REPAIR / REPLACEMENT OF UG CABLE, LT PANEL / FEEDER PILLAR BOXES AND REPAIR MAINT OF DG SETS, STREET LIGHT, PERIMETER LIGHTS WITH CONNECTED ITEMS AT KALINA AND JUHU UNDER GE NORTH MUMBAI

Amount

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, cable trenches etc, not exceeding 10 sq m on plan and getting out hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Supply and lay double wall corrugated (DWC) HDPE pipe 63mm bore, as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N or equivalent as approved by GE

Supply and lay double wall corrugated (DWC) HDPE pipe 90mm bore, as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N or equivalent as approved by GE

Supply and Lay LTUG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, laid in trenches or passing through pipe, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC pipe for cable protection shall be measured and paid separately in their respective items

10 Sqmm x 2 core

16 Sqmm x 4 core

25 Sqmm x 4 core

35 Sqmm x 3.5 core

50 Sqmm x 3.5 core

70 Sqmm x 3.5 core

95 Sqmm x 3.5 core

150 Sqmm x 3.5 core

Taking down / out unserviceable GI pipes of any descriptions

Supply and fix galvanised iron pipe, light grade, 50mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supply and fix galvanised iron pipe, light grade, 80mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supply and fix MCCB 4 pole, 100 Amps, 415 Volts, 50 Hz, 16 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Benlo

Supply and fix MCCB 4 pole, 160 Amps, 415 Volts, 50 Hz, 25 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Benlo

Supply and fix MCCB 3 pole, 200 Amps, 415 Volts, 50 Hz, 36 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Benlo

Supply and fix MCCB 3 pole, 250 Amps, 415 Volts, 50 Hz, 36 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Benlo

Supply and fix MCCB 4 pole, 400 Amps, 415 Volts, 50 Hz, 36 KA breaking capacity, thermal & magnetic adjustable type with extended copper terminals including all connections and testing including taking down of old unserviceable MCCB complete all as specified and as directed by Engineer-in-charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Benlo

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth strip 32 x 6mm, 7.5 m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate and protected by 40 mm bore light grade galvanised iron pipe complete all as shown in electrical plate No.3 of MES schedule Part I, 2009 with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor, Nominal Cross-Sectional area exc. 50 to 95 Sqmm3.5 Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens/ Birla 3M/ Mahindra & Mahindra

All as per item No 14 described here-in-before but of Nominal Cross-Sectional area exc. 120 Sqmm but not exc. 185 Sqmm, 3½ Core and Testing complete all as specified and as directed.

All as per item No 14 described here-in-before but of Nominal Cross-Sectional area exc. 150 Sqmm but not exc. 240 Sqmm, 3½ Core and Testing complete all as specified and as directed.

Material and labour for finding cable fault with electronic fault detector in LT UG cable of size 25 to 300Sqmm complete including earthwork and jointing cable complete all as specified and as directed

Replacement of trivector meter in existing panel /feeder 3 phase 4 wire CT operated with necessary CT copper wound out of rating 200/5 Amps for 3 phases, 15VA, class -I accuracy suitable for recording KWH , PF etc including necessary wiring for connections complete all as directed Make : L&T Cat No WR300bc73000

Replacement of multifunctional meter in existing panel/feeder 3 phase CT operated with necessary CT copper wound out of rating 300/5 Amps for 3 phases, class -I accuracy suitable for recording KWH, KVA, KW, kVAh, PF etc, flush mounted 96x96mm, input voltage measurement range 50 -520 VAC including necessary wiring for connections complete all as directed Make : L&T Cat No WL4405110000 / / Havells / Legrand

Supply and fix CT ratio 300/5 amps in existing panel/feeder complete all as directed Make : L&T / Havells / Legrand

Supplying, installing, testing and commissioning, in replacement, of 1.50m x 1.20m x 0.60m factory made out door type, dust and vermin proof, LT feeder pillar box, double door, cubical and compartmentalized type, 415 volts, AC, 50 Hz, fabricated with 3 mm thick CRCA sheet for outer side and 2 mm thick inside complete with and including mounted on angle iron frame stand of size 40 x 40 x 6 mm thick, 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, powder coated of approved colour by Engineer-in-Charge, enclosed bus bar chamber with aluminium bus bar of size 40x10mm for phases and neutral (04 Nos of rating capacity 400 Amps), mounted on PVC insulators, electric connection complete with from MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement including PCC work, excavation & earth work complete comprising M & L for following complete all as specified and as directed by Engineer-in-Charge:-

Supply and fix GI strip 32X6 mm buried in ground, extension of existing earthing lead all as per specified and directed by Engineer - in - charge.

Material and labour for cutting or cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C1 using 20mm graded aggregate complete all as specified and directed.

Cutting of grasses, manually/grass cutter, earth heaps, etc., cleaning and levelling surroundings of substation including removal of spoil, wastage materials, etc to a distance not exceeding 50.00 mtr, complete all as specified and as directed.

Repair/maint of Capacitor bank APFC panel of 66 to 100 KVAr, disconnecting and taking out U/S LV capacitors, Protection brunch, Cooling fan, connectors, Power contactors, Controller etc from housing and including fixing new above items, all connection and testing to maint PF above 0.95 complete. Note: Capacitors and other items shall be measured and paid separately in respective items.

Supply only heavy duty Power capacitors bank 25 KVAr cylindrical type suitable for 440 Volt AC,3 phase ,50 Hz confirming to IS:13340-1993 all as specified and as directed. Make: L&T / Havells / Schneider / ABB / Legrand / Siemens / Epcos

All as per item No 26 described here-in-before but of capacity 15 KVAr

All as per item No 26 described here-in-before but of capacity 10 KVAr

All as per item No 26 described here-in-before but of capacity 5 KVAr

Supply only capacitor contactor 3 phase, 415V,suitable for 7.5/5 KVAR rating capacitor. Make :L&T, model: MpX8 or equivalent.

All as per item No 27 described here-in-before but of suitable for 10/15 KVAr capacitor. Make:L& model: MpX15 or equivalent to Legrand / Havells

Supply only power contactor 3 pole, 415V, 22 Amps Make :L&T, model: MNX22 or equivalent to Legrand / Havells

Supply only power contactor 3 phase, 415V, 40 Amps, Make :L&T model: MNX 40 or equivalent to Legrand / Havells

Supply only automatic power factor correction relay 8 stage 3 phase, 415V, 50 Hz, Make : L&T or equivalent to Legrand / Havells

Supply only indicator lamp LED type, 220V with holder

Supply only Current Transformer having Ratio 100/5, 15 VA

Material and labour for welding hinges, repairing the complete front and rear covers (door) of the old LT panel board, including replacing the required new bolt, nuts, locking arrangements and refixing the covers and painting with same colour paint matching properly with two coats of synthetic enamel paint and without disturbing the existing electric system complete all as specified and as directed by Engineer-in-Charge.

Material and labour for painting the old Main LT panel board including scraping and removing the old painted surfaces and painting /matching the same colour paint including two coats of super enamelled paint and without disturbing the existing electric system all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of street light bracket arm fabricated out of 40 mm dia GI tubing light grade 1.2 mtr long bend to shape fixed on pole with including 2 pair of clamps of fitted with suitable size nuts, bolts washers incl one coat of paint as specified and directed by Engineer-in-Charge.

Supply and fix in repairs cable junction box made out of thermoplastic sheet, IP66 protected outdoor installation of size 200 x 160 x 98mm with 4 way bakelite cable terminals including 03 Nos polyimide gland with check nut (M-32- 2 Nos) fixed on poles with flat iron clamps of size 25x3mm, nut, bolt, washers etc including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and provision of one single pole MCB 6 amps for controlling light etc complete all as specified and as directed by Engineer-in-Charge. Make : Sintex GS-JB-2014 / K-8250 of Hensel or equivalent in National

Supply and fix repairs 3 core PVC insulated and unsheathed unarmoured 1100 Volt grade cable 2.5 sqmm with stranded copper conductor cable drawn through the pole & GI bracket with drilling hole at Top & Bottom and including PVC conduit of size 20mm as directed by Engineer in charge including accessories and fixed on walls and connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Note :-Two runs of 2.5 sqmm cable, one run of PVC conduit will be measured and paid as one unit length. Make: Finolex / Plaza / Anchor / Havells / Polycab

Supply and lay in repair GI pipe light grade 40 mm bore for cable protection laid in trenches complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Analog timer switch, single phase, 240 Volt complete all as specified and as directed by Engineer-in-Charge. Make: L&T , Cat part No:J6107B204 or equivalent of make specified.

Supply and fix in repairs ML3 , three pole, power contactor 40 Amps rating, coil voltage 240V, 50HZ complete all as specified and as directed by Engineer-in-Charge. Make: L &T Cat part no.SS90721 or equivalent of make specified.

Supply and fix LED street light fittings minimum 70 watt rating separate individual peanut plated Lens and aluminium reflectors housing should be made of LM6 Pressure dia cast aluminium. Optical Cover should be only , Toughened Glass only Impact resistance > IK05 IP Protection not less Than IP -65, Protection should be class I Vibration should be as per IEC-60598, Product standard IS 10322/IEC 60598, all the component such as driver , surge protector should be of same make. Driver should be moulded type with operating voltage should be 140 V- 270 V, Driver frequency 50Hz Power factor>0.9, Lumen output should not be less than 130 Lumen/watt and Luminaire Driver kit should be moulded type weather proof construction, with separate surge protection device 5ka rating and separate connector block for termination of incoming cable connection all as specified and directed by Engineer -in- Charge. Make: Phillips Cat part No BRP410LED CW072 MRFG S1 PSU GR or equivalent Bajab SKY line LED Cat Part No-ENXPTP70LWWCRPCSD and Wipro Cat Part No-LR02-781-XXX-57

Supply and fix in repair for poted type LED driver silicon filled complete weather proof for 70 watt LED street light . complete all as specified and directed by Engineer-in-Charge. Make : Philips/Crompton/Wipro

All as per item No 43 described here-in-before but for open execution inside the LED fitting for 45/60 watt LED fitting complete all as specified and directed by Engineer-in-Charge. Make : Philips/Crompton/Wipro

Supply and fix LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engineer-in-Charge. Make: Make Phillips /Wipro//General Electric (GE)/ Bajaj

Supply and fix 15 W new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power leds as light source complete all as specified and directed . Make: Havells Cat Part No RUBYMINIPT15WLED757PSYMTOPC or equivalent WIPRO/BAJAJ/PHILIPS

Material and labour for spot welding for making holes on bottom and top of pole (2 places) for insertion of 3 copper connection wire of street lights in existing steel tubular poles all as directed by Engineer-in- Charge.

Supply and erect 8.5 meters long steel tubular swaged poles type 410 SP -22 complete with CI base plate and finial taper , plug bolts , nuts and screw and including complete in replacement of rail pole all as specified and directed. Note: Earth work excavation, PCC for foundation and coping will be measured and paid separately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune

Material and labour for complete removal of existing paint of steel tubular/rail poles length up to 9 mtr including preparation of outer surface and applying two coats of aluminium paint over a coat of red oxide and two strip of yellow and black colour paint of size 30 cm width from bottom of pole height 30 cm, including numbering to pole with base paint of yellow colour and Black for numbering should not be less than 100 mm in height and 10 mm in width complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Bus bar chamber 63 Amp 3 phase four pole 415 volts all as specified. Make: BENTEC Cat part no. BEBB063 or equivalent in C&S / Havells / Indoasia.

Supply and fix in repair Bus bar chamber 100 Amp 3 phase four pole 415 volts all as specified and as directed. Make .BENTEC Cat part no. BEBB0100 or equivalent in C&S / Havells / Indoasian.

Material and labour for Plain Cement Concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping of poles including necessary formwork etc complete all as specified and as directed by the Engineer-in-charge

Labour only for servicing of 100 KVA DG Set with draining out of engine oil/lubricant coolant, taking out and fixing only of unserviceable Oil Filter element, Fuel filter element, fuel flexible pipe, V belt for water pump and alternator, air filter element, cleaning of Fuel tank etc complete all as specified and as directed. Make : Kirloskar. (Location : WT Stn Juhu) Note : (i) Suppy only spares and lubricant to be measured and paid separately under respective items here-in-after.

(a) Supply Fuel Filter element

(b) Supply only Lub Oil Filter element

(c) Supply only Air Filter Element (Inner & Outer)

(d) Supply only 'V' Belt

(e) Supply only Hose pipe

Labour only for servicing of 15 KVA DG Set with draining out of engine oil/lubricant coolant, taking out and fixing only of unserviceable Oil Filter element, Fuel filter element, fuel flexible pipe, V belt for water pump and alternator, air filter element, cleaning of Fuel tank etc. Complete all as directed. Make : CG. (Loc. : MAP Pump House at Kalina) Note : (i) Supply only spares and lubricant to be measured and paid separately under respective items here-in-after.

(a) Supply only Air Filter Element

(b) Supply only L.O. filter cartridge

(c) Supply only Hose Radiator

(d) Supply only 'V' Belt

(e) Supply only Fuel Filter Element

Labour only for servicing of 40 KVA DG Set with draining out of engine oil/lubricant coolant, taking out and fixing only of unserviceable Oil Filter element, Fuel filter element, fuel flexible pipe, V belt for water pump and alternator, air filter element, cleaning of Fuel tank etc. Complete all as directed. Make : Kirloskar. (Loc. : Fire fighting Sub Stn at Kalina) Note : (i) Supply only spares and lubricant to be measured and paid separately under respective items here-in-after.

(a) Supply only Air Filter Element,

(b) Supply only L.O. filter cartridge

(c) Supply only Hose Radiator

(d) Supply only 'V' Belt

(e) Supply only Fuel Filter Element

Supply and filling of Engine oil 15W40 to top-up/ refilling of all DG set of various capacity, model & location as mentioned here-in-before as per the standard practice complete all as specified and as directed by Engineer-in-Charge. Make: SERVO / Castrol / HP / Valvoline.

Supply and filling of Coolant suitable for DG set complete all as specified and as directed by Engineer-in-Charge. Make : CASTROL / SERVO / PUROKOOL / K-Kool

Supply and fix maintenance free lead acid battery, 12 Volt, 80 AH, of size XP 1800, complete all as specified and as directed by Engineer-in-Charge. Make : Exide or Amaron.

Supply and fix in repairs fully automatic star delta starter suitable for 40 HP motor in sheet steel enclosure with Single Phase Protection feature complete all as specified and as directed by Engineer-in-charge (For fire fighting pump). Make: Make: Havells / Legrand / L&T / Siemens / C & S / ABB

Supply and fix Hose pipe of size 63 mm bore 15 m long with both end 63 mm dia connector with Gun metal fire hydrant nozzle of size one end 63 mm and other end 15 mm bore all as per specified and as directed by Engineer-in-Charge.

Supply and fix fire hydrant GM landing valve type 'A' (Single head out let) of size 63 mm dia, confirming to IS-5290 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Foot Valve 100mm dia conforming to IS 4038, PN 0.2 including necessary fixing arrangements including taking down complete all as specified and as directed by Engineer-in-Charge (for fire fighting sump). Make: Sant BIR / Leader / Venus / Kartar

EVEREST POWER CONTROL ENGINEERS