Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.7 L
EMD Value
₹29,500
Closing Date
9 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE JABALPUR
JABALPUR
Repair/ Maint testing calibration of 33KV /11 KV VCBs, HT panels and allied switchgear Equipment and Repair/Maint of 33 x 11 KV Transformers, 11kv x 440 volt Transformers, HT Cable, HT Joint and other connected items of HT work under AGE (I) Naya Rai
2026_MES_799167_1
86078/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
RAIPUR
as per NIT
7 documents required · 7 mandatory
₹500
AGE I Raipur
₹29,500
Yes
18 Nov 2026
18 Nov 2026
16 Dec 2026
18 Nov 2026
9 Dec 2026
2 Dec 2026
18 Nov 2026 - 30 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Schedule "A" | - | - | - | - |
| 2 | M&L for Disconnect HT & LT connections of transformers outdoor, from plinth mounted in any location and shifting to workshop for carry out any repair works, as directed and install back in original location for the capacity up to 315 KVA :- | 1 | Each Job | - | - |
| 3 | Ditto- all as per above items No 2.00 but 1.6 MVA. | 1 | Each Job | - | - |
| 5 | Material and labour for rewinding for transformer up to 1600 KVA, of HV side copper winding with super enamelled copper wire of existing size , gauge and weight winding including wrapping of insulating tap and insulating material and heating the coil in the heat chamber to obtained desired result of insulating resistance complete all as specified and as directed by Engr-in- Charge. | 55 | Kgs | - | - |
| 6 | Material and labour for rewinding for transformer up to 1600 KVA, of LV side copper winding with super enamelled copper wire of existing size, gauge and weight including wrapping of insulating tap and insulating material and heating the coil in the heat chamber is obtained desired result of insulating insulating resistance complete all as specified and as directed by Engr-in- Charge.
NOTE FOR ITEM NO 3.00 & 4.00 :-
(i) Dehydration of Transformer oil shall be measured and paid separately.
(ii) The rate of corck sheet & and other Packing Material of Transformer are included in quoted rate . | 45 | Kgs | - | - |
| 7 | Supply and filling/ Top-up of fresh transformer oil confirming to IS 335 having di electric strength not less than 50 KV of one minute in existing transformers installed at different locations complete all as specified and directed by Engineer-in-Charge.
Make : Sheetal N-68/Power oil/Castrol with test certificate. | 400 | Ltr | - | - |
| 8 | S & F in replacement of transformer bushing of HT side (set of 03) with porcelain, brass rod, bolts, washers and packing sheet suitable for 1600 KVA transformer complete all as specified and directed by Engineer-in-Charge. | 1 | Each Set | - | - |
| 9 | Supply & fixing in replacement of transformer bushing of LT side (Set of 04) with porcelain, brass rod bolts washers and packing sheet suitable for 315 KVA transformer complete all as specified and directed by Engineer-in-Charge. | 1 | Each Set | - | - |
| 10 | Dehydration and filtration of existing transformer oil using centrifugal plant to eliminate foreign particles and to improve di-electric strength not less than 60 KV in 2.5mm electrode gap and to bring the acidity within the permissible limit complete all as specified and directed by Engineer - in - Charge. | 4,500 | Ltr | - | - |
| 11 | M&L for preparation of existing external painted surface of transformer 1600 KVA and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. | 2 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.99 MB
TENDER.pdf
Tender Documents • 2.11 MB
BOQ_896621.xls
BOQ • 1.82 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .