Loading
Loading…
Loading…
Tender Value
₹6.1 Cr
EMD Value
₹9.2 L
Closing Date
28 Sept 2026, 11:00 pm
Ryots Agricultural Produce Co-operative Marketing Socuety Ltd
MANAGING DIRECTOR
08232224038
CONSTRUCTION OF COMMERCIAL COMPLEX BUILDING AT RAPCMS LTD YARD IN MANDYA
RAPCMS/2026-27/BD/WORK_INDENT1
RAPCMS/2026-27/BD/WORK_INDENT1
Open
Buildings
Two Tender Document System(Two Cover)
Ryots Agricultural Produce Co-operative Marketing Socuety Ltd Mandya
9 documents required · 9 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Executed in any one year, the following minimum quantities of work (1) Earth Work Excavation 2710.00 Cum, (2) Cement concrete both PCC and RCC 1837.00 Cum, (3) Reinforcement of Steel 134.057 Tonne, (4) Providing and constructing load bearing wall with Solid Concrete blocks 1434.00 Sqm, (5) Providing cement plaster 8299.00 Sum, (6) Providing and fixing ceramic tiles 2533.00 Sqm, (7) Providing and applying Painting 16631.00, (8) Supply and fixing ACP Sheets for front elevation 1 Job and (9) Design supplying erecting testing and commissioning of Passenger lift with speed of 1mtr per second and supplying and commissioning of internal and external electrification of the building 1 Job
c) The Contractor shall carryout Geotechnical investigation at site to assess the Actual Safe Bearing Capacity (SBC) of soil required for design of foundation of building at his own cost and and Submit the Structural Design Drawings for all elements (ex: Footings, Columns, Plinth beams, Staircase, Lintel, Chejja, Roof slabs, beams etc) for all the floors at his own cost and Must take prior approval from the employer for all the Structural drawings before starting of the work
b)Satisfactorily completed (at least 90 present of the contract value) as prime contractor, at least one similar work such as CONSTRUCTION OF BUILDINGS OF VALUE NOT LESS THAN RS 306.15 LAKHS (usually not less than 50 present estimated value of contract)
Availability by owning at least 50 present of the required / specified key and critical equipment for this work and the remaining 50 present can be deployed on lease / hire basis for all works provided, the relevant documents ( Commitment agreements, RC book, Purchase invoice, sale deed, hire/lease deed , latest Bextracts, latest insurance copy etc) for availability for this work are furnished (1) Hydraulic Excavator 2 No (1 own and 1 hire or lease), (2) Lorry/Tipper 2 No (1 own and 1 hire or lease), (3) Self-Loading /Transit Concrete mixer 2 No (1 own and 1 hire or lease), (4) Hydraulic Crane 1 No (1 own or hire or lease) and (5) Pin Vibrator 2 No (2 own or hire or lease)
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 (a)Achieved in at least two financial years a minimum financial turnover (i,e from 2021-22 to 2025-26) (in all classes of civil engineering construction works only) of Rs 1224.60 Lakhs (Attach certificates from chartered accountant ALONG WITH UDIN NUMBER)
Liquid assets and /or availability of credit facilities of not less than Rs 226.42Lakhs(Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.)
The Bidder must compulsorily visit the site before coating the tender. The site visit report has to be duly signed by the Managing Engineering and compulsory up load along with the bid
Earnest Money Deposit (EMD) Rs 919000.00
₹5,000
₹9.2 L
25 Aug 2026
25 Aug 2026
30 Sept 2026
25 Sept 2026
21 Sept 2026
TENTATIVE PHYSICAL / FINANCIAL ACTIVITY CHART
Name of work : Construction of Commercial Building at RAPCMS Premises Mysore Bangalore Road Mandya
Total Duration - 11 Months (Including Monsoon) Indent no : RAPCMS/2026-27/BD/WORK_INDENT1 APT Rs 06,12,29,744.64 KW 4
Sl. No. Activity Unit Quantity Rate Amount ( in Rs) Physical Financial Progress (in lakhs)
1st Month 2nd Month 3rd Month 4th Month 5th Month 6th Month 7th Month 8th Month 9th Month 10th Month 11th Month Total
PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL
1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 3355.38 105.06 950 1750 655.38
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates,The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.) etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 272.87 5775.21 80 120 72.87
3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 1433.94 273.98 250 450 550 183.94
4 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 552.12 6926.91 50 150 180 50 50 50 22.12
5 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 34.77 10903.48 5 8 12 9.77
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 27.06 11791.23 3 5 6 8 0.999
7 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 172.31 7055.19 40 55 40 20 0.999
8 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 25.78 9620.72 8 8 8 1.78
9 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 95.86 6413.81 15 25 20 28 7.86
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 216.3 11097.63 50 75 50 30 11.3
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 352.64 10404.03 60 50 80 90 50 22.64
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 27.06 11860.59 5 8 9 3 2.06
13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 111.42 11166.99 30 25 25 10 12 5 4.42
14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 154.32 10473.39 40 30 30 25 20 5 4.32
15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 12.51 11929.95 6 6.51
16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 13.12 11236.35 6 7.12
17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 9.11 10542.75 9.11
18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 125.491 93177.92 70 10 10 15 5 6 5 4.491
19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 40.52 94987.2 25 5 5 2 2 1 0.52
20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 1.56 94987.2 0.5 0.5 0.56
21 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 759.2 1265.87 60 100 100 100 120 120 120 39.2
22 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1032.68 1278.16 180 200 120 150 100 120 100 62.68
23 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by weldingetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 476.28 173.04 230 246.28
24 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 473.4 2711.99 230 243.4
25 Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge..etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 52 3178.58 52
26 Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 218.26 6786.67 90 128.26
27 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1467.46 217.33 517.46 200 350 400
28 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1618.16 219.44 350 350 450 468.16
29 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. .etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3163.84 262.65 300 650 850 950 413.84
30 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. .etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2097.13 265.2 650 650 250 350 197.13
31 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 827.29 357.41 350 250 100 127.29
32 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1187.21 360.88 350 260 280 200 97.21
33 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 11.39 1135.06 5 6.39
34 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 56.86 1489.38 30 26.86
35 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile Size of Tile 600x1200 mm etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1429.12 1349.3 650 350 400 29.12
36 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalentetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 916.93 2535.86 280 300 336.93
37 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 751.42 334.75 280 300 171.42
38 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made))etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 22.68 5890.57 22.68
39 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, - with one side prelam covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges..etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 9.45 2436.98 9.45
40 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Chargetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.78 4605.13 3.78
41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 7455.34 103 7455.34
42 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7455.34 141.11 7455.34
43 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2632.16 179.22 2632.16
44 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1024.45 143.17 1024.45
45 Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of >200 N (as per ASTM E154), with an overlap of 100mm on the side and 100mm in vertical lapping over a coat bituminuos primer @ 0.25 l/m2, complete including surface preparation as per the methodology and site condition & placing the dimple board over the SBS membrane. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1110.64 783.83 650 460.64
46 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1110.64 111.24 650 460.64
47 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 5961.6 581.95 1000 2000 2500 461.6
48 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 5 3174.46 5
49 Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C. pan of size 580 X 440etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 6 2400.93 6
50 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 MM Diaetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 150 249.26 150
51 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 MM Dia etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 150 327.54 150
52 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work L 2000 9.27 2000
53 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) PVC pipes 140mm dia 6kg/sqcm (common Rmt 150 601.52 150
54 Providing and fixing brass bib cock of approved quality 20 mm nominal bore etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 10 314.15 10
55 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 15 5617.62 15
56 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Mtr 96 202.91 96
57 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 31.24 488.22 31.24
58 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired densityetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 36.75 2635.77 36.75
59 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 245 1100.04 245
60 Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 PCC M20 grade for kerb Cast in Situ etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Mtr 70 272.95 70
61 Supply and fixing ACP Sheets for front elevation inclufing cost of materials loading and un loading lifting charges etc complete as per the drawings and as per the directions of Engineer in charge of the work Job 1 2669492 0.1 0.2 0.4 0.2 0.1
62 Design supplying erecting testing and commissioning of Passenger lift with speed of 1mtr per second and supplying and commissionning of internal and external electrification of the building including of cost of materials labour etc complete with all lead and lifs and as per the directions of Engineer in charge of the work Job 1 3813559 0.3 0.4 0.2 0.1
Milestone 1st Milestone 2st Milestone 3st Milestone
Cumulative Milstone
APT Milestones and liquidity damages
MILESTONES AMOUNT Liquidity damage
Self loading Concrete mixer-2(1 OWN & 1 own/hire/lease) 5218549.533899999 Earth Work Excavation and Embankment (Combined Quantity) Cum 2710.00 Cum
Vibrator roller-1 own/hire/lease Cement Concrete both PCC and RCC Cum 1837.00 Cum
Reinforcement of Steel Tonne 134.057 Tonne
Providing and constructing load bearing wall with Solid Concrete blocks Sqm 1434.00 Sqm
Providing cement plaster Sqm 8299.00 Sqm
Providing and fixing ceramic tiles Sqm 2533.00 Sqm
Providing and applying Painting Sqm 16631.00 Sqm
Supply and fixing ACP Sheets for front elevation Job 1 1 Job
Design supplying erecting testing and commissioning of Passenger lift with speed of 1mtr per second and supplying and commissionning of internal and external electrification Job 1 1 Job
EMD mini In Rs 919000
Annual turn over - In Lakhs 1224.6
Line of credit In Lakhs 226.42
Similar nature of work - In Lakhs 306.15
TENTATIVE PHYSICAL / FINANCIAL ACTIVITY CHART
PÁªÀÄUÁjAiÀÄ ºÉ¸ÀgÀÄ : ZÁªÀÄgÁd£ÀUÀgÀ f¯Éè UÀÄAqÀÄè¥ÉÃmÉ vÁ®ÆèPÀÄ ¨ÁZÀºÀ½î UÁæªÀÄzÀ §½ ºÀjAiÀÄĪÀ UËqÀgÀºÀ¼ÀîzÀ°è ¸ÀgÀt ZÉPïqÁåA ¤ªÀiÁðt PÁªÀÄUÁj
Total Duration - 11 Months (Including Monsoon) Indent no : MI/2026-27/OW/WORK_INDENT11815 APT Rs 06,12,29,744.64 KW 4 0.369789276679906
Sl. No. Activity Unit Quantity Rate Amount ( in Rs) Physical Financial Progress (in lakhs)
1st Month 2nd Month 3rd Month 4th Month 5th Month 6th Month 7th Month 8th Month 9th Month 10th Month 11th Month Total
PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL PHYSICAL FINANCIAL
1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 3355.38 1 105.06 352516.22280000005 950 99807 1750 183855 655.38 68854.2228 0 0 0 0 0 0 0 0 3355.38 352516.2228 0 0
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates,The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.) etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 272.87 2 5775.21 1575881.5527 0 80 462016.8 120 693025.2 72.87 420839.5527 0 0 0 0 0 0 0 272.87 1575881.5527000001 0 0
4 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 552.12 2 6926.91 3824485.5492 50 346345.5 150 1039036.5 180 1246843.8 50 346345.5 50 346345.5 50 346345.5 22.12 153223.2492 0 0 0 0 552.12 3824485.5492000002 0 0
5 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 34.77 2 10903.48 379113.99960000004 0 0 0 0 0 5 54517.399999999994 0 8 87227.84 12 130841.76 9.77 106526.9996 0 34.769999999999996 379113.9996 0 0
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 27.06 2 11791.23 319070.6838 0 0 0 0 0 3 35373.69 5 58956.149999999994 6 70747.38 8 94329.84 0.999 59663.623799999994 0 27.06 319070.6838 0 0
7 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 172.31 2 7055.19 1215679.7889 0 0 0 0 0 40 282207.6 55 388035.44999999995 40 282207.6 20 141103.8 0.999 122125.33889999999 0 172.31 1215679.7889 0 0
8 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 25.78 2 9620.72 248022.1616 0 0 0 0 0 8 76965.76 8 76965.76 8 76965.76 1.78 17124.8816 0 0 25.78 248022.16159999996 0 0
9 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 95.86 2 6413.81 614827.8266 0 0 0 0 0 15 96207.15000000001 25 160345.25 20 128276.20000000001 28 179586.68000000002 7.86 50412.54660000001 0 95.86 614827.8266 0 0
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 216.3 2 11097.63 2400417.369 0 0 0 0 0 50 554881.5 75 832322.2499999999 50 554881.5 30 332928.89999999997 11.3 125403.219 0 216.3 2400417.369 0 0
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 352.64 2 10404.03 3668877.1392 0 0 0 0 0 60 624241.8 50 520201.50000000006 80 832322.4 90 936362.7000000001 50 520201.50000000006 22.64 235547.2392 352.64 3668877.1392 0 0
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 27.06 2 11860.59 320947.56539999996 0 0 0 0 0 5 59302.95 8 94884.72 9 106745.31 3 35581.770000000004 2.06 24432.8154 0 27.060000000000002 320947.5654 0 0
13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 111.42 2 11166.99 1244226.0258 0 30 335009.7 25 279174.75 25 279174.75 10 111669.9 12 134003.88 5 55834.95 4.42 49358.095799999996 0 0 0 111.42 1244226.0258 0 0
14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 154.32 2 10473.39 1616253.5447999998 0 40 418935.6 30 314201.69999999995 30 314201.69999999995 25 261834.75 20 209467.8 5 52366.95 4.32 45245.0448 0 0 0 154.32 1616253.5447999998 0 0
15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 12.51 2 11929.95 149243.6745 0 0 0 0 0 0 0 6 71579.70000000001 6.51 77663.9745 0 0 12.51 149243.67450000002 0 0
16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 13.12 2 11236.35 147420.91199999998 0 0 0 0 0 0 0 6 67418.1 7.12 80002.812 0 0 13.120000000000001 147420.912 0 0
17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 9.11 2 10542.75 96044.4525 0 0 0 0 0 0 0 0 0 9.11 96044.4525 0 9.11 96044.4525 0 0
26 Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 218.26 2 6786.67 1481258.5942 0 0 0 0 0 0 0 0 0 90 610800.3 128.26 870458.2942 218.26 1481258.5942000002 0 0
18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 125.491 3 93177.92 11692990.358719999 70 6522454.399999999 10 931779.2 10 931779.2 15 1397668.8 5 465889.6 6 559067.52 5 465889.6 4.491 418462.03871999995 0 0 0 125.491 11692990.35872 0 0
19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 40.52 3 94987.2 3848881.344 0 25 2374680 5 474936 5 474936 2 189974.4 2 189974.4 1 94987.2 0.52 49393.344 0 0 0 40.519999999999996 3848881.344 0 0
20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 1.56 3 94987.2 148180.032 0 0 0 0 0 0 0.5 47493.6 0.5 47493.6 0.56 53192.832 0 0 1.56 148180.032 0 0
21 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 759.2 4 1265.87 961048.504 0 0 60 75952.2 100 126586.99999999999 100 126586.99999999999 100 126586.99999999999 120 151904.4 120 151904.4 120 151904.4 39.2 49622.104 0 759.2 961048.504 0 0
22 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1032.68 4 1278.16 1319930.2688000002 0 0 180 230068.80000000002 200 255632.00000000003 120 153379.2 150 191724 100 127816.00000000001 120 153379.2 100 127816.00000000001 62.68 80115.06880000001 0 1032.68 1319930.2688 0 0
27 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1467.46 5 217.33 318923.08180000004 0 0 0 0 0 0 517.46 112459.58180000001 200 43466 350 76065.5 400 86932 0 1467.46 318923.08180000004 0 0
28 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1618.16 5 219.44 355089.0304 0 0 0 0 0 0 350 76804 350 76804 450 98748 468.16 102733.0304 0 1618.16 355089.0304 0 0
29 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. .etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3163.84 5 262.65 830982.576 0 0 0 0 0 0 300 78795 650 170722.49999999997 850 223252.49999999997 950 249517.49999999997 413.84 108695.07599999999 3163.84 830982.5759999999 0 0
30 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. .etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2097.13 5 265.2 556158.876 0 0 0 0 0 650 172380 650 172380 250 66300 350 92820 197.13 52278.876 0 2097.13 556158.876 0 0
31 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 827.29 5 357.41 295681.71890000004 0 0 0 0 0 0 350 125093.50000000001 250 89352.5 100 35741 127.29 45494.71890000001 0 827.29 295681.7189 0 0
32 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1187.21 5 360.88 428440.3448 0 0 0 0 0 350 126308 260 93828.8 280 101046.4 200 72176 97.21 35081.144799999995 0 1187.21 428440.3448 0 0
33 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 11.39 7 1135.06 12928.3334 0 0 0 0 0 0 0 0 5 5675.299999999999 6.39 7253.033399999999 0 11.39 12928.3334 0 0
34 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 56.86 7 1489.38 84686.1468 0 0 0 0 0 0 0 0 30 44681.4 26.86 40004.7468 0 56.86 84686.1468 0 0
35 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile Size of Tile 600x1200 mm etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1429.12 7 1349.3 1928311.6159999997 0 0 0 0 0 0 0 650 877045 350 472255 400 539720 29.12 39291.616 1429.12 1928311.616 0 0
36 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalentetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 916.93 7 2535.86 2325206.1098 0 0 0 0 0 0 0 0 280 710040.8 300 760758 336.93 854407.3098 916.9300000000001 2325206.1098 0 0
37 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 751.42 7 334.75 251537.84499999997 0 0 0 0 0 0 0 0 280 93730 300 100425 171.42 57382.844999999994 751.42 251537.845 0 0
41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 7455.34 10 103 767900.02 0 0 0 0 0 0 0 0 0 0 7455.34 767900.02 7455.34 767900.02 0 0
42 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7455.34 10 141.11 1052023.0274 0 0 0 0 0 0 0 0 0 0 7455.34 1052023.0274 7455.34 1052023.0274 0 0
43 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2632.16 10 179.22 471735.7152 0 0 0 0 0 0 0 0 0 0 2632.16 471735.7152 2632.16 471735.7152 0 0
44 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1024.45 10 143.17 146670.5065 0 0 0 0 0 0 0 0 0 0 1024.45 146670.5065 1024.45 146670.5065 0 0
45 Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of >200 N (as per ASTM E154), with an overlap of 100mm on the side and 100mm in vertical lapping over a coat bituminuos primer @ 0.25 l/m2, complete including surface preparation as per the methodology and site condition & placing the dimple board over the SBS membrane. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1110.64 10 783.83 870552.9512000001 0 0 0 0 0 0 0 0 0 650 509489.5 460.64 361063.4512 1110.6399999999999 870552.9512 0 0
46 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1110.64 10 111.24 123547.59360000001 0 0 0 0 0 0 0 0 0 650 72306 460.64 51241.59359999999 1110.6399999999999 123547.5936 0 0
61 Supply and fixing ACP Sheets inclufing cost of materials loading and un loading lifting charges etc complete as per the drawings and as per the directions of Engineer in charge of the work Job 1 12 2669492 2669492 0 0 0 0 0 0 0.1 266949.2 0.2 533898.4 0.4 1067796.8 0.2 533898.4 0.1 266949.2 1.0000000000000002 2669492 0 0
62 Design supplying erecting testing and commissioning of Passenger lift with speed of 1mtr per second and supplying and commissionning of internal and external electrification of the building including of cost of materials labour etc complete with all lead and lifs and as per the directions of Engineer in charge of the work Job 1 12 3813559 3813559 0 0 0 0 0 0 0 0.3 1144067.7 0.4 1525423.6 0.2 762711.8 0.1 381355.9 1 3813559 0 0
3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 1433.94 273.98 392870.88120000006 0 250 68495 450 123291.00000000001 550 150689 183.94 50395.8812 0 0 0 0 0 0 1433.94 392870.8812 0 0
23 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by weldingetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 476.28 173.04 82415.49119999999 0 0 0 0 0 0 0 0 0 230 39799.2 246.28 42616.2912 476.28 82415.49119999999 0 0
24 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 473.4 2711.99 1283856.0659999999 0 0 0 0 0 0 0 0 0 230 623757.7 243.4 660098.3659999999 473.4 1283856.0659999999 0 0
25 Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge..etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 52 3178.58 165286.16 0 0 0 0 0 0 0 0 0 0 52 165286.16 52 165286.16 0 0
38 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made))etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 22.68 5890.57 133598.12759999998 0 0 0 0 0 0 0 0 22.68 133598.12759999998 0 0 22.68 133598.12759999998 0 0
39 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, - with one side prelam covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges..etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 9.45 2436.98 23029.461 0 0 0 0 0 0 0 9.45 23029.461 0 0 0 9.45 23029.461 0 0
40 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Chargetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.78 4605.13 17407.3914 0 0 0 0 0 0 0 3.78 17407.3914 0 0 0 3.78 17407.3914 0 0
47 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 5961.6 581.95 3469353.1200000006 0 0 0 0 0 0 1000 581950 2000 1163900 2500 1454875 461.6 268628.12000000005 0 5961.6 3469353.12 0 0
48 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 5 3174.46 15872.3 0 0 0 0 0 0 0 0 0 0 5 15872.3 5 15872.3 0 0
49 Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C. pan of size 580 X 440etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 6 2400.93 14405.579999999998 0 0 0 0 0 0 0 0 0 0 6 14405.579999999998 6 14405.579999999998 0 0
50 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 MM Diaetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 150 249.26 37389 0 0 0 0 0 0 0 0 0 0 150 37389 150 37389 0 0
51 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 MM Dia etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 150 327.54 49131 0 0 0 0 0 0 0 0 0 0 150 49131 150 49131 0 0
52 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work L 2000 9.27 18540 0 0 0 0 0 0 0 0 0 0 2000 18540 2000 18540 0 0
53 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) PVC pipes 140mm dia 6kg/sqcm (common Rmt 150 601.52 90228 0 0 0 0 0 0 0 0 0 0 150 90228 150 90228 0 0
54 Providing and fixing brass bib cock of approved quality 20 mm nominal bore etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 10 314.15 3141.5 0 0 0 0 0 0 0 0 0 0 10 3141.5 10 3141.5 0 0
55 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 15 5617.62 84264.3 0 0 0 0 0 0 0 0 0 0 15 84264.3 15 84264.3 0 0
56 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Mtr 96 202.91 19479.36 0 0 0 0 0 0 0 0 0 0 96 19479.36 96 19479.36 0 0
57 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 31.24 488.22 15251.9928 0 0 0 0 0 0 0 0 0 0 31.24 15251.9928 31.24 15251.9928 0 0
58 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired densityetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 36.75 2635.77 96864.5475 0 0 0 0 0 0 0 0 0 0 36.75 96864.5475 36.75 96864.5475 0 0
59 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 245 1100.04 269509.8 0 0 0 0 0 0 0 0 0 0 245 269509.8 245 269509.8 0 0
60 Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 PCC M20 grade for kerb Cast in Situ etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Mtr 70 272.95 19106.5 0 0 0 0 0 0 0 0 0 0 70 19106.5 70 19106.5 0 0
Milestone 1st Milestone 2st Milestone 3st Milestone 0.021
APT 61229744.64161998 Milestones and liquidity damages
MILESTONES AMOUNT Liquidity damage
Self loading Concrete mixer-2(1 OWN & 1 own/hire/lease) 5218549.533899999 Earth Work Excavation, De-Silting and Embankment (Combined Quantity) 2155.31 Cum 1724.248 4426.00 Cum
Vibrator roller-1 own/hire/lease Cement Concrete both PCC and RCC 61.83 Cum 49.464 1108.00 Cum
Reinforcement of Steel 172.31 Tonne 0.200 13.339 Tonne
Stone Pitching / Revetment Sqm 225.47 Sqm
EMD 0.701 mini In Rs 200000
Annual turn over 0.999 - In Lakhs 239.64
Line of credit 0.235 226.42102982320003 In Lakhs 36.55
Similar nature of work 0.999 - In Lakhs 59.91
STAR RATES STATEMENT
Name of work : Construction of Commercial Building at RAPCMS Premises Mysore Bangalore Road Mandya
Total Duration - 11 Months (Including Monsoon)
Sl. No. Activity Unit Quantity Rate Amount ( in Rs) AS PER DATA RATES
Qty Rate Amount Qty Rate Amount
1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 3355.38 105.06 352516.22 Star rate not applicable
2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates,The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.) etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 272.87 5775.21 1575881.55 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 1433.94 273.98 392870.88 Star rate not applicable
4 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 552.12 6926.91 3824485.55 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
5 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 34.77 10903.48 379114.00 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
6 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 27.06 11791.23 319070.68 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
7 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 172.31 7055.19 1215679.79 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
8 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 25.78 9620.72 248022.16 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
9 Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 95.86 6413.81 614827.83 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 216.30 11097.63 2400417.37 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 352.64 10404.03 3668877.14 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 27.06 11860.59 320947.57 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 111.42 11166.99 1244226.03 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 154.32 10473.39 1616253.54 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 12.51 11929.95 149243.67 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 13.12 11236.35 147420.91 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 9.11 10542.75 96044.45 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 125.49 93177.92 11692990.36 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 40.52 94987.20 3848881.34 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
20 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Tonne 1.56 94987.20 148180.03 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
21 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 759.20 1265.87 961048.50 Star rate not applicable
22 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1032.68 1278.16 1319930.27 Star rate not applicable
23 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by weldingetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 476.28 173.04 82415.49 Star rate not applicable
24 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 473.40 2711.99 1283856.07 Star rate not applicable
25 Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge..etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Each 52.00 3178.58 165286.16 Star rate not applicable
26 Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 218.26 6786.67 1481258.59 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
27 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1467.46 217.33 318923.08 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
28 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1618.16 219.44 355089.03 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
29 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. .etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3163.84 262.65 830982.58 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
30 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. .etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2097.13 265.20 556158.88 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
31 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 827.29 357.41 295681.72 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
32 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1187.21 360.88 428440.34 (Only star rates for cement and steel given as per the prevailing G.O No : PWD/159 CRM dt: 30-09-2010 )
33 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 11.39 1135.06 12928.33 Star rate not applicable
34 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 56.86 1489.38 84686.15 Star rate not applicable
35 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile Size of Tile 600x1200 mm etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1429.12 1349.30 1928311.62 Star rate not applicable
36 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalentetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 916.93 2535.86 2325206.11 Star rate not applicable
37 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 751.42 334.75 251537.85 Star rate not applicable
38 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made))etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 22.68 5890.57 133598.13 Star rate not applicable
39 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, - with one side prelam covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges..etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 9.45 2436.98 23029.46 Star rate not applicable
40 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Chargetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 3.78 4605.13 17407.39 Star rate not applicable
41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 7455.34 103.00 767900.02 Star rate not applicable
42 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 7455.34 141.11 1052023.03 Star rate not applicable
43 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 2632.16 179.22 471735.72 Star rate not applicable
44 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1024.45 143.17 146670.51 Star rate not applicable
45 Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of >200 N (as per ASTM E154), with an overlap of 100mm on the side and 100mm in vertical lapping over a coat bituminuos primer @ 0.25 l/m2, complete including surface preparation as per the methodology and site condition & placing the dimple board over the SBS membrane. The cost is inclusive of surface preparation, crack filling, repair of loose mortar etc. completely as per specification etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1110.64 783.83 870552.95 Star rate not applicable
46 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 1110.64 111.24 123547.59 Star rate not applicable
47 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Kg 5961.60 581.95 3469353.12 Star rate not applicable
48 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 5.00 3174.46 15872.30 Star rate not applicable
49 Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C. pan of size 580 X 440etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 6.00 2400.93 14405.58 Star rate not applicable
50 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 MM Diaetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 150.00 249.26 37389.00 Star rate not applicable
51 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 MM Dia etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Rmt 150.00 327.54 49131.00 Star rate not applicable
52 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work L 2000.00 9.27 18540.00 Star rate not applicable
53 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) PVC pipes 140mm dia 6kg/sqcm (common Rmt 150.00 601.52 90228.00 Star rate not applicable
54 Providing and fixing brass bib cock of approved quality 20 mm nominal bore etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 10.00 314.15 3141.50 Star rate not applicable
55 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Nos 15.00 5617.62 84264.30 Star rate not applicable
56 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Mtr 96.00 202.91 19479.36 Star rate not applicable
57 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 31.24 488.22 15251.99 Star rate not applicable
58 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired densityetc complete with all lead and lifts and as per the directions of Engineer in charge of the work Cum 36.75 2635.77 96864.55 Star rate not applicable
59 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Sqm 245.00 1100.04 269509.80 Star rate not applicable
60 Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 PCC M20 grade for kerb Cast in Situ etc complete with all lead and lifts and as per the directions of Engineer in charge of the work Mtr 70.00 272.95 19106.50 Star rate not applicable
61 Supply and fixing ACP Sheets for front elevation inclufing cost of materials loading and un loading lifting charges etc complete as per the drawings and as per the directions of Engineer in charge of the work Job 1.00 2669492.00 2669492.00 Star rate not applicable
62 Design supplying erecting testing and commissioning of Passenger lift with speed of 1mtr per second and supplying and commissionning of internal and external electrification of the building including of cost of materials labour etc complete with all lead and lifs and as per the directions of Engineer in charge of the work Job 1.00 3813559.00 3813559.00 Star rate not applicable
Grand Total 61229744.64 0.00 0.00
Executive Engineer,
M.I. & GWD Division, Mysore
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BUIDLING PERT CHART 11 MONTHS.xls
Others - BAR / PERT CHART • 0.15 MB
COMMERCIAL BUILDING DRAWINGS.docx
Others - DRAWINGS • 9.40 MB
COMMERCIAL BUILDING BID DOCUMENTS.doc
Tender Document • 2.72 MB
GOVT NOTI LOC LETTER BY BANK.pdf
Others - GOVT NOTI LOC LETTER BY BANK • 1.72 MB
GO AND TECHNICAL SANCTION.pdf
Others - GO AND TECHNICAL SANCTION • 4.11 MB
STAR RATES GOVERNMEMNT ORDER.pdf
Others - STAR RATES GOVERNMEMNT ORDER • 2.18 MB
COMMERCIAL BUILDING STAR RATES.xlsx
Others - STAR RATES STATEMENT • 0.02 MB
MINERAL DISPATCH PERMIT.zip
Others - MINERAL DISPATCH PERMIT • 6.49 MB
ROYALTY LATEST.pdf
Others - ROYALTY LATEST • 0.36 MB
GO AND CIRCULARS RESTRICTION OF BIDDERS.pdf
Others - GO AND CIRCULARS RESTRICTION OF BIDDERS • 6.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].