COMPREHENSIVE REPAIRS TO JOINERY PLASTERING FLOORING INTERNAL WATER SUPPLY SANITARY ITEMS PLUMBING SUNKEN TREATMENT LEAKAGE AND SEEPAGE TO MD ACCN AT ZONE D UNDER AGE B R II UNDER GE N AT MIL STN BIKANER

Amount

Demolition of cement conc. In any description and inc any position not otherwise specially provided complete all as specified and as directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed by Engineer-in-Charge.

Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) size n.exc 1.5 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down old rusted and damaged steel window /vents incl.guard bar and grill where exists of size not exc.1.5 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) size exc 1.5 sqm and n.exc 4 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description n exc 1 Sqm each pane complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit complete all as specified and as directed by Engineer-in-Charge.

All as per item N 10 but 20 mm dia complete all as specified and as directed by Engineer-in-Charge.

All as per item N 10 but 25 mm dia complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames complete all as specified and as directed by Engineer-in-Charge.

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns complete all as specified and as directed by Engineer-in-Charge.

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns complete all as specified and as directed by Engineer-in-Charge.

S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats complete all as specified and as directed by Engineer-in-Charge.

S& F in repair 30 mm thick Flush shutters for door solid core construction, with block board core, and ply wood face panels with lipping to match complete all as specified and as directed by Engineer-in-Charge.

S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening complete all as specified and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

S&F rubber gasket of 2.5 mm thickness (minimum) and width 60 mm, fixed with steel screws and black nails with plate washers to wooden door to cover the gap between door and floor complete all as specified and as directed by Engineer-in-Charge.

S&F factory fabricated pressed steel frame/box windows, ventilators with glazed and fly proof shutters provided to size and dimension as specified & shown on drawing No BTD-888R Sheet No 1/5 to 5/5 & BTD-889 Sheet No 1/4 to 4/4 Or as directed by GE with & including MS grills, MS fillets, pintol hinges, tower bolts, MS handles, peg stays, MS lugs, locking arrangement, dash through bolt where required, complete all as specified and as directed by Engineer-in-Charge. Notes: -(i) PCC for filling in frames, glass,wire gauge and painting shall be measured & paid in separately under respective items. Provision of all other items as shown & specified on drawings shall deemed to be include in provision of cutting holes of suitable depth in walls for inserting lugs etc and making good dismantled portion in PCC 1:2:4 type B-0 using 12.5 mm graded stone crushed stone aggregate and CM (1:3)

S&F Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed by Engineer-in-Charge.

S& F Extruded aluminium alloy handles, 100 mm long, fabricated type anodised complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

S & F Extruded aluminium alloy handles, 150 mm long, fabricated type anodised complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium, anodised , 150 mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm long, Butt hinges, stainless steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm size mild steel, stove enamelled black, pressed handles, oval type, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium alloy, anodised, slidding door bolt 300mm long, with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Teak wood beading 20x60mm half round complete supplied and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Prelaminated partical board 18/19mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F Hasp and staple 100mm aluminium anodised, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel work as in hold fasts, clamps, bands, straps etc conforming to Fe 410-0 complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel plate rack, tubular type, with fixing arrangement 900mm x 600 mm size complete all as specified and as directed by Engineer-in-Charge.

S&F curtain rods, 20mm dia mild steel, chromium plated including brackets, stops etc and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S & F in repair glass corner of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

M&L Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4 complete all as specified and as directed by Engineer-in-Charge.

M and L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

All as per item No 50 above but on vertical surface over 10 mm thick rendering in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M and L for 20mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified and as directed by enineer bin charge.

M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection laid in panels complete complete all as specifed and as directed by engineer in Charge.

S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75mm Aluminium mortice lock vertical type 4 lever complete all as specified and as directed by Engr-in-charge.

S&F in repair door closer of cast iron body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701mm to 850mm wide and of weight between 36 to 60 kg, ISI marked complete all as specified and as directed by Engr-in-charge.

S&F in repair 150 mm Floor door stoper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore brass spindle of best quality suitable for bib tap and stop cock to make the bib tap and stop cock fully functional complete all as specified and as directed by Engineer- in - Charge.

Attending the complaints of AGE B/R like fixing screws to tower bolt/Aldrop bolt/ stoppers,Handle/ Hings in respect of Easening of ( Steel/wooden/Aluminum) door/Windows of any description and size , by cleaning ,adjusting in position and making the same functional incl small repairs if reqd. with and incl greasing , oiling complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Spray jet, brass chromium plated, with and including 1.5 metre long PVC flexible reinforced pipe for EWC, for bore dia of pipe 15mm,complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)

M& L GI Tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-Charge.

M& L GI Tubing , medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.

Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-Charge.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed by Engineer-in-Charge.

Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 500 lit complete all as specified and as directed by Engineer-in-Charge.

M&L Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.)

S&F in repair (Syphon internal fitting ) of PVC low level cistern as per existing pattern to make the PVC low level cistern fully functional complete all as specified and as directed by Engineer- in - Charge.

S & F in repair Ball valves 15 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm dia (minimum weight 142 Gms) and fixed complete all as specified and as directed by Engineer-in-Charge.

Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm complete all as specified and as directed by Engineer-in-Charge. Make : Prayag or equivalent.

S & F in repairs Ball valves 25 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm dia (minimum weight 455 Gms) and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Brass chromium plated WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)

S&F in repair brass CP wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specified and as directed by Engineer-in-Charge. (Make : PRAYAG or equivalent).

S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous china wash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repairPVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel tubular towel rail, 20 mm dia D type 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

S&F In repair bib tap 15 mm bore, high pressure of PTMT (Minimum weight 90 Gms) colour approver by Engiineer in Charge , screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Bib taps brass cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore GI pipe,complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Bib tap 15 mm dia, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Stop valve, 15 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Stop valve, 20 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Stop valve, 25 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L in repairPillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L in repair Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed as directed by Engineer in charge .

S&F in repair PVC Toilet cabinet with shelves and shutters fixed with looking mirror of size 600 x 450 mm as directed by Engineer in charge .

S& F in repair Plastic water closet seat, any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as directed by Engineer in charge.

S&F in repair CP Health Faucet fixed type suitable for EWCs with 1,5 mtr stainless steel tube complete all as specified and directed by Engineer-in-charge.

S&F in repair CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge.

S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe fixed as directed by Engineer in charge..

S&F in repair grating 75mm dia of stainless steel with and without hole having minimum weight 75 gm complete all as specified and directed by Engineer-in-Charge.

S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F 40 mm sink waste coupling for WHB sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F waste pipe 32 mm for WHB with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F 40 mm kitchen sink waste coupling for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F pvc waste pipe 40 mm for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm bore brass spindle of best quality suitable for bib tap and stop cock to make the bib tap and stop cock fully functional complete all as specified and as directed by Engineer- in - Charge.

M&L in repair Chromium plated soap dish complete all as specified and directed by Engineer-in-charge.

M&L for Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.

M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.

M&L for Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer as directed by engineer in charge.

preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide as directed by engineer in charge.

Preparing old decorated surfaces of wall and applying two coat of white wash as directed by engineer in charge.

All as per item No 112 above but on ceiling as directed by engineer in charge.

Preparing of old decorated surfaces of wall and applying two coat of distemper oil emuision as directed by engineer in charge.

Preparing of old decorated surfaces of wall and applying one coat of distemper oil emuision as directed by engineer in charge.

Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling as directed by engineer in charge.

Preparing newly plastered surfaces of wall and applying two coats of colour wash as directed by engineer in charge.

Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed by Engineer-in-Charge.

M&L preperation of new decorative concrete, plastered/ un-plastered surface and applying two coat of cement based paint of any tint complete all as specified and as directed by Engineer-in-Charge.

Dismantling strucural steel work including door gates but excluding framed truss complete all as specified and as directed by Engineer-in-Charge.

MS framed work as steel gates, chowkhats and other similar work of angle or other section with gusset plates rails, braces etc complete driling for fixing of steel sheeting or other covering etc, confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed by Engineer-in-Charge.

Providing and fixing in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete all as specified and as directed by Engineer-in-Charge.

S&F 5.5 mm in repair thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete all as specified and as directed by Engineer-in-Charge.

Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge..

M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only) complete all as specified and as directed by Engineer-in-Charge.

S&F Preparing surface and cleaning of concrete slab by wire brushing and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge

M&L 150 micron polyethylene sheet supplied and fixed complete all as specified and as directed by Engineer-in-Charge

M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used. complete all as specified and as directed by Engineer-in-Charge.

M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

Ditto all as per Srl item No 133 but except tiles

M& L for cement mortar for raking out joints/ pointing to brick tiles laid flat in roofs and flush pointing tiles 30 cm by 15 cm tiles laid flat in 1:3 cement mortar as specified by engineer in charge

S&F in repair towel ring with material brass with glossy finish with fitting all as specified and as directed by engineer in charge.

S&F in repair glass shelf 500 mmx60 mm with ABC brackets (450x125x6 mm) all as specified and as directedby Engr-in- charge

Dismantling of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar as directed and specified by engineer in charge.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed by Engineer-in-Charge.

S&F Cup board knob mild steel 40mm dia complete all as specified and directed by Engr-In-Charge fixed in repair.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with flap of hinge ( when open 30 mm) complete all as specified and as directed by Engineer-in-Charge.

M&L running welding in repairs with thickness of metal not exc 6 mm including provision for stopper of peg stay steel handle fitting complete all as specified and directed by Engineer-in-Charge.

M&L welding in repairs not exc 2.5 cm in length and not exc 6 mm thick of metal complete all as specified and directed by Engineer-in-Charge.

M&L 18-20 mm thick single piece machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L 18-20 mm thick single piece machine cut kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge.

S&F Plastic seat cover lid only for PVC water storage tank of capacity 500 Ltrs (sample as approved by EIC) complete with locking arrangement & hinges complete all as specified and as directed by Engr-in-charge.

S&F in repair of rubber buffer of 25 mm bore as specified by Engineer incharge.

Demolition of Reinforced cement concrete of any description and in any position as directed and specified by engineer -in-charge

M&L for clearing existing reinforcement bars with wire brush/rotary wire brush making the surface free from cement skin, loose particle, dirt etc and applying rust remover (Rustoff 100 of Sika/ '8832GM' pidilite or equivelent of Fosroc/ Dr Fixit) on the rebars and removing the loose rust particles after minimum 24 hours by wire brush, all as per manufacture's instructions, complete all as specified and as directed. Note: Mode of measurment shall be affected surface area of column, beam, slab complete all as specified and as directed by Engineer-in-Charge.

S&F hard drawn steel wire fabric, weight not exc 4 Kg per sqm , cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm in dia, supplied and fixed in reinforcement complete all as specified and as directed by Engineer-in-Charge.

M&L for cement based polymer modified anti corrosive rebar coating system ('Sika Top Armatec-108 " of Sika or equivalent of Dr. Fixit/ Fosroc) to existing reinforcement all as per manufacture 's instructions, complete all as specified and as directed. Note: Mode of measurment shall be affected surface area of column, beam, slab complete all as specified and as directed by Engineer-in-Charge.

M&L for one layer of 20 mm thick concrete (comprises composition 1:2:1 plaincement concrete i.e. One part of cement (43 Gde OPC), two part of fine aggregate and one part of 10 mm and down size trap stone aggregate) mixed with 'Sprayset SL' of Fosroc( Equivalent to Sika / Dr Fixit) 2 to 2.5% by weight of cement and 12.5 to 16.5 liter of water mixed as per manufacture's instuctions and guniting by pressure nozzle with a delivery capacity of 2.5 Kg per sqm over column , beam, roof , slab, complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar as specified and as directed by engineer in charge.

M&L Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar of 1:6 as specified and directed by engineer -in- charge.

M&L for Jodhpur stone slabs, self faced 10 cm thick, 25 to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 as directed and specified by engineer in charge

Demolition of existing RCC chajja of any size and description and S&F 25 mm to 30 mm sand stone slab in sunshades, chajjas, shelves, cills, landings, cover stone, templates etc n exc 2m in length , punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 incl plastering all around in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

S&F 20 mm in repairs, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 25 mm in repairs, gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

M&L Vitrified Ceramic tiles 10 mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.complete all as specified and as directed by Engineer-in-Charge.

M&L Vitrified Ceramic tiles 10 mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm, in verticle on 15mm thick screeding in CM 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

Taking down washed stone grit plaster on exterior walls of any description as specided by Engineer in charge

M&L for washed stone grit plaster on extrerior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15 mm cement plaster 1:1/2:2 (1 cement :1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing , the top layer with brushes and water to expose the stone chippings complete all as specified and directed by engineer in charge

M&L for forming groove of uniform size 15 mm wide and 15 mm deep in top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of Engineer in charge

M&L preperation of new decorative concrete and applying two coat of weather proof exterior emulsion paint over a coat of exterior wall primer incl a layer of wall care putty of any tint all as specified and directed by Engineer -in- charge.

S&F in replacement Vitreous china squatting pan of orissa pattern, white of size 580x440mm with integral foot rest and P or S trap in cluding provision of lime concrete bedding min 150mm thick (1:2:5) inc taking out old WC complete all as specified and as directed by Engineer-in-Charge.

vikas builders

durga construction company

m/s gharu constrution company