump well foundation ), making all connections, commissioning and testing at full load complete all as specified and directed. Note : (i) Cost of spare parts (Impeller,Bearing,Gland Plate,Gland Bush ,Shaft, coupling, bearing cover Etc )shall be measured and paid separately under respective item of schedule here after. (ii) Cost of other minor item like gasket, nuts, bolts, etc necessary for efficient functioning of pump is deemed to be included in unit rate of item. (iii) Transportation, reconnection & testing, required T&P for work is deemed to be included in quoted rate

Supply only Gland Bush suitable for pump set of capacity 100 HP pump etc in r/o item No 166 complete all as specified and directed .

All as per SI item No 167 but of 75 HP capacity .

All as per SI item No 167 but of 60 HP capacity .

All as per SI item No 167 but of 25 /20HP capacity .

All as per SI item No 167 but of 5 HP capacity .

Supply only Gland plate suitable for pump set of capacity 100 HP pump etc in r/o item No 39 complete all as specified and directed .

All as per SI item No 172 but of 75 HP capacity .

All as per SI item No 172 but of 60 HP capacity .

All as per SI item No 172 but of 25/20 HP capacity .

All as per SI item No 172 but of 5 HP capacity .

Supply only CI Impeller suitable for pump set of capacity 100 HP pump etc in r/o item No 166 complete all as specified and directed .

All as per SI item No 177 but of 75 HP capacity .

All as per SI item No 177 but of 60 HP capacity .

All as per SI item No 177 but of 25/20 HP capacity .

All as per SI item No 177 but of 5 HP capacity .

S&F in replacement coupling tyre(coupler no. 14,16,18,19,8,8,11) which is suitable for pump set of capacity 100 HP pump etc complete all as specified and directed .

All as per SI item No 182 but of 75 HP capacity .

All as per SI item No 182 but of 60 HP capacity .

All as per SI item No 182 but of 25/20 HP capacity .

All as per SI item No 182 but of 5 HP capacity .

Supply only high carbon steel shaft for existing size for 100 HP Pumping set for smooth running in r/o item No 166 complete all as specified and directed .

All as per SI item No 187 but of 75 HP capacity .

All as per SI item No 187 but of 60 HP capacity .

All as per SI item No 187 but of 25/20 HP capacity .

Supply only coupling which is suitable for pump set of capacity upto 100 HP pump etc in r/o item No 166 complete all as specified and directed .

All as per SI item No 191 but of 75 HP capacity .

All as per SI item No 191 but of 60 HP capacity .

All as per SI item No 191 but of 25/20 HP capacity .

All as per SI item No 191 but of 5 HP capacity .

Supply only Bearing cover suitable for 100 HP pumping set in r/o item No 166 complete all as specified and directed.

All as per SI item No 196 but of 75 HP capacity .

All as per SI item No 196 but of 60 HP capacity .

All as per SI item No 196 but of 25/20HP capacity .

All as per SI item No 196 but of 5 HP capacity .

Supply only ball bearing cat No 6311 etc in r/o item No 164 & 166 complete all as specified and directed

Supply only ball bearing cat No 6313 etc in r/o item No 164 & 166 complete all as specified and directed .

Supply only ball bearing cat No 6309 etc in r/o item No 164 & 166 complete all as specified and directed .

S&F in replacement Gland Packing suitable for 100HP pump in r/o item No 166 complete all as specified and directed

S&F in replacement Gland Packing suitable for 75HP pump in r/o item No 166 complete all as specified and directed

S&F in replacement Gland Packing suitable for 60HP pump in r/o item No 166 complete all as specified and directed

S&F in replacement Gland Packing suitable for 20/25HP pump in r/o item No 166 complete all as specified and directed

Material and labour for MS work as in plateform/frames. Clamps / base frame made out of angle , channels ,flat iron , MS Sheet including cutting, welding cold or hot , rivetting , locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer on exposed surface etc complete all as specified and directed.

M & L for painting of pumpset with motor with two coat of synthetic enamel paint over a coat of red oxide primer including preliminary preparartion, scrapping old paint with wire brush cleaning of pump set with cotton cloth before painting and writing of SM/MES No all as directed for the following capacities:-

All as per SI item No 209 but of 100 HP capacity .

All as per SI item No 209 but of 75 HP capacity .

All as per SI item No 209 but of 60 HP capacity .

All as per SI item No 209 but of 20/25 HP capacity .

All as per SI item No 209 but of 5 HP capacity .

Preparation / scrapping of old painted surfaces of the DG Set including radiator, fuel tank, alternator assembly etc all parts of DG sets, complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos on DG sets of following capacities etc complete all as specified and directed

All as per SI item No 215 but of D.G Set 250 KVA

All as per SI item No 215 but of D.G Set 160 KVA

All as per SI item No 215 but of D.G Set 62.5/70 KVA

All as per SI item No 215 but of D.G Set 25/34 KVA

S&F in replacement Air filter (outer) suitable for 250 KVA capacity DG set.

All as per SI item No 220 but of 160 KVA capacity .

All as per SI item No 220 but of 70 KVA capacity .

All as per SI item No 220 but of 62.5 KVA capacity .

All as per SI item No 220 but of 34/25 KVA capacity .

S&F in replacement Air filter (inner) suitable for 250 KVA capacity DG set.

All as per SI item No 225 but of 160 KVA capacity .

All as per SI item No 225 but of 70 KVA capacity .

All as per SI item No 225 but of 62.5 KVA capacity .

All as per SI item No 225 but of 34/25 KVA capacity .

S&F in replacement Oil filter suitable for 250 KVA DG set including changing of engine oil complete all as specified.

All as per SI item No 230 but of 160 KVA capacity.

All as per SI item No 230 but of 70 KVA capacity .

All as per SI item No 230 but of 62.5 KVA capacity .

All as per SI item No 230 but of 34/25 KVA capacity .

S&F in replacement Fuel filter suitable for 250 KVA capacity DG set.

All as per SI item No 235 but of 160 KVA capacity.

All as per SI item No 235 but of 70 KVA capacity .

All as per SI item No 235 but of 62.5 KVA capacity .

All as per SI item No 235 but of 34/25 KVA capacity .

S&F in replacement heavy duty water/coolant rubber hose pipe of any shape as per existing for DG set any capacity all as directed.

S&F in replacement 'V' belt as per existing size suitable for 250 KVA capacity DG set.

All as per SI item No 241 but of 160 KVA capacity.

All as per SI item No 241 but of 70 KVA capacity .

All as per SI item No 241 but of 62.5 KVA capacity .

All as per SI item No 241 but of 34/25 KVA capacity .

Material and labour for disconnecting / dismentling of self starter from DG set 160 KVA capacity by removing all electrical connections and carring out to work shop for replacing the defecting parts, main shafts, bendex, pinion bearing, DE/CE bush, field coil assembly all including and greasing and refitting and carrying back and connecting, testing complete all as specified and directed .

Ditto all as per SI item No 246 but of 250 KVA capacity.

Ditto all as per SI item No 246 but of 70/62.5 KVA capacity.

Ditto all as per SI item No 246 but of 34/25 KVA capacity.

Material and labour for disconnecting / dismentling of dynamo from DG set 25/34 KVA capacity by removing all electrical connections and carring out to work shop for replacing/repair of defective parts like rectifier, carbon brush, replacement of armature winding, repair of commutator all including and refixing the same at site after repair including necessary testing complete all as specified and directed .

All as per SI item No 250 but of 62.5/70 KVA capacity.

All as per SI item No 250 but of 160 KVA capacity.

All as per SI item No 250 but of 250 KVA capacity.

Supply and Replacement of Engine Oil/Lubricant, 20W40 grade,suitable for Oil change of DG set of any capacity and any make complete all as specified and directed.

Attending complaint of motor/pump/panel /DG set at various locations by replacing spare parts/complaints etc complete all as specified and directed . Note :-(i) The contractor or his representative will attand the office of the Engineer-in-Charge daily (working day) at 0930 hours to collect the complaint slip and will provide atleast two mechanics for repair the moter/pump/panel/DG set of the same is included in the quoted rate.The complaint will be completed/done within 24 hours from the time of issue of complaint slip, failing which a panel recovery of Rs 100/- per complaint per day will be recovered from contractor due's and contractor will not have any claim on this account. (ii) Spare parts required against rectification/repair will be measured and paid for saperately)

Strip opening of portable pump sets for repair of any make and model of capacity upto 5 HP including replacement of defective / unserviceble parts such as bearing shafts, impeller, bush gland plate, remetalling of shaft for fixing of MS bush / bearing, nuts, bolts etc reassembeling the portable pump, making all connections, commissioning and testing at full load complete all as specified and directed .

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 16 sqmm 4 core complete all as specified and directed

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 95 sqmm 4 core complete all as specified and directed

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 120 sqmm 4 core complete all as specified and directed

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 240 sqmm 4 core complete all as specified and directed

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 100mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed .

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 150mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed .

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 250mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed .

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 300mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed .

Supply,installation,testing and commissioning (in replacement) centrifugal Non Clog Pump Set adhering specification not less than :- Suction & Delivery 125X100 MM, Discharge Capacity 65 L.P.S. at 16 Mtrs Head complete with coupled AC Squirrel cage Induction Motor 3 Phase 415 Volt, 25 H.p ,19 K.W. Capacity & all including base plate, mechanical seals, drain connections and all necessary accessories.and must be compatible with existing piping infrastructure complete all as specified and directed

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth strip 25x4 mm upto 7.5m by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 40 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board/LT Panel and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified

Note:- Contractor / authorized repair shall daily collect the complaints from sub division duly signed by JE of complaints lodged in Armaan / maint mela and office on all working days and shall complete within 72 hrs otherwise recovery @ Rs 100/- per day per complaint shall be charged. The contractor will provide complaint slip as per format approved by Engineer-in-charge. The rates for providing complaint slip are inclusive in quoted rates of items in BOQ.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/S KARTIK BUILDERS

LM CONSTRUCTIONS

NAIB ENTERPRISES