WBPWD/SEKHEC/KSHED/NIQ09/20-21

Amount

Supply & Installation exhaust pipe line (thickness 4 mm.) connection with MS black pipe ISI approved necessary flange, nuts, bolts, washers & gasket incl electrical welding wherw necessary.

350 mm (12") dia.

250 mm (10") dia.

150 mm (6") dia.

S&F 150 mm x 250mm MS heavy type reducing "T / "Y" for 750 KVA DG sets.

S&F 250 mm x 350mm MS heavy type reducing "T / "Y" for 1010 KVA DG sets.

S&F 350 mm MS heavy type long bend .

S&F 250 mm MS heavy type long bend .

S&F 150 mm MS heavy type long bend .

S&F 350 mm MS Plug incl socket with short piece.

S&F 250 mm MS Plug incl socket with short piece.

S&F rain protection canopy suitable for 350 mm MS pipe.

S&F rain protection canopy suitable for 250 mm MS pipe.

S&F of MS angle iron structure made of (80x80x6)mm / (50x50x6) mm MS angle 50mmx8mm MS flat, nut, bolt, washer etc to support 350 mm & 250mm dia MS pipe, chair for fuel tank & AMF panel etc incl painting as per GS.

Painting the 350 mm dia MS black pipe (approx 100 Mtrs) by Aluminum paint of two coat over the RO primer (Approved make).

Painting the 250 mm dia MS black pipe (approx 90 Mtrs) by Aluminum paint of two coat over the RO primer (Approved make).

Painting the 150 mm dia MS black pipe (approx 30 Mtrs) by Aluminum paint of two coat over the RO primer (Approved make).

Wrapping the residue type exhaust silenser pipe for 1010 KVA DG Sets.

Wrapping the residue type exhaust silenser pipe for 750 KVA DG Sets.

Wrapping the exhaust pipe line (350 mm) with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool as per direction of EIC.

Wrapping the exhaust pipe line (250 mm) with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool as per direction of EIC.

Wrapping the exhaust pipe line (150 mm) with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool as per direction of EIC.

S& delivery of 200 ltrs. Capacity barrel made of 2 mm thick MS Sheet.

Supply & delivery of best quality oil hand pump with 1" dia PVC flexible pipe (12' ft. approx.) (Brand approved by EIC)

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel trip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts (For Neutral for 2 nos 1010 KVA each & 2 nos 750 KVA DG Set each ).

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts (Body & AMF panel earthing for 1010 KVA & 750 KVA DG Set & for 4 nos DG Set).

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate electrode.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 65 mm x 8 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Extra for connecting the neutral of Transformer/Earth busbar to earth electrode including S & F 50 mm x 6 mm Galvanized (Hot Dip) steel strip on wall/floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape

Hiring charges for scaffolding by bamboo, coir rope by square type arrangement for smooth working and lifting of MS black pipe for vertical installation including dismantling after completion of work.

Supply & laying of 1.1 KV grade 19 core 2.5 sq.mm. PVC copper conductor armoured control cable partly recessed and partly by shaddle on wall to interconnect DG set with AMF panel

Supply & laying of 1.1KV GR. single core PVC/XLPE Ar/Copper cable from DG alternator to AMF panel through reinforced pipe incl. S&F of reinforced pipe in UG trench or concrete floor as per direction of EIC. (Make :- Havells/ Gloster/ Polycab/ RR Kable )

4 x 3 run x 240 sq. mm. single core cable for 750 KVA DG Set (R, Y, B & N).

4 x 4 run x 240 sq. mm. single core cable for 1010 KVA DG Set (R, Y, B & N).

4 x 3 run x 500 sq. mm. single core cable.

Supply & laying single core flexible copper wire in suitable size flexible steel reinforced PVC conduit on wall / floor / Tray from neutral earth bus to DG set neutral point including both side socketing. as per direction of EIC. (Make :- Havells/ Polycab/ RR Kable )

2 x 185sq. mm. for 750 KVA DG.

2 x 240 sq. mm. for 1010 KVA DG.

S&F compression type metal gland for 100 mm dia flexible pipe.

S & F compression type brass cable gland & finishing the cable end for 19 core 2.5 sq. mm. PVC/A copper cable.

Finishing the ends of single core . Ar / copper cable & S&F of copper socket , colour maching tape etc.

S & F of EI danger board. (size : 20 cm. x 30 cm.)

Supply, transporation & pouring of HSD Oil.

Supply, transporation & pouring of Mobil Oil.

SITC of floor mounted Indoor type single panel MV 65kA, 1600A, ACB in suitable enclosure having short circuit withstand capacity of 31 MVA for one second, fabricated by CPRI approved panel builder for Sub Station II & III as per G.T.P in annexure 1 [ In separate sheet]

SITC of floor mounted Indoor type single panel MV 65kA, 1250A, ACB in suitable enclosure having short circuit withstand capacity of 31 MVA for one second, fabricated by CPRI approved panel builder for Sub Station IV as per G.T.P in annexure 1 [ In separate sheet]

SITC of floor mounted Indoor type expandable cubical MV switchboard having short circuit withstand capacity of 31 MVA for one second, fabricated by CPRI approved panel builder for Sub Station II as per G.T.P in annexure 1 [ In separate sheet]

SITC of floor mounted Indoor type expandable cubical MV switchboard having short circuit withstand capacity of 31 MVA for one second, fabricated by CPRI approved panel builder for Sub Station III as per G.T.P in annexure 1 [ In separate sheet]

SITC of floor mounted Indoor type expandable cubical MV switchboard having short circuit withstand capacity of 31 MVA for one second, fabricated by CPRI approved panel builder for Sub Station IV as Sub Panel as per G.T.P in annexure 1 [ In separate sheet]

SITC of floor mounted Indoor type expandable cubical MV switchboard having short circuit withstand capacity of 31 MVA for one second, fabricated by CPRI approved panel builder for Ronald Ross building as per G.T.P in annexure 1 [ In separate sheet]

Supply of sandwich busbar trunking with Copper conductors, Class-F PET insulation, epoxy painted 2.5mm AL housing,Uniblock joints between sections, System-415v, 3Phases, 4Wire with 100% Neutral without internal earth, Degree of Protection - IP55, Rating: 1600A, 65KA.comprises of the followings: [ From secondary terminal of 1000 KVA dry type transformer to 1600A LT ACB at SS II/III]

Straight Run Feeder IP55

Flange End with Equilizer/Shorting plate (fabrication cost only)

Horizontal Bend /Vertical (fabrication cost only)

Horizontal Fixing Clips (Consider 2 Nos per Horizontal Channel supports)

Tinned Copper Braided Flexibles-350mm (with Hardware-Nuts and Bolts)

Adaptor box at transformer end -with 2mm sheet

Adaptor box at panel end -40x40x6 Channel box with 2mm sheet

Cu earthing strip-50x6 (with Hardware-nuts and Bolts)

Horizontal C channel supports with Threaded Rod (1.5m Length, Dia 16 mm) with anchor Fastener

Shaft Cantiliver angel support with C Channel for Vertical spring or Rigid hangers

Installation, testing & commissining of the Bus bar trunking system.

S & Installation outdoor type both sided door feeder piller box on bricks foundation with cement plastering and net cement finish on a height of 18” from Gr. Level. The piller box will be fabricated from 3 mm thick sheet steel for body portion and 5mm thick for top portion (roof) . The size of the piller box will be 2000(H) x 1800(W) x 1200(D) mm with inner enclosure [size 1900(H) x 1700(W) x 1150(D) mm] or as appropriate size and base channel (size:- 75mm x 40mm x 6mm ) & making interconnection by suitable size copper flat / wire. Double Locking arrangement will be made with lock and duplicate keys (7 lever godrej, navatal lock) with door handle. Two numbers lighting arrangement with control switch to be made inside the box as working light and 1 no. 250V., 5/15 combined plug socket & switch. Painting will be made by synthetic enamelled paint after 2 coats of red led primer. Bricks foundation will be cement, plastering and neat cement finish. The feeder piller box comprising the followings:-(To be installed back side of CTVS Bldg for DG power distribution )

(A) INCOMER

415V (Uimp=12KV- peak), Icu@415V=Ics=Icw for 1 sec = 65kA, 1250A, 4P Electrical draw out type Communicable, Air Circuit breaker, with microprocessor based LSIGN release having numerically adjustable overload with time delay, short circuit with time delay, Instantaneous current, Earth fault with time delay, neutral protection - (min. 50%, 100%), 12kV Impulse withstand capacity, temperature rise protection [on internal contacts & Terminals] in-built in release & inbuilt energy metering of class 1, ZSI, test facility, inbuilt capability of - a)measurement of current, Voltage, unbalance, Power, Energy, MD with date & time stamp, Power Factor etc., & b) Remote Control (ON, OFF, TRIP). The ACB should have U/V Release and at least spare 4NO + 4NC auxiliary contact. There should be LED indicating lamp for showing R, Y, B, On, OFF, TRIP & Spring charge indication on the panel door, conforming to IS 13947 - 2 - 1993 as amended upto date.The Release data (Voltage & current waveform at the time of trip) should be available even at Breaker Off& DC power fail condition. There should be LED indicating lamp for showing R, Y, B, On, OFF, TRIP & Spring charge indication on the panel door. There should be Electrical and mechanical interlock between incomers and bus-couplers. [Make :- Schneider MTZ/similar model of ABB/ Siemens/ Legrand/ L&T] Complete Set ------ 1 Sets

(B) BUSBAR CHAMBER

S&F 1600 Amp capacity 99.9% - 99.5% electrolytic tinned copper 4 bar bus bar [size of flat 4 x 100 mm x 10 mm] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size cu bars - 1set.

(C) OUTGOING

a) 415V (Uimp=12KV- peak), Icu@415V=Ics=Icw for 1 sec = 50kA, 800A, 4P Electrical draw out type Communicable, Air Circuit breaker, with microprocessor based LSIGN release having numerically adjustable overload with time delay, short circuit with time delay, Instantaneous current, Earth fault with time delay, adjustable neutral protection - (min. 50%, 100%), 12kV Impulse withstand capacity, temperature rise protection [on internal contacts & Terminals] in-built in release & inbuilt energy metering of class 1, ZSI, test facility, inbuilt capability of - a)measurement of current, Voltage, unbalance, Power, Energy, MD with date & time stamp, Power Factor etc., & b) Remote Control (ON, OFF, TRIP). The ACB should have U/V Release and at least spare 4NO + 4NC auxiliary contact. There should be LED indicating lamp for showing R, Y, B, On, OFF, TRIP & Spring charge indication on the panel door, conforming to IS 13947 - 2 - 1993 as amended upto date.The Release data (Voltage & current waveform at the time of trip) should be available even at Breaker Off& DC power fail condition. There should be LED indicating lamp for showing R, Y, B, On, OFF, TRIP & Spring charge indication on the panel door. There should be Electrical and mechanical interlock between incomers and bus-couplers. [Make :- Schneider NW6P/ similar model of ABB/ Siemens/ Legrand/ L&T]- 1 Sets. [For CTVS Bldg.]

b) b) 415V (Uimp=12KV- peak), Icu@415V=Ics=Icw for 1 sec = 50kA, 630A, 4P Electrical draw out type Communicable, Air Circuit breaker, with microprocessor based LSIGN release having numerically adjustable overload with time delay, short circuit with time delay, Instantaneous current, Earth fault with time delay, neutral protection - (min. 50%, 100%), 12kV Impulse withstand capacity, temperature rise protection [on internal contacts & Terminals] in-built in release & inbuilt energy metering of class 1, ZSI, test facility, inbuilt capability of - a)measurement of current, Voltage, unbalance, Power, Energy, MD with date & time stamp, Power Factor etc., & b) Remote Control (ON, OFF, TRIP). The ACB should have U/V Release and at least spare 4NO + 4NC auxiliary contact. There should be LED indicating lamp for showing R, Y, B, On, OFF, TRIP & Spring charge indication on the panel door, conforming to IS 13947 - 2 - 1993 as amended upto date. The Release data (Voltage & current waveform at the time of trip) should be available even at Breaker Off& DC power fail condition. There should be LED indicating lamp for showing R, Y, B, On, OFF, TRIP & Spring charge indication on the panel door. There should be Electrical and mechanical interlock between incomers and bus-couplers. [Make :- Schneider NW6P/ similar model of ABB/ Siemens/ Legrand/ L&T] - 1 Set. [For SDLD Bldg.]

c) d) 415V, 250A, 4 pole 36 kA (Uimp=8KV), Ics= 100% Icu MCCB with communicable microprocessor based release having Numerically adjustable O/L, S/C, E/F, Inbuilt Instantaneous protection, Adjustable neutral protection at 50%, 100% and & inbuilt energy metering, Both side spreader link, extended rotary handle etc. Complete Set ------ 1 Set. [For NER Bldg.]

Panel shall be Ethernet ready with necessary converter, 10/100/1000 Mbps Switch, DC Power supply module etc. if required, and there should be single Ethernet Output from the panel to communicate with 3rd party SCADA terminal, connected over Ethernet including inter connection, control wiring etc as required with FRLSH Cu cable. All the releases of Breakers and Communicable Meters should be connected in Daisy Chain through Communication Cable (By 3 Core Shielded Communication Cable for RS485 Port or OEM proprietary High speed Cable or Cat 6 Cable for Ethernet, as the case may be). The system communication architecture should be plug and play and should not involve extensive programming.

Accessories: 8 Channel HMI should be fixed at the door of panel. The HMI should be connected to the breakers through proprietary hi-speed link or through Ethernet (in case MCCB is not having hi-speed link or Ethernet Port in-built, necessary hardware for converting the communication port to Ethernet Port should be included in each MCCB/ACB) in such a way that Display of Voltage, Current, Power, Energy, MD (with date and time stamp), Power Factor, Nature of Fault, TRIP History etc. can be done for the respective breakers. All these activities should also be possible through remote 3rd party SCADA Terminal connected over Ethernet. [Type Test Certificates for short circuit withstand capacity along with ACBs mounted in the Switchboards is mandatory for submission at the time of drawing approval]

S & Installation outdoor type both sided door feeder piller box on bricks foundation with cement plastering and net cement finish on a height of 18” from Gr. Level. The piller box will be fabricated from 3 mm thick sheet steel for body portion and 5mm thick for top portion (roof) . The size of the piller box will be 2000(H) x 1900(W) x 900(D) mm with inner enclosure [size 1600(H) x 1850(W) x 750(D) mm] or as appropriate sizeand base channel (size:- 75mm x 40mm x 6mm ) & making interconnection by suitable size copper flat / wire. Double Locking arrangement will be made with lock and duplicate keys (7 lever godrej, navatal lock) with door handle.

Two numbers lighting arrangement with control switch to be made inside the box as working light and 1 no. 250V., 5/15 combined plug socket & switch. Painting will be made by synthetic enamelled paint after 2 coats of red led primer. Bricks foundation will be cement, plastering and neat cement finish. The feeder piller box comprising the followings:- (To be installed in fornt of blood bank. )

(A) INCOMER

a) 415V, 400A, 4 pole 36 kA (Uimp=8KV), Ics= 100% Icu MCCB with microprocessor based release having numerically adjustable O/L, S/C, E/F, Inbuilt Instantaneous protection, , Adjustable neutral protection at 50%, 100% and, Both side spreader link, extended rotary handle etc with castle key interlocking with both incomer.- 2 Sets.

(B) BUSBAR CHAMBER

S&F 600 Amp capacity 99.9% - 99.5% electrolytic tinned copper 4 bar bus bar [size of flat 4 x 40 mm x 10 mm] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size cu bars - 1set.

(C) OUTGOING

a) S&F of 415V, 125 Amp. 36 KA 4-Pole MCCB with thermal magnetic release, extended rotary handle, both side spreader terminals . [Make - L&T / Legrand / Schneider] ] - 6 Sets. [For Blood Bank VTPN - 3 Nos ( Gr. 1 No & 1st Fl. 2 Nos) Cooler M/C - 1, Spare - 2 nos Bldg.]

(D) METERING

(a) 500V., C.T. Coil (C.T. Ratio-400/5A., Class 0.5) - 6 Nos.

(e) LED indicating Lamp (R Y B) ---- 6 Nos .

(f) 6A Control MCB ---- 9 Nos .

(g) Supply & installation of communicable Multifunction meters with following sepefication : Digital multifunctional meter of sampling rate of 64 or higher per cycle. class 0.5S for measurement of A,V,F, pF, KW, KVA, KVAr, KWh, Freq, Runhrs,odd harmonics upto 15th and having real time clock and RS485 communication port. Fully compliance to IEC-62053-21/22,UL & CE with 3rd party lab test certificate. (Make :- Schneider, Cat No EM6400NG or equivalent) --- 2 Nos.

Supplying & Delivery of one number 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) conforming to IS: 7098 / 1988 with its latest amendment of following size. [ Make: Gloster /Havells/ Polycab/ RR Kable]

4 Core 300 Sq. mm

4 Core 240 Sq. mm

4 Core 185 Sq. mm

Laying of 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) of following size in the existing Masonary trench as required and as per GS.

5 nos 4 Core 300 mm²

4 nos 4 Core 300 mm²

2 nos 4 Core 300 mm²

2 nos 4 Core 240 mm²

2 nos 4 Core 185 mm²

1 no. 4 Core 185 mm²

Laying of 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) of following size on existing cable tray as to GS.

2 nos 4 Core 300 mm²

2 nos 4 Core 240 mm²

1 no. 4 Core 240 mm²

2 nos. 4 Core 185 mm²

1 no.. 4 Core 185 mm²

Laying of 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) of following size in UG trench as to GS.

5 nos 4 Core 300 mm²

4 nos 4 Core 300 mm²

2 nos 4 Core 240 mm²

2 nos 4 Core 185 mm²

Laying of 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) of following size through special type angle Support, making hole etc. as necy.incl S&F of clamp if required, mending good damages and painting.

2 nos 4 Core 240 mm²

2 no 4 Core 185 mm²

S & Laying 1.1KV gr. 4 Core 70 mm² XLPE Ar./Al. Cable (Make:- Gloster / Havells /RR Kakel/ Polycab as approved by EIC) with 2 Nos 8 SWG G.I wire on wall with S/F MS shaddle incl. making connections as per direction of EIC.( For VTPN at RR Ross Building).

S&F compression type gland complete with Brass Gland, Rubber Rings for dust & moistureproof entry of cables incl. finishing the ends by crimping method incl. S & Fixing Dowells solderless socket, tapes and jointing materials as follows;-

4 Core 300 mm² Al cable

4 Core 240 mm² Al cable

4 Core185 mm² Al cable

4 Core 70 mm² Al cable

Straight through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)

3.5 / 4 Core 400 mm² Al cable

3.5 / 4 Core 300 mm² Al cable

3.5 / 4 Core 240 mm² Al cable

3.5 / 4 Core 185 mm² Al cable

Supplying & delivery of 1.1 Kv Gr. 4 x 150 Sqmm unarmoured single core copper cable (Red, Yellow, Blue & Black) for temporary connection on emergency situation . (Make:- Finolex/ RR Kabel/ Havells).

Supplying & fixing 80mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Supplying & fixing 80 mm dia Heavy gauge PVC Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

S&F special type angle Support for holding the cable by horizontally run. The above clamp made of 50 x 50 x 6 mm. angle iron with half round type MS clamp for rigidly holding the cable. The above clamp made of 40 x 3mm. thick flat iron patty incl. nuts, bolts & washers etc. The length of angle support as required for 4 Core 400/300/240/185/150 mm² XLPE, Ar./Al. cable. The total iron strucutre will be hot-dip Galvanized .The structure will be fixied on wall by proper grouting inside the wall and mending good the damages as per direction of the EIC.[For 4 nos Cable run].

Supply & Installation of Electro Zinc Galvanised Hot Dip Galvanised (105 / 400 mm outdoor type) Wiremesh cable Tray in accordance with standard BSEN 12329-2000 with all mounting accessories. Fire test certification should be published in accordance with the E30/E90 standard. Electrical continuity across a coupling should be demonstrated by means of a published test method and result.[MAKE: LEGRAND CABLOFIL /OBO )]

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts (For LT Panel for SS II, III & IV)

Earthing with 50 mm dia GI pipe (TATA-M ) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level incl Excavation of soil for installatio of earth electrode and filling & ramming (For Pillar Box - 1, 2,3)

Extra for treatment of soil by using salt & charcoal of coke for pipe electrode neutral earth.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

S/F Double Door Type 8 Way Vertical TPN PDB in S.S. enclosure with IP-42/43 protection consisting with 1 no160 A., 4-Pole MCCB (36KA) as incomer, 8 nos. 63A. TP MCB as outgoing. and both side cable end box complete with all connection with suitable size of Cu. wire with proper socketing on wall by suitable size of angle iron frame incl all accessories as per direction of E.I.C.(Make:-Legrand /ABB ITUS)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire ((Finolex/Havells/RR)) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish [Av. Run 9 Mtrs.] [DG Panel Room & Sub Station].

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board [For Panel Room & Sub Station].

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board complete with 3 nos suitable size copper bar with holes (for Ph,N & E) fixied on bakelite/Hard rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [For Panel Room & Sub Station]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [For Panel Room & Sub Station].

S&Drawing following sizes PVC insulated FRLS Cu wire in suitable sizes of polythene/PVC rigid conduit pipe recessed in/on wall as follows incl. making connections as per direction of EIC as to G.S.:-

2x2.5 & 1x1.5 mm² copper wire .e (for power plug)

3 x 1.5 mm² copper wire .

Finishing the end of following sizes copper wire end / PVC cable/Al. with dowells solderless socket by crimping method as per GS as follows :-

2 X2.5 &1X1.5 mm² copper wire

3X1.5 mm² copper wire

S&F of 240V., 1420 RPM, 300mm (12") Dia A.C. Exhaust Fan (EPC - Heavy Duty) incl. Cutting hole on wall, S&F Louver Shutter with Nuts, Bolts, washers etc. & mending good the damages to original finish. (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty)

S&F of 240 V, 375 mm. (15") Dia of A.C. Exhaust Fan (EPC Electrical Pvt. Ltd. - Heavy Duty) incl. cutting hole on wall, S&FGI sheet (20 SWG) metal cowl with MS flat iron frame and GI wire mesh on wall with necy. bolts, nuts, (6mm diax62mm long), washers etc. as per direction of the EIC.

S&F of 18" (450mm) 4 (four) Blades Industrial type full metal body wall Bracket Fan complete with all accessories with S&F sequential timer (Approved Make) to be grouted on wall inclu. Making necesy. Connection as per direction of the EIC for lift m/c room. (Make - E.P.C.Electrical Pvt. Ltd., Heavy Duty).

S&F of 230 V, 18" (450mm) 4 (four) Blades Industrial type Air-Circulator Pedestal Fan complete with all accessories such as Regulator, Cord and 15 Amp. 3-pin Top (Make - E.P.C.Electrical Pvt. Ltd., Heavy Duty).

S&F of 240 V., 900 mm. Sweep, A.C. Ceiling Fan without Regulator & Down Rod incl. Canopy, Fan Blades etc. and engraving & Painting the Departmental Number (up to 14 digit) on Fan Body with black japan paint and interconnection complete in all respect. [Make: Crompton HS+, / Orient Energy Star]

Dismantling of LT panel of Sub Station No II with bus bar chamber & Main switches after disconnecting the all incoming & outgoing cables carefully and making temporary connection by providing temporary LT Panel comprising with bus bar of capacity 800 Amp, 630 Amp incoming switch and 4 nos. 63A., 3 nos. 125A. and 3 nos. 160A. outgoing switches on MS frame and socketing the termination of all the cables and supply and drawing of different sizes of cable as required incl straight through cable jointing (as required) to feed power to all the utility services up to 3 days and dismantling the same after completion the Job.

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability period 1 (One) Year

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)

SIMPSON AND FERRIS PVT LTD

CHAKRABORTY ENTERPRISE