PROVISION OF WOODEN FLOORING AT SQUASH COURT AND CERTAIN B/R WORKS AT AFS AMLA

Amount

Supply and Installation of wooden sports flooring for Squash court conforming to the requirement of MFMA (Maple flooring Manufacturers Association), having PERFORMANCE STANDARD DIN 18032, PART- 2 also conforming to the standards specified by WSF (World Squash Federation), using MFMA grade marked maple wood planks finished with 21 mm thick 53 to 90 mm wide and in random length in tongue and groove shape. the edge of the board will have a finger lock groove and the bottom side air pass groove and treated with special anti-termite treatment and water-resistance lacquer including anti termite treatment for existing floor including the following specification and conditions complete all as specified and directed. Make : Junckers Maple Wooden flooring, Royal Sprots flooring or any other approved make. Technical Specificaion : -

(a) Surface Finishing : Surface board Mapel Wood sports Flooring finishing with 21mm thick, 53 to 90 mm wide and in random length in tongue and groove shape. The edges of the boards should have finger lock groove and the bottom side with air pass groove. (b) Substructure : The under frame made of pine wood runners of 70mmx45mm, treated with anti-termite solution and fixed on the bottom side with 10/19mm thick air cushioned pads, stapled through the two wings at 300mx300mm. Installation - IPS subfloor treated with a vapour barrier to be placed on the leveled IPS sub floor before laying the under frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 350mm in 1 direction. (c) Vapour Barrier : Vapour barrier between the concrete and wooden floor comprising of 0.20mm thick or 600 microne polyethylene membrane installed over the existing levelled concrete/PCC base beneth the flooring system. (d) Marking : Game line marked in specified colours using polyurethane enamel paints and to the WSF standards accordance with manufacturers specification and as directed. (e) Flooring : The flooring shall be of make approved by FIBA (Federation International Basketball Association), BWF (Badminton World Federation) and WSF (World Squash Federation). (f) Surface Finishing : The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. an expansion of 12 to 15 mm to be left open between the wooden flooring the the surrounding tiled area / walls. Finishing - After installation the floor will be machine sanded in uniform level with lacquer finish using water based imported bona Tec, Non-skid polyurethane lacquer of approved make. Game line marking to be carried out in required colors before applying the finishing coat.

M&L for providing and injecting chemical emulsion for post constuctional Anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 ltrs per Sqm of the verticle surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ 1 ltr per hole, 300mm apart including drilling and plugging 12mm dia holes and after treatement the same will be filled with CM 1:2 (1 Cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

S&F in repairs Powder coated Anodised aluminium grill (Dyed to required shade accoring to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws@ 200 mm centre to centre, inicluding cutting the grill to proper opening size for fixing and operating of handles and fixing approved anodised amluminium standard section around the opening, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),of capacity 500ltrs hoisted and fixed in position as specified in SSR Part I complete all as specified and directed.

S&F vitreous china wash hand basin white flat back size 550mmx400mm excluding taps waste chain and plug and percelain stopper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surfaces of breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern) white including seat & cover, flush pipe, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm fixed to pipes and valves complete all as specified and directed.

S&F 15 mm bore bib taps cast copper alloy with Chromium plated crutch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparing the plaster surface using one coat of surafce binder of approved make (like Duralex) to strengthen the surface, applying three coats of water based squash court paint WB 147 to wall, colour white or as approved over surface on walls, ceiling of squash court over a coat of primer using roller or airless spray, paint should be tough, durable and scuff resistant. Recoating time between two coats shall be between 4 to 6 hrs complete all as specified and directed. Make : Coo-Var/Duralex/DWP.

M&L for squash court red line marking paint of any approved make RAL3020 or BS04E53 red or WB147 red complete all as specified and directed. Make : Coo-Var/Duralex/DWP.

S&F 10mm Squash Court Aluminum Glass Door Lock set of min size 10" x 8" suitable for fixing for glass panel shutters with all necessary fixing material complete all as specified and directed. Make : Dorma/Goodrej or IS equivalent.

M&L for complete removal of existing treatment (Cement Base Paint/White Wash/OBD/Exterior weather paint/Oil paint etc) of external decorative surface from walls, cornices, jambs, cills, parapet wall, pillars etc or any other description by scrapping with mechanical wall sander (having mechanical vacume mechanism) with RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint, removal of nails etc including fillings depression surfaces, cracks/holes by waterproof cement based putty complete by skilled labour to the entire satisfaction complete all as specified and directed.

M&L for preparation of external old decorative surfaces of walls and applying two coat of weather shield/weather proof Acrylic exterior emulsion paint by skilled labour and applying one coat of water based/water proof exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note : Exterior emulsion paint to be done by roller. (Colour and shade as per new colour scheme approved by GE)

M & L for complete removal existing treatment of old decorative interior surface of walls (i.e. white wash, colour wash, cement base paint, synthetic enamel paint etc.) and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. Note : Exterior emulsion paint to be done by roller. (Colour and shade as per new colour scheme approved by GE)

M & L for preparing of old decorative surface of ceilings and applying two coat of white wash on ceiling including cornices etc complete including filling cracks with wall care putty wherever necessary complete all as specified & directed.

PK CONSULTANT (BID ID -3497892)