Repair Renovation of Sub-Centre Building at Kattal Battal newly upgraded

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. (wood work)

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 ( 1 cement : 3 fine sand ) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area of 3 sq. metres and below

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood (30mm thick)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class deodar wood.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement: 4 fine sand)

Earthwork excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 mtr from cutting Edge, disposed earth is to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) (Crushed)

Brick work with common burnt clay F.P.S (non modualar) bricks of class designation 75 in foundation & plinth in cement mortar 1:4 (1 cement : 4coarse sand).

Extra for brick work in super structure above plinth level upto floor V-level (By manual means).

Extra for brick work in Square or rectangular pillars.

Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering, all work upto floor V level

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20 cms size

Providing and placing on terrace (at all floor levels) polythyne water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for intel, outlet and over flow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license.

Finishing wall with texture exterior paint of required shane on new work (two or more coats applied @ 3.28 litre/10sqm over nad including base coat of water proofing cement pa int applied @ 2.20kg/10sqm.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. Old work (one or more coats).

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on New work.

Supplying and fixing C.l. cover without frame for manholes: 500 mm diameter C.l. cover ( medium duty) the weight of the cover to be not less than 58 kg.

Filling available excavated earth (excl. rock) in trenches, plinth sides of foundation etc in layers not exceeding 20cm in depth; consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc 15 mm dia. Nominal bore Medium.

Providing and fixing G.I. Pipes complete with G.I. Fitings incl. trenching and refiling etc15 mm dia. Nominal bore. (External work)

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work). 20 mm dia. nominal bore

Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to I.S: 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required W.C pan with ISI marked white solid plastic seat and lid.

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Dismentling roofing including ridge, hip vally and gutter of G.S Sheet .

Providing and Fixing PVC Sheet with necessary fitting on Main Gate.

Providing and Fixing 1HP motor with necessary fitting.

Painting of flower and logos around the Windows & Doors. Proper branding as per Health and Wellness Centres Drawings.

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone aggregate below 40mm size for an avg. lead of 20.00 Kms.

Sand for an avg. lead of 10.00 Kms..

Bricks for an avg. lead of 25.00 kms.

Bricks Tiles for an avg. lead of 25.00 kms.

Bashir Ahmed Parrey