Strengthening of Railnet/FOIS/CMS/TMS/ICMS/COA at Divisional officers' offices, Sub divisional officers offices, Crew Lobbies, Supervisor offices, workshop, depots, ROH, Loco sheds etc. to improve speed of internet & expand e-governance availability to Railway Officials over Jaipur division.

Horizontal direction drilling/boring without damage of surface road /track using Auger Machine(HDD machine). The bore shall be upto 200 mm dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the 01 bank of the road. The length of the bore shall be minimum 4 Mtrs long. This include insertion of different dia DWC-HDPE pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe Supply is not covered under this item. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution.

Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003 or latest alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on North Western Railway and instructions of Railway Engineer at site. In case 1.2m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1.2m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1.2m. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution( Unit is Cubic Meter)

Supply of UTP CAT-6 cable in a roll of 305 meter and make Siemen/ Systemax / Panduit/ Tyco/ Krone/ AMP. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of Pre-lubricated HDPE duct, 40 mm OD, 33 ID as per RDSO specification No. RDSO/SPN/TC/45/2013 Rev. 2.0 or latest. The item also includes supply of all the accessories of HDPE 04 duct like end caps, collars, bends, couplers etc. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Laying of Pre-lubricated HDPE duct, 40 mm OD, 33 ID as per RDSO specification No. 05 RDSO/SPN/TC/45/2013 Rev. 2.0 or latest. The item also includes installation of all the accessories of HDPE duct like end caps, collars, bends, couplers etc. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution.

Blowing/drawing of OFC cables in the HDPE duct along with all the protective work as per instructions of engineer incharge at site. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution.

Supply of DLP trunk 32X20mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Fixing & wiring (Laying) of DLP trunk 32X20mm with required all changeable 08 internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Cable will be supplied by Railway and all other fixing material will be supplied by contractor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution.

Supply of single mode single fibre optical media converter supports wavelength 09 division multiplexing (WDM) upto 20 KM, wavelength supported 1310 & 1550 nm, 10/100/1000(Giga) RJ-45, model- DIGISOL DG-MC6123S or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of Wireless controller supports two 10/100/1000 Base- T electrical ports on 10 balances loads based and can manage upto 128 smart wireless Aps, Wireless protocols and standards: 802.11/a/b/g/n/d/h/i/e/k with RF management model make DIGISOL DG-WU2002 or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply.

Installation of Wireless controller supports two 10/100/1000 Base- T electrical ports on 11 balances loads based and can manage upto 128 smart wireless Aps, Wireless protocols and standards: 802.11/a/b/g/n/d/h/i/e/k with RF management model make DIGISOL DG-WU2002 or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution.

Supply of POE injector adaptor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of wireless access point dual band indoor managed/standalone access, built in 13 antenna, two ports(1GE + 1FE), POE support. This includes all accessories make DIGISOL model DG- WM5307IAC or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply.

Installation of wireless access point dual band indoor managed/standalone access, built in antenna, two ports(1GE + 1FE), POE support. This includes all accessories make DIGISOL model DG- WM5307IAC or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution.

Supply & Installation of 19" Rack 17U with power strip and all fitting accesssories for housing of network equipment. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution.

Supply of 8 port Gigabit Lite Managed PoE Layer 2 Switch supports 8 nos 16 10/100/1000BASE-T ports, along with 2 Gigabit SFP ports, green-saving technologies, make model DG- GS1510HPL DIGISOL / CISCO/JUNIPER or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of SC/APC -LC/PC patch cord (5 meter) (3M, TE connectivity, R&M make or superior) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of SC-APC/SC-APC patch cord (1 meter) (3M, TE connectivity, R&M make or superior) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of work station note book as per Technical Specifications . It also includes 19 supply of Laser Printer (Only branded). The workstation should be capable of reconfiguring the system in case of any alteration in yard interlocking in future. Technical Specifications should be attached with the tender document by Tendering authority. Inspection: Consignee Inspection charges: None Payment terms: 100% after supply

Supply of OTDR 32 DB model JDSU MTS8126SR or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of Fusion Splicing Machine model Fujikura FSM-60S or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.SDO/ RDSO/E&B/001 dtd.19.09.08 . It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. © Copper strip of 150x25x6 mm, to 22 terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate. (minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO Inspection Charges:Borne by Railways Payment Terms: 100% after Supply.

Installation of Unit Maintenance Free Earth as supplied under item no. 13.3 of Chapter 13 of SOR . It includes ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer 23 surface (minimum copper bonding thickness of 250 micrones to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specn.No.RDSO/SPN/ 197/2008 or latest and conforming to RDSO Drg.No.S DO/RDSO/E&B/001 or latest. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution and testing.

Supply of frame, surface box and white cover plates for Two modules. This also includes supply of RJ-11 Telephone sockets with level holder Jack type, RJ-45 LAN sockets Jack Type (Tool less) and blanking plates for one modules. Make: Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Fixing of frame, surface box and white cover plates for Two modules. This also includes 25 fixing of RJ-11 Telephone sockets with level holder Jack type, RJ-45 LAN sockets Jack Type (Tool less) and blanking plates for one modules. Make: Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution.

Supply of power cable 3 core 2.5 sq mm multi strand (36/0.3 mm dia) cable as per IS 26 694:1990 reaffirmed 1995 or latest suitable for railway electrification area shall be of reputed make like Delton, LAPP, Finolex, or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply.

Supply of SFP Optical/Electrical 1 Gbps or 100/1000 Mbps Electrical as required. Make: Cisco, Eoptical or similar suitable for Neon. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Supply of Small Form- Factor Pluggable(SFP) as per IEEE standard: IEEE 802.3z, 28 Connector type: LC type, Wavelength(nm): 1310 nm, Fibre type: Single mode, Max cable distance: upto 20 km. Make & modelDG-SA1133-20 DIGISOL/Netgear/Cisco or similar. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.