REVITALIZATION OF SAINIK SCHOOL SATARA AT SATARA, TALUKA

Amount

Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 metre) By Mechanical Means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (including all lifts and leads) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (including all lifts and leads) By Mechanical Means

Providing preconstructional antitermite treatment as per Indiametern Standard 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per Indiametern Standard 6313 (Part-II) treatment by treating the backfill in imillimetre ediameterte contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per Indiametern Standard 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing preconstructional antitermite treatment as per Indiametern Standard 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 centimetre diameter about 30 -60 centimeter deep at 15 centimeter centre to centre as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Filling in plinth and floors with approved excavated material in 15 centimeter. to 20 centimeter. Layers including watering and compacting etc. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimeter to 20 centimeter including watering and compaction etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimeter to 20 centimeter thick including hand packing and compacting etc. complete.

Providing soling using 80 millimetre size trap metal in 15 centimeter. layer including filling voids with Crushed sand/grit, ramming , watering etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-10 of trap metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data AcquIndian Standard Institutiontion enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-15 of trap metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data AcquIndian Standard Institutiontion enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap metal for Reinforced Cement Concrete. work in foundations like raft, strip foundations, grillage and footings of Reinforced cement Concrete. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data AcquIndian Standard Institutiontion enabled Concrete Batch Mix Plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap metal for Reinforced Cement Concrete. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade)Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete Mix-40 of trap metal for Reinforce cement concrete. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade)Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap metal for Reinforce cement Concrete. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap metal for Reinforce Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc.complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete Mix-30 of trap metal for Reinforced Cement Concrete. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc.complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete Mix-40 of trap metal for Reinforced Cement Concrete. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for Reinforced Cement Concrete. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete Mix-40 of trap metal for Reinforced Cement Concrete. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap metal for Reinforcec cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. ) with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-20 of trap metal for Reinforce cement concrete.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc. complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and laying Cast in situ/Ready Mixcement concrete Mix-25 of trap metal for Reinforced cement concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller (PLC) with Supervisory Control And Data Acquisition enabled Concrete Batch Mix Plant (Pan Mixer) etc.complete. With fine aggregate (Crushed sand Vertical shaft impact (VSI) Grade) Ground floor

First floor

Providing and fixing in position Thermo Mechanically Twisted (TMT) FE - 500 bar reinforcement of various diameter for Reinforced Cement Concrete. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground floor

First floor

Providing fly ash brick masonry with conventional / Indian Standard type fly ash bricks in Cement.Mortar 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Providing fly ash brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Ground floor

First floor

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Ground floor

First floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete ( using Natural Sand)Ground floor

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc. complete Ground floor

First floor

Providing waterproof plaster in Water Closet and bath 12 millimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) Ground floor

First floor

Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. ( using Natural Sand) Ground floor

First floor

Providing internal / external 20 millimetre thick Ready Mix plaster confirming to IS:4031(Part-4) 1988 and IS 383- 1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete Ground floor

First floor

Providing and fixing chicken mesh of 22 gauge, with about 30 centimeter. width at the junction of Reinforcement.Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /Burnt Brick masonry and or tying by binding wire etc. complete. Ground floor

First floor

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. Ground floor

First floor

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx, formaldehydes, etc. ) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recomillimetre ended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Ground floor

First floor

Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc. , washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge. Ground floor

First floor

Providing cement based water proofing treatment to terraces (Indiametern water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement.Mortar.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar.1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre . thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300millimetre x 300 millimetre . making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Ground floor

First floor

Providing waterproofing in Water closet and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cement mortor 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20millimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 Kilogramme per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requIndian Standard Institutionte stamp paper including curing etc. complete. Ground floor

First floor

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Ground floor

First floor

Providing and laying vitrified matt fininsh tiles having size 590 millimetre to 605 millimetre x to 605 millimetre of 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. Ground floor

First floor

Providing and laying vitrified matt finish tiles having size 590 millimetre to 605millimetre x to 605millimetre of 8 to 10millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Ground floor

First floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18millimetre to 20millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in cement mortar. 1:3 curing and cleaning etc. complete. Ground floor

First floor

Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Ground floor

First floor

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. Ground floor

First floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etc. On cement mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. Ground floor

First floor

Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polishGround floor

First floor

Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish Ground floor

First floor

Providing and laying machine cut machine Polished Kota stone flooring 25 millimetre to 30 millimetre thick and required width in plain/ diametermond pattern on bed of 1:6 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Ground floor

First floor

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimetre to 30 millimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. Ground floor

First floor

Providing and laying matt finish ceramic tiles of having size 30 centimeter x 30 centimeter confirming to Indiametern Standard15622/2006 (group D II-A) and 7 to 8 millimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Ground floor

First floor

Providing and laying ceramic tiles of having size 30 centimeter. x 30 centimeter. and confirming to corresponding Indiametern Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground floor

First floor

Providing and Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5millimetre underlay as per Architectural and Acoustical Design and Instructions and Complete in all aspects including all materials labour,finishing etc. complete Ground floor

First floor

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 millimetre thickness of having a strength of 300 Kilogram/Sq.centimeter. of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etc. complete

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 millimetre x 450 millimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 millimetre thick supports with kadappah top 35 to 40 millimetre thick and polished granite 16 to 20 millimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimeter height and top granite of 75 x 40 centimeter including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 meter x 0.60 metre and height is 0.75 meter) Ground floor

First floor

Bamboowood 14 millimetre thick Tile Flooring including quarter round and door reducer - Providing and fixing in position Phenol bonded Epitome Bamboowood flooring with planks of sizes 14millimetre thick, 1800millimetre length (minimum) and 130millimetre wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building materials and Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocaking system, with 2millimetre underlay as sound abrobing and moisture barrier and underlayment of 4millimetre thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface with necessary quarter round planks of size 1900millimetre x 18 millimetre and dorr reducer of size 1900 millimetre x 44millimetre , wherever required. The Epitome Bamboowood planks shall have minimum density of 1000 Kilogramme per cubic metre and minimum Hardness 1000 Kilogram with Eco friendly UV coating, all complete as per direction of Engineer in-charge Ground floor

First floor

Bamboowood 14millimetre thick wall Skirting - Providing and fixing in position Phenol bonded Epitome Bamboowood in wall skirting with planks of sizes 14millimetre thick, 1900 millimetre length (minimum) and 85 millimetre wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building materials and Technology Promotion Council (BMTPC). The skirting shall be fixed SS screws and rawl plugs, over underlayment of 4millimetre thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface. The Epitome Bamboowood planks shall have minimum density 1000 Kilogramme per cubic metre and minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge Ground floor

First floor

Providing and fixing 30 millimetre thick SOLID PANEL Poly vinyl chloride INTERNAL DOOR SHUTTER consisting of frame made out of Mild Steel tubes of 19 gauge thickness and size of 40millimetre x 20millimetre for stiles ,top, lock and bottom rails. Mild Steel frame shall have a coat of steel primers of approved make and manufacture. Mild Steel frame shall be covered with 5millimetre thick heat molded Poly vinyl chloride channel of size 30 x 100millimetre forming stiles, and 5millimetre thick, 125millimetre wide Poly vinyl chloride sheets for top rail, lock rail and bottom rail on either side, and 15millimetre (5millimetre x 3) thick, 20millimetre wide cross Poly vinyl chloride sheet as gap insert for top rail and bottom rail. Paneling of 10 millimetre thick prelam Poly vinyl chloride sheet to be fitted in the Mild Steel frame welded / sealed to the stiles and rails with 30millimetre wide x 5millimetre thick Poly vinyl chloride sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5millimetre thick Poly vinyl chloride strip of 20millimetre width is to be stuck on the interior side of the C Channel using Poly vinyl chloride solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineer-in-charge, manufacturer's specification and drawing. Ground floor

First floor

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 millimetre thick, decorative types, of exterior grade, as per detailed drawings, conforming to Indiametern Standard:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame). Commercial Hard Wood shutter Ground floor

First floor

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35millimetre thick,decorative type of exterior grade, as per detailed drawings, conforming to Indiametern Standard: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame) Commercial Hard Wood shutter Ground floor

First floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300millimetre x 40millimetre x 5millimetre with oil painting, etc. complete Ground floor

First floor

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Ground floor

First floor

Providing of 120 minute Fire rated lead lined doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 and 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiametertion, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). Lead lined to check radiametertion. Code No; 2 Hour Insulated, Flame, Smoke Radiametertion check Lead Lined Fire Door 57millimetre 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. a) Door Frame: Providing Frames for Lead Lined Fire resistant door shutters 1st class Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 140 X 70 millimetre with 45millimetre thick two layered 3millimetre Lead Line Sheets with 10millimetre overlap from either side and spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10millimetre x4 millimetre concealed in the groove of the Frame for fire and hot and cold smoke sealing, etc. complete as per direction of Engineer in Charge Ground floor

First floor

b) Shutter: Providing of 57millimetre thick asbestos free composite, 'TUFWUD' brand - 3 criteria - fire, heat and smoke check Lead Lined Door Shutter with flame guard of 120 minutes IS3614 part -II comprIndian Standard Institutionng of 2x9 millimetre Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x30 millimetre with 30millimetre thick infill of ceramic fibre (density 128 Kilograms/centimeterT) vermiculite mix, 3millimetre thick Lead Sheet on one side faced and 3 millimetre Fire retardant High Density Fibreboard, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10 millimetre x4millimetre concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping. Ground floor

First floor

c) VIndian Standard Institutionon Panel: 2 Hour rated E Class clear high stress fire rated glass is pre fabricated strategically inside the shutter structure with 10 millimetre inside the shutter on all sides with U- glazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. Ground floor

First floor

Panic Bar: (For 2 Hour fire Rated single Panic bar) Supplying, fitting and fixing Surface mounted Crash Bar/ panic Bar of touch pad style ,made of heavy duty cast iron/ steel body and latches with SS ,BHMA certified and conforming to ANSI A 156.3 for grade-1 ( 3 hours fire rated ) and suitable for surface mounting to wooden/hollow metal/ Al framed door,with maximum operating force 8Kilogram for unlocking easily and outwardly during emergency,complete in all respect as per direction and satisfaction of Engineer-in charge including all taxes and incidental charges. (Note: To be installed at "FIRE EXIT"only under location specific instruction of Eingineer-in -Charge.) Ground floor

First floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 millimetre x 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etc. complete. Ground floor

First floor

Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 " height and 22" depth,supported on aluminium pipes ,trolley basket made out of 5 millimetre stainless steel rod fitted on telescopic channel of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 millimetre PUC coated plywood and colour combination as directed by E-I-Cast Ironnner side of panel covered by white mica ,100 millimetre s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge) Ground floor

First floor

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600 millimetre Lay in tiles of pre coated galvanized steel in 0.5 millimetre thickness in Global white color tile to be laid on grid systems with 15millimetre wide T - section flanges color white having rotary stitching on the Main Runner, 1200 millimetre and 600 millimetre Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600millimetre Lay in tiles of pre coated galvanized steel in 0.5 millimetre thickness in Global white color tile to be laid on grid systems with 15millimetre wide T - section flanges color white having rotary stitching on the Main Runner, 1200 millimetre and 600 millimetre Cross Tees.products approved as per GRIHA and BS 476 etc. complete. Ground floor

First floor

Providing and fixing in position Gypsum board false ceiling with 12.5 millimetre thick Gypsum boards, screwed/fixed to the under structure of suspended Galvanised Iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 millimetre maximum center to center distance of 600 milimetre perimeter channel and intermediameterte channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediameterte channels. Additional intermediameterte channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. Ground floor

First floor

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Ground floor

First floor

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25millimetre to 450 millimetre section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. First floor

Providing and erecting 'Y' type barbed wire fencing with seven rows of wire with 2.45 millimetre diametermeter Galvanised Iron pipe (Rezan/ concentiDeleted ire 0.75 millimetre diameter) with hot dip and Galvanised Iron coated hooks as per drawing supported on Mild Steel angle 50 x 50 x 6 millimetre at 2.5 metre centre to centre including fixing and fastening with wire, painting Mild Steel angles with one coat of red lead primer and two coat of oil paint etc. complete.

Providing and fixing 900millimetre high Stainless Steel 304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 milimete diametermeter and 1.5 millimetre thick vertical supports spaced at 1.5meter center to center and 8millimetre thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete Ground floor

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogramme per Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground floor

First floor

Providing and laying in situ cement concrete Mix-20 with tremix treatment for 100 millimetre thickness for flooring with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen etc. complete.

Providing and Fixing in position Acoustical Doors along with 150 x 150 millimetre teak wood frame, doors made from 50 millimetre Teak wood frame 600 x 600 c to c filled with 1000 Gsm synthetic wool 50millimetre thick and 3millimetre Tecsound from both sides, 12millimetre waterproof ply and veneer from both sides , including 150millimetre heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish and Scaffolding as per Architectural and Acoustical Design and Instructions and Complete in all aspects .including all materials labour,finishing etc. complete Ground floor

First floor

Providing and Fixing in position, Acoustical Ceiling made from Compressed polyester fibre nonwoven 9millimetre panels on approved heavy duty GI frame 300 millimetre c to c and intermediameterte channels at 1200 millimetre c to c, suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing- items and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects including all materials labour,finishing etc. complete Ground floor

First floor

Providing and Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty Galvanised Iron frame, ceiling channels at 300 c to c, and intermediameterte channels not more than 1200 c to c, suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 millimetre thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects including all materials labour,finishing etc. complete Ground floor

First floor

Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15millimetre Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 15millimetre , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 millimetre wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 millimetre and 600 millimetre Cross Tees with a web height of 32 millimetre and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. Ground floor

First floor

Providing and Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre nonwoven 9 millimetre panels on, 50 x 50 millimetre sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 millimetre thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects.including all materials labour,finishing etc. complete Ground floor

First floor

Providing and Fixing in position, Acoustical Panelling made from Wood-wool board 20millimetre on, 50 x 50 millimetre Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 millimetre thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects. including all materials labour,finishing etc. complete Ground floor

First floor

Providing and Fixing in position, Acoustical Panelling made from 12millimetre thick Agro wood strips of 50, 75 7 100 millimetre width on 50 x 50 millimetre Sal-wood frame of 600 x 600 c to c having supports from wall of required length, in front of 1000 gsm synthetic wool 50 millimetre thick with approved coloured fabric on strips side and chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / Melamine Polish and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects. including all materials labour,finishing etc. completeGround floor

First floor

ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: 600X600/1200X25 millimetre Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25millimetre thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600 millimetre (Nominal) or 600x1200millimetre (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50millimetre airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85% Installation:An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer‘s recomillimetre endation. Install wooden batten grid (provided by others) of section 50x50millimetre or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600millimetre and 4 nos. in case of 600x1200millimetre . Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained Ground floor

First floor

Providing and fixing in position Stage flooring Made from 18 millimetre plywood 1200 x 2400 and 18millimetre Teakwood planks 100 x 800 having tongue and grove on Sal-wood frame of 50 x 100 at 600millimetre c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc. , as per Architectural and Acoustical Design and Instructions and Complete in all aspects. .including all materials labour,finishing etc. complete Ground floor

Providing and fixing 50 millimetre diameter medium class Galvanised Iron pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in Cement Concrete. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requIndian Standard Institutionte type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) millimetre Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requIndian Standard Institutionte type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 millimetre ) Aggregate)

Providing and constructing 75 millimetre . thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre . stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 millimetre .size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing and constructing 75 millimetre . thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre . stone layers metal 100% crusher broken metal with conical crusher plant , heating and spraying the bitumen of specified grade @ 2 kilogramme per square metre, spreading 12 millimetre .size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of specified grade of bitumen at the rate of 0.30 kilogramme per square metre on existing bitumen surface. (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates)

Open Graded Premix Surfacing- Providing and Laying Open graded carpet 20 millimetre thickness composed of 13.2 millimetre to 5.6 millimetre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with Supervisory Control And Data Acquisition, Paver and Vibratory roller ( Over Modified Penetraction Macadam Surface) (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne. etc. complete. (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kilogramme per 10 square metre (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates)

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimetre with lock plate of 3.15 millimetre thickness reinforced with 35 x 35 x 5 millimetre angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 millimetre and 3.15 millimetre respectively with hold fast arrangements, Mild Steel Bracket plate 300 x 300 x 3.15 millimetre minimum size and shape with square bar, suspension shaft of minimum 32 millimetre diametermeter, hood cover of Mild Steel sheet not less than 0.9 millimetre thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (Indiametern Standard 62481979) (With mechanical gear)

Providing and fixing corrugated galvanised iron sheets of 0.63millimetre thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kilogramme per square metre).

Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 millimetre thick ACP sheet material consisting of 3millimetre thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 millimetre thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather silicon sealent,backer rods etc. .overall weight of the ACP shall not be less than 7.5 Kilogram/Square Metre)

Providing and casting in situ or precast tapering Reinforced Cement Concrete M-20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125millimetre below ground level over M-10 PCC finished neatly with Cement Mortor. 1:2, setting the same in Cement Mortor. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 millimetre thick of 900 millimetre (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility and strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws and trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervIndian Standard Institutionon to complete the entire panel installation as per drawing and direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12millimetre thick panels shall be used for a roofing height of upto 15 mtrs. First floor

Providing and fixing 45 centimeter wide mild steel ladder of 40millimetre x 6 millimetre mild steel flat stringers and steps of 18 millimetre diameter. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60centimeter x 30centimeter x 30centimeter and painting the ladder complete. (Anti-Corossive Paint) First floor

Providing and fixing bituminous pad 25millimetre thick for expansion joints in retaining wall, compound wall etc. complete.

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc. ). 50millimetre diameter. pipe, 1.5 millimetre thickness and weight 1.92 kilogramme per running metre. Ground floor

First floor

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. Ground floor

Providing Silica plaster plaster externally in two coats in all positions including base coat of 8 to 10 millimetre thick curing the same for not less than two days and keeping the surface of base coat rough to receive the final coat treatment 5 to 7 millimetre thick .finishing the surface by taking out grains and curing for 8 to 10 daysscaffolding etc. complete.(The silica plast material shall contain 53 grade OPC cement with pozzolanic materials .size of agreegates shall be of 3 millimetre having 1:3 proportion with cement. Ground floor

First floor

Providing and fixing of BITUFLEX CLOSE CELL FOAM of size 30 millimetre x 30 millimetre in double layer in the expansion joints in Reinforced cement concrete framed structure (at floor level / at terrace level / interior columns) for overlapping of closed cell foam joints, applying TP- 40 PRIMER on both the sides of concrete surface, filling the 25 millimetre x 25 millimetre gap with the POLYDEE-41 highly flexible sealant and covering the joint with Polydee-LM, 150 millimetre width in 2 coats etc. complete. Ground floor

First floor

Ground floor METAL FALSE CEILING WITHOUT SUSPENSION SUPPORT FROM TRUE CEILING: Providing and fixing horizontal level suspended metal ceilings comprIndian Standard Institutionng of Metalworks F-H 600 Hook-on corridor system manufactured by Armstrong Ceiling Solutions with Rectangular panels made of 0.7millimetre thick Galvanised Steel (GI) of 120gsm, post coated to Global White colour, suitable for Interior applications and architectural finishes, double grid concealed system and butt joint panels. The panel width shall be 300millimetre , length ranging from 1500millimetre to 2660millimetre . General Specifications:Entire system to be designed for Interior applications, and concealed Grid, Butt joint panels. Panel Specifications: Material: The F-H 600 rectangular Hook-on panels to be made of galvanized steel (GI) of minimum 120gsm hot dipped galvanization (both sides included) as per IS 277 (2003), zero or minimum spangled, in minimum base material thickness of 0.7millimetre as per in IS:513 (1994). Dimensions: The panel Length varies between 1500millimetre to 2660millimetre , panel Width shall be 300millimetre . The dimensional tolerances for length shall be ±1.0m up to 1000millimetre L; ±1.5millimetre between 1001 to 2000millimetre L; ±2.0millimetre between 2001 to 3000millimetre L. The dimensional tolerances for width shall be ±0.5m up to 300millimetre W. Dimensional Tolerances for panel Thickness / panel width / panel length - to be measured in accordance with TAIM standards. Edge detail: the panels shall ha+A3ve Square Edge, with a 3millimetre (W) x 8millimetre (H) black foam gasket glued at the edges, typically on one long and one short side. All adjacent panels shall touch each other forming a butt joint and concealed grid visuals. Upturns: The short side of the panel shall have vertical upturns of minimum 30 millimetre (H) and shall be bent appropriately bent as per the manufacturer‘s specifications for providing hook-on ends. The long side shall have inside horizontal bends of 5-15millimetre for rigidity and vertical upturns of 40millimetre (for length ranging from 1251-2660millimetre ). Surface Finish: Plain: The panels shall be in plain unperforated finish (without any acoustical backing / felt). Colour and finishes: The panel surface shall be electrostatically powder coated (post coat) on vIndian Standard Institutionble side after mechanical production, using RoHS compliant powder, to achieve coating thickness ranging from 60-80µ and architectural quality finish. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017, 250 hours of condensation test (as per DIN 50017 or DIN EN ISO 6270-1 Norms), UV resistance of 500 hours and 50% gloss retention (as per ASTM G 154 UVB-313 Norms). The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E (∆e) <1 measured using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523.The colour / shade to be Global White (Polyester for Interior) as approved by the Architect or Engineer-in-charge. Surface Protection: The vIndian Standard Institutionble panel surface shall be protected using a guard film made of LDPE of 50µ thickness, having appropriate surface adhesion (or tackiness) corresponding to surface gloss level. Light reflectance: The panel shall have a Light Reflectance of ≥ 63% in accordance to ASTM 1477-98. Flatness and Sag limit: Panels shall be flattened by precIndian Standard Institutionon leveller to minimize sag to less than Length/400millimetre . The difference between the two diametergonal dimensions of the panel to be less than 1millimetre . The sag to be measured at the center in accordance with TAIM standards. Access and Plenum space: The panels to be Fully Accessible, with system height of 98millimetre , and would require a plenum height of a minimum 450millimetre clear space from bare ceiling / rigid structure for installation. Packaging: The Panels shall be packed in wooden crates of appropriate dimensions based on panel sizes. The wooden planks for rates shall have thickness of approx.15millimetre , width of around 4‖ and gap between two planks around 3‖. Crates to have layer separators of 1‖ x 2‖ dimensions to prohibit load transfer on bottom panels, and the crates lifting to be 2way or 4way. The bottom of crates shall be completely closed, and the panels kept inside shall have cushioning of corrugated sheets or other appropriate material. Installation Specifications: Primary and secondary runners Installation: U-Profiles, spaced at 1200millimetre , to be suspended from ceiling using clamping brackets and threaded rods OR hanger wires. Hanger wires must be wrapped tightly with 3 full wraps. The J-Bars (directional) shall intersect the U-profile at 90° at every module dictated by the panel length. The J-Bar is connected to the U

First floor

Providing and fixing Indian teak wood plank ceiling 20 millimetre thick plain underside tongued and grooved including iron screws, scaffolding, if necessary, including one primer coat on under side and one coat of coal tar on upper side etc. complete. Ground floor

First floor

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20 centimeter. to 30centimeter. thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from departmental Land)

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600millimetre diametermeter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900millimetre diametermeter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Two Track Two Glass Shutter Window : Providing and fixing aluminium color anodized system sliding window of various sizes. Window will be made from Geeta / Malwin/Lexil, 25 to 27 millimetre slim series or equivalent System. Windows will be of specially extruded aluminium 2 Track - 2 Glass shutter window/ ventilator, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with stainless steel 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 millimetre clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of Stainless steel 202. Windows will be sealed with weather sealant from outer periphery, etc. complete. as directed by engineer-in-charge.Ground floor

Three Track Two Glass + One Net Shutter Window :Providing and fixing aluminium system color anodized sliding window of various sizes. Window will be made from Geeta / Malwin/Lexil/Brandson, 25 to 27 millimetre slim series or equivalent System. Window will be of specially extruded aluminium 3Track - 2 Glass + 1 net shutter, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 millimetre clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, etc. all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete.as directed by engineer-in-charge. Ground floor

First floor

Three Track Three Glass Shutter Window : Providing and fixing aluminium system color anodized sliding window of various sizes. Window will be made from Geeta / Malwin/Lexil/Brandson, 25 to 27 millimetre slim series or equivalent System. Windows will be of specially extruded aluminium 3Track - 3 Glass shutter, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with Stainless steel 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 millimetre clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of stainless steel 202. Windows will be sealed with weather sealant from outer periphery, etc. complete. as directed by engineer-in-charge. Ground floor

Four Track Three Glass + One Net Shutter Window: Providing and Fixing Aluminium System anodized sliding windows of various sizes. Sliding will be made from Geeta / Malwin/Lexil/Brandson, 27 millimetre Slim series or equivalent system. Windows will be of specially extruded aluminium 4 Track -3 Glass + 1 net shutter with Bottom Fixed. Fixed Glass at Bottom as per drawings would be fixed on 40millimetre Casement Series Frame section and Single glass Glazing clip both having 45° Joints with special cleats and fixed to missionary by SS 202 wood screws. The Sliding Window Track mounted on Special Square Aluminium section, The track frame will be fixed to the masonry opening of windows with SS 202 wood screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 6 millimetre clear Toughened Glass. All shutters will be having 45° joints, joints will be fixed with specially developed clits to form uniform hairline joint. All Shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. Windows will be sealed with weather sealant from outer periphery,etc. all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete. Ground Floor.

First floor

Structural Glazing : Providing and fixing structural glazing work of 5millimetre tk tinted toughened glass with frame work made of aluminum RHS of size 64millimetre x 58millimetre color anodized as per design and drawing, aluminum sections should be confirming IS 63400 , glass pasted to frame work with 3M VHB tape and DOW CORNING 995 silicon sealant and gaps between glass panels should be filled by clear Dow CORNING 789 silicon weather proofing sealant , with all necessary fasteners and accessories complete.as directed by engineer-in-charge. Ground floor

First floor

Openable Shutter in Structural Glazing : Providing and fixing openable shutter in structural glazing work of 5millimetre tk tented toughened glass with frame work made of aluminum RHS of size 64millimetre x 58millimetre color anodized as per design and drawing, aluminum sections should be confirming IS 63400 , glass pasted to frame work with 3M VHB tape and DOW CORNING 995 silicon sealant and gaps between glass panels should be filled by clear Dow CORNING 789 silicon weather proofing sealant , with good quality SS friction hinges, rubber gaskets handles all necessary fasteners and accessories complete.as directed by engineer-in-charge. Ground floor

First floor

Providing and fixing glass door size 1.0meter/1.2meter x 2.7meter single leaf shutter of 12 millimetre thick toughen glass frosting and edge polish as shown in the drawings or as directed , including all necessary fittings like hydraulic patch fitting, top patch fittings, Top pivot, door handle, door lock, door stopper, door soft central 180 weather seal for door edges etc. complete as directed by Engineer -IN-Charge Ground floor

Providing and applying special luxurious stone finish coating (3 product type – 6 coat system) for exteriors and interiors. Texture midcoat incorporating natural stone granules like natural Sandstone, Granite, Limestone, Ceramic chips, natural sand etc. including grooves to be provide as per design and drawings. Apply two coats of under coat primer by roller or brush then apply masking tape to create grooves as per design and drawings. First coat of texture midcoat finish by spray gun, evenly over the entire surface. Apply second coat of texture midcoat finish by spray sprinkle method, evenly on the whole sea of the previously dried first coat. Apply two coats of top protective coat evenly on the surface including grooves with roller or brush. It should be water based and ecofriendly product including preparing the surface, scaffolding etc. complete as directed by Engineer in-charge Ground floor

First floor

Stainless Steel Railing : Providing and Fixing matt finished stainless steel (Grade 304) railing with 60 millimetre x 40 millimetre and 1.6 millimetre thick pipe as handrail at top, 40millimetre x 8millimetre vertical patti placed at 1148 millimetre center to center, 40millimetre x 8millimetre horizontal patti placed at bottom 100 millimetre above the flooring,12 millimetre diametermeter pipe placed vertically in between handrail and bottom patti at 150 millimetre centre to centre and 75millimetre centre to centre alternately as shown in the drawing. including buffing, fabricating fixtures and fastening including base or cover plate of appropriate size as directed by Engineer in charge etc. Complete. Ground floor

First floor

Providing and fixing Luxalon SL4 84R plain panel sun louvers Of approved color consisting of panel 84millimetre wide 16millimetre deep x 0.6 millimetre thick with round edges panel length up to 6 Mt coil coated on continues paint Line double baked and roll formed from enameled corrosion resistance. Aluminium Alloy AA3005 (Al. Mg.) for higher strength and good roll forming characteristics Panel shall be clipped to baked enameled aluminium SL-4 panel stringer of 33 millimetre wide and 86millimetre deep X 0.95 millimetre thick in a standard Length of 5 Mt made of double baked enameled Aluminium alloy AA5050 (Al. Mg.) black with cut-outs to hold the panel in a module of 86millimetre center to center at a distance of 1 Mt. The Carrier shall be fixed to suitable structure by means of rigid fixing details including Paint Finish : Aluminium panels shall be cromotised for maximum bond between metal and paint enameled twice under high temperature one side with full primer and luxacoat finish. The other side (Inner side) with a primer coat and skin coat on a continuous paint line etc. complete as directed by Engineer-in-charge. Ground floor

First floor

Supply and installation of Sand M or Equivalent make U shape fins 25X25millimetre of 0.5 millimetre thick panel Horizontal/Vertical with 25 millimetre clear gap for Plain exterior cladding system in akzo-nobel/Jotun powder coated on vIndian Standard Institutionble surface of panels and back powder coated in black with all the required hardware as per site. Supporting system and Panel powder coated shade is according to client complete as directed by Engineer-in-charge. First floor

Providing and Fixing Aluminium colour anodized sliding and folding door 3 shutters having special patented frame and shutter profiles.Oter frame profles being fixed to the missionary with SS-202 screw shutters having 45 degree corner joints with special cleats for linear joints having 6millimetre toughned glass are installed in the frame structure with mortise lock at opening, Top and bottom pivots for sliding,but hinges for folding operation and subsidiameterry multi point locking and pop handle for additional security,complete. as directed by engineer-in-charge. Ground floor

First floor

Providing and fixing 600x100millimetre with centre to centre spacing of 600millimetre rectangular Solid metal Fins made from 0.7millimetre GI Sheet with infill of honeycombing Foam, powder cotaed with pure polyester Matt finish exterior grade UV resistant powder coating for 10 years warranty. The fins have to withstand it's Self load and windspeed of 120kmph. The brackets 2millimetre thick have to be camouflaged in the fins to give a thorough fin height from Ground to Top floor. Brackets to be fixed to the substructure or civil work using Ceramic coated or stainless steel anchors. The fins to be connected to the brackets using wafer head stainless steel Screws. ProvIndian Standard Institutionon to be made water drainage through the fins to prevent any future rusting. The entire system has to be backed up by a structural stability report from a Chartered Engineer. Required detailed shop drawing and sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lifts etc. as directed by Engineer-In-Charge. Ground floor

First floor

Wooden finish ceramic tiles: Supplying wooden based matt finished ceramic tiles of approved colour having size 190 to 200millimetre x 1200 millimetre and 8 to 10 millimetre thick for flooring. Required sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lifts etc. as directed by Engineer-In-Charge. Ground floor

First floor

Providing and fixing Shingles roof system in four layers above the Mild Steel Fabricated structure Layer 1 - Fiber cement Texture board of 8millimetre thickness with wooden polish, Layer 2 - 50 millimetre Thick Metal sandwich insulated panel, Layer 3 - 3millimetre Thick waterproofing membrane / Roof Runner Synthetic underlayment, Layer 4 - Roofing shingles with accessories like ridge, corners, flashing, facia, capping etc. complete. as per details and drawings.as directed by engineer-in-charge. Ground floor

(Providing and fixing Eliptical perforated aluminium powder coated fins of size 400 millimetre x 50 millimetre x 1.2 millimetre thick as per drawing with engineered stiffeners to maintain the shape and strength. Fins to be fixed to the brackets (also of Aluminum box tube of 50millimetre ) using self drilling ceramic coated/SS screws. The brackets to be fixed in the civil work using M8x100millimetre Polyamide nylon anchor. The complete system has to be tested for a wind speed of 120kmph. Powder coating must have 10 years warranty of anti peeling. The fins have to be joint less. Required detailed shop drawing and sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lifts etc. as directed by Engineer-In-Charge. Ground floor

First floor

Wall cladding with Terracotta desiner jali ; Designing ,supplying and fixing of Terracotta desiner jali of Nuvocotto or Equivalent make of size having 200x200x60millimetre as per manufacturer finished with approved colour and pattern . The blocks shall be fixed by suitable system by using mortar or special ready mix mortar or adhesive per manufacturer guidelines and specifications with suitablable thickness of joining material, size and spacing to withstand the structural design criteria specified, supported or locked by beams or columns as per design height criteria of the cladding as per manufacturer technical specification, Cladding joints should be with as per design and drawings including cutting, jointing, fixing, scaffolding, cleaning, lead, lifts, handling etc. complete as shown in design, drawings and specifications as directed by engineer and In charge.Sample needs to get approved from project architect before execution of work.as directed by engineer-in-charge. Ground floor

First floor

Providing khanapuri wire cut burnt brick masnory as a claddding in cement mortar 1:4 including scaffolding raking out joints and providing grooved pointing with cement mortar 1:3 using pigment of approved shade having width and shape as per directed by engineer Incharge. Adhesive chemical should be apply back side of wall @ 4.3kg/sqm .Sample needs to be get approved from project architect before execution of work..as directed by engineer-in-charge. Ground floor

First floor

Providing and laying Heavy duty parking tiles of approved quality of size 60 centimeter x 60 centimeter, and 14millimetre to 16millimetre thickness confirming to corresponding Indiametern Standard for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.as directed by engineer-in-charge.Ground floor

Providing and laying vitrified matt finish tiles having size 300 millimetre x 600 millimetre having 8 to 10 millimetre thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:3 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.as directed by engineer-in-charge. Ground floor

First floor

Providing and laying Vitrified tiles (Matt and Antiskid finish) in floor in 800millimetre x 1200millimetre sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 millimetre thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diametermond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in-charge. Ground floor

First floor

Design, Supply Fabrication and installation of Cross Link PVDF Tensile membrane fabric type II - TX30, 1050 gsm , both side PVDF coat,Total Thickness-0.72millimetre ,Acoustic Performance-Weaking Index-13dBA-ISO717-1,Light Transmission-8% UV Transmission 0%,with tensile strength 430/ 430 daN/ 5centimeter, tear strength 30/ 28 daN as per manufacturer's specification and 20 year manufacturer warranty or equivalent. Flame Retardancy M2/NFP92-507,Including cutting, welding and cables, plates and necessary hardware for fixing the fabric as per approved shape. Membrane shall be cut and manufactured with high frequency Poly vinyl chloride welding machine, cost of all materials complete as per directions.Quality in conformity with ISO9001,Enviornmental communication in conformity with ISO14021.as directed by engineer-in-charge. First floor

Horizontal perforated Louver (Providing and fixing Horizontal louvers of 1200millimetre wide by 6200 millimetre long perforated horizontal louvers made from 1.2millimetre Aluminium sheets with perforation of 3millimetre circular holes with distance of 3millimetre from each other. The louver shall have 3 vertical supports with cantilever camouflaged brackets to support the louver. The Vertical supports shall be of pipe section of 100x50x1.2millimetre GI powder coated. The entire system shall be powder coated with Pure Polyester Matt finish UV resistant exterior grade powder coating with 10 years anti fading and peeling warranty. As directed by engineer-in-charge. Ground floor

Supply and Fixing of VM Zinc Standing Seam system in 0.7 millimetre thick having 25/430 STANDING SEAM ROOFING SYSTEM IN 0.7 millimetre thickness comprIndian Standard Institutionng of: 1) Top layer – VMZINC Quartz finish standing seam profiled roofing panels having 25 millimetre seam height and 430 millimetre panel width to be manufactured from zinc titanium alloy in 0.7 millimetre minimum thickness. Ultimate tensile strength: minimum 150 N/millimetre 2,0.2%, Proof Stress: min 100 N/millimetre 2, Modulus of elasticity: 90,000 N/millimetre 2. Panels shall be fixed to the substructure using Stainless Steel clips fixing and sliding clips of suitable height with spacing as per required wind loads parameters. The roofing sheets shall be as per EN 988 standards 2) Second Layer - Anti Abrasive breathable membrane to be laid underneath the Zinc roofing sheets. 3) Third Layer - 1.0 millimetre thick GI pieces to placed at suitable distance for fixing of special SS clips. 4) Panel Rib in Galvalume in 0.47millimetre with screws. The feed material shall be manufactured out of nominal 0.45 millimetre TCT, 240 MPa yield strength. 5) Galvanized Steel Z girt of required size and length, 1.5millimetre thickness, 240 Mpa. 6) heat / Accoustic Insulation of 50 millimetre thickness x minimum 60 Kg/m3 density. Thermal Transmittance (U-value) to be 0.26W/m2.K. Make Roxul /Rockwool Indiameter . 7) Synthetic Roof Runner Saint Gobain Vapour control underlayment OR Double sided Aluminium foil vapour control layer 170microns (VCL 170) thick water vapour resistance of 336MNs/g and water permeability of 0.61g/m2/day. 8) Panel Rib in Galvalume in 0.47millimetre with screws. The feed material shall be manufactured out of nominal 0.45 millimetre TCT, 240 MPa yield strength.as directed by engineer-in-charge.Ground floor

First floor

Zinc Flashings - Supply and Installation of VMZINC Quartz plus finish flashing having 0.7millimetre thickness. Flashing to be installed for drip, eaves, gables, ridges etc. as required for site detailing. (Girth of the Flashing should be up to 250 millimetre )as directed by engineer-in-charge. Ground floor

First floor

Providing and fixing of Double skin insulated gutter of 2 millimetre thickness Aluminium gutter, GRADE AA 1100 ALLOY with EPDM Expansion joints for every 12 metre length (if required), aluminum Down take spout diameter 150 millimetre at every 10 metre gutter length, and other accessories and welding at joints. The Girth of gutter would be maximum 1200millimetre . With bare galvalume bottom sheet 0.47 millimetre thick, Rockwool insulation 50 millimetre thick and 60 kilogramme per cubic metre density, vapour control layer - VCL 170, and z-girt galvanised steel 1.5millimetre thick.as directed by engineer-in-charge. Ground floor

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 millimetre thick stone slab laid over 20 millimetre (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kilogramme per square metre including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 millimetre thick Italian Marble stone slab, Perlato, Rosso verona,Fire Red or Dark Emperadore etc. as directed by engineer-in-charge. Ground floor

First floor

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc. , in required design and pattern wherever required, stones of different finished surface texture, on 12 millimetre (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 millimetre thick Italian Marble stone slab,Perlato, Rosso verona,Fire Red or Dark Emperadore etc. as directed by engineer-in-charge. Ground floor

Providing and laying Vitrified tiles (Matt and Antiskid Finish) in floor in 600 millimetre x 1200 millimetre sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 millimetre thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry at 3.3 kilogramme per square metre including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diametermond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in-charge. Ground floor

First floor

Providing and laying wooden based matt finished Vitrified tiles of approved colour having size 190 to 200 millimetre x 1200 millimetre and 8 to 10 millimetre thick for flooring. Required sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lifts etc. as directed by Engineer-In-Charge. Ground floor

First floor

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 millimetre thick, decorative types, of exterior grade, as per detailed drawings, conforming to Indiametern Standard:2202 - 1962 (Revised) with approved face Laminate on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter.as directed by engineer-in-charge. Ground floor

First floor

Providing and fixing 12 millimetre thick toughen glass and edge polish as shown in the drawings or as directed, including all necessary fittings like Upper glazing profile, bottom locking glazing profile, standard gasket for profile, locking Gasket 12millimetre , door soft central 180 weather seal for glass edges as per drawings having glass fixing sections at all sides concealed in partitions etc. complete as directed by Engineer -IN-Charge. gaps between glass panels should be filled by clear silicon weather proofing sealant , EPDM gaskets, handles all necessary fasteners and accessories complete.as directed by engineer-in-charge. Ground floor

Providing, fixing, testing and commissioning of turbo ventilators of approved make of size 24" self propelled fans having stainless steel 430 grade body with approximate weight 4.85 Kg., having a CFM-7KM per hours-2440 with blade length 360 millimetre wings of 80 millimetre . including cutting roofing sheet,making the joints water tight,including all quality fastenings,fixing with self tapping screws from Buildtex, internal butt strap inlayed gasket,metal washers and Neoprene/EPDM washers,scaffoldings etc. complete. Location of Turbo vent as per drawing etc. complete. (Turbo vent should be Self-lubricating bearing) .as directed by engineer-in-charge.First floor

Providing and fixing of Rubber Matting 8 millimetre thick of roll or approved design fixing with adhesive solution, including transportation,loading, and unloading, all necessary arrangement, tools,plants,machinery other fixtures and fasteners etc. complete as per details and directed by Engineer-in- Charge, including all taxes, transportation, loading and unloading etc. complete as directed by Engineer-in- Charge (Rate is inclusive of all other taxes,Excluding GST)as directed by engineer-in-charge. Ground floor

First floor

Providing and fixing European type wall hung white water closet of Parriware / Hindware with push valve concealed type with cover plate 32millimetre size of including soil pipe, vent pipe upto outside face of wall, 100millimetre diameter Galvanised Iron plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete. Ground Floor

First Floor

Providing and fixing Orissa Pan of size 580 x 445 x 260 millimetre with approved make flush valve including trap, Cast Iron.soil and vent pipe up to outside face of wall including 100millimetre diameter. Cast Iron. plug bend and necessary pipe connection, etc. complete. As directed by Engineer in charge. Ground Floor

First Floor

Providing and fixing white vitreous china water less urinal of size 600 x 330 x 315 millimetre having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal.etc. complete. Ground Floor

First Floor

Providing and fixing Table top white wash basin of size 120 x 635 x 405 millimetre rubber plug sand brass chain, with pillar cock, Chromium Plated Angular stopcock long thread, continental including S.S.bottle trap of approved make having necessary pipe connection upto the outside face of the wall. etc. complete as directed by Engineer in charge Ground Floor

First Floor

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 millimetre size with pillar cock, Chromium Plated Angular stop cock, long thread of approved make continental including stainless steel bottle trap of necessary pipe connection upto the outside face of the wall, having Telephonic Black/Colour Granite of 180 millimetre thick fixed on Black Kadappa Framework, etc. ement Concreteomplete as directed by Engineer in charge. Ground Floor

First Floor

Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Ground Floor

First Floor

Providing and fixing Chromium Plated wall mixer with provison for overhead shower with 115 millimetre long bend pipe and wall flange of approved make including necessary sockets/union nut etc. ement Concreteomplete. Spec : As directed by Engineer in charge Ground Floor

First Floor

Providing and fixing Shower Head, with shower arm of approved make mixer of including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge. Ground Floor

First Floor

Providing and fixing Chromium Plated BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Ground Floor

First Floor

Providing and fixing Chromium Plated sink cock with raised J" shaped swinging casted spout of approved make including necessary sockets/ union nut etc. complete."Spec No: As directed by Engineer in charge Ground Floor

First Floor

Providing and fixing Chromium PlatedTwo way BIB cock of approved make continental including necessary sockets/union nut etc. complete. Ground Floor

First Floor

Providing and fixing Hand shower (health faucet) with 8millimetre diameter. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Ground Floor

First Floor

Providing and fixing following diameter Poly vinyl chloride pipe of 40 millimetre diamete,. 10 kilogramme per centimeter2 pressure (Class IV) with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete. Ground Floor

First Floor

Providing and fixing 75 millimetre diameter stabiliser pipe/ Poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Ground Floor

First Floor

Providing and fixing 100 millimetre diameter stabiliser pipe/ Poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Ground Floor

First Floor

Providing and fixing following diameter Poly vinyl chloride pipe of 75 millimetre diameter. 4 kg/centimeter2 pressure (Class IV) with necessary fixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete. Spec.: As directed by Engineer-in-charge. Ground Floor

Providing and fixing Poly vinyl chloride Rain water pipes of 110 millimetre outer diametermeter and having wall thickness of 2.2 to 2.7 millimetre confirming to Indiametern Standard 13592-1992 including proper rainwater receiving recess with Poly vinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40millimetre from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete. or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly vinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Ground Floor

First Floor

Terrace Floor

Providing and fixing Poly vinyl chloride Rain water pipes of 160 millimetre outer diametermeter and having wall thickness of 2.2 to 2.7 millimetre confirming to Indiametern Standard 13592-1992 including proper rainwater receiving recess with Poly vinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25millimetre to 40millimetre from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly vinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Ground Floor

First Floor

Providing and fixing 15 centimeter rigid Poly vinyl chloride Nahani trap including Poly vinyl chloride grating ,bend,connectingpiece of UPoly vinyl chloride pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)Ground Floor

First Floor

Providing and fixing 15 centimeter x 10 centimeter salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and fixing intercepting sewer trap including concrete bedding, etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 60 centimeter x 45 centimeter x 90 centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round glazed stoneware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140 Kilogramme with frame etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 90 centimeter x 45 centimeter x 90 centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round glazed stoneware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140 Kilogram with frame etc. complete.

RWH - Recharge Pit Providing and constructing recharge pit of 2.0 metre deep and 1.0 metre diameter of pre-cast Reinforced Cement Concrete rings with 6.5' diameter x 25 metre deep borewell at the floor of recharge pit including installation of combination of solid/perforated Poly vinyl chloride casing pipe wrapped around with netlon mesh including 300millimetre thick sidefilling around outside of Reinforced Cement Concrete rings (annular space) with 40millimetre size boulders including filling of recharge pit up to 0.5 metre depth with 25-75 millimetre clean washed gravels from bottom up followed by 0.5 metre depth of 10-25millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate (natural sand/crushed sand Vertical shaft impact (VSI) grade finely washed etc. ) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand Vertical shaft impact (VSI) grade finely washed etc. ) mediameter layer including covering with Reinforced Cement Concrete slab, manhole frame and cover, Poly vinyl chloride rungs, Poly vinyl chloride end-caps, fittings etc. including arrangement for inlet and outlet pipe excavation and backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Providing and fixing on walls/ceiling/floor 20 millimetre diameter Chlorinated Poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed etc. complete. Ground Floor

First Floor

Terrace Floor

Providing and fixing on walls /ceiling / floor 25 millimetre diameter. Chlorinated Poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed etc. complete. Ground Floor

First Floor

Terrace Floor

Providing and fixing on walls/ceiling/floor 32 millimetre diameter. Chlorinated Poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed etc. complete. Ground Floor

First Floor

Terrace Floor

Providing and fixing on walls/ceiling/floor 40 millimetre diameter. Chlorinated Poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed etc. complete. Ground Floor

First Floor

Terrace Floor

Providing and fixing on walls/ceiling/floor 50 millimetre diameter. Chlorinated Poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed etc. complete. Ground Floor

First Floor

Terrace Floor

Providing and fixing of 20 millimetre diameter Non return Valve of brass including necessary sockets / unions, nut, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use) Ground Floor

First Floor

Providing and fixing 50 millimetre diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber]

Providing and making Indian Standard Institution Mark ferrule connection of 50 millimetre diameter. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.

Providing and fixing of 80 millimetre diameter strainer including necessary sockets / unions, nut, testing etc. complete.

Providing and fixing of 100 millimetre diameter strainer including necessary sockets / unions, nut, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use)

Providing and fixing high density polythein container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity 1000 liters x 65 numbers.

Providing and fixing high density polythein container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 10000 x 6 numbers.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 150 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 200 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 250 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 300 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 450 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 600 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 800 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 900 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 1000 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and Lowering, laying Indian Standard Institution standard Reinforced Cement Concrete pipes in standard lengths of NP-II class of 1200 millimetre diametermeter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete.

Providing and constructing on sewer, Burnt Brick masonry circular manhole with concentric cone 1.2 M diameter. at bottom and 0.5 M diameter. at top and upto a depth of 2.00 M with 23 centimeter brick work in centimeter 1:4 proportion excluding excavation including foundation concrete 250 millimetre thick and haunches and channels in Cement Concrete. 1:2:4 proportion, finishing channels in smooth rendering, providing Cast Iron. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality FRP (Fibre-reinforced plastic). frame and cover of 56 centimeter diameter.etc. complete as directed by Engineerin-charge.

Providing and constructing on sewer, Burnt Brick masonry circular manhole concentric cone 1.5 M diameter. at bottom and 0.5 M diameter. at top and upto a depth of 5.00 M with 23 centimeter brick work, upto depth of 2 M from top and 35 centimeter thick brick work for balance depth in centimeter 1:4 proportion with 20 millimetre thick smooth plaster on both sides in centimeter 1:2 proportion excluding excavation including foundation concrete 250 millimetre thick and haunches and channels in Cement Concrete. 1:2:4 proportion, finishing channels in smooth rendering, providing Cast Iron. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality FRP (Fibre-reinforced plastic) frame and cover of 56 centimeter diameter. etc. complete as directed by Engineerin-charge.

Providing and lowering double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI and GOM in all respect etc. complete. Sluice valve - PN - 1.6 (Without by pass arrangement) 50 millimetre diameter.

65 millimetre diameter.

80 millimetre diameter.

100 millimetre diameter.

150 millimetre diameter.

Providing and supplying 50 millimetre diametermeter Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI and GOM in all respect etc. complete. Air Valve Double Ball Flanged Type - PN - 1.6

Designing (aesthetically), and constructing Reinforced Cement Concrete ground service reservoirs / Reinforced Cement Concrete sumps in Mix-30 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top Reinforced Cement Concrete roof slab / or dome, 20 millimetre thick cement plaster with water proofing compound in centimeter 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bypass arrangement consisting of Cast Iron. Mild Steel D/F. pipes, specials and valves of given diameter , providing and fixing accessories such as Mild Steel ladder inside and outside, Cast Iron. Manhole frame and cover, water top slab, Burnt Brick masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti-termite treatment shall be given for underground portion of the structure. Note:- "The design shall be in accordance with various relevant Indiametern Standard specification (Indiametern Standard 456/1978, Indiametern Standard 875 - 1987, Indiametern Standard 3370 - 1965 or revised.)" Only Mild Steel bars grade I conforming to Indiametern Standard 432 part-I or high yield strength deformed bars conforming to Indiametern Standard 1786 or Indiametern Standard 1139 shall be used. Grade -II Mild Steel bars shall not be used. Entire structure shall be in M-30 only. The scope of pipe assembly work shall be upto 5 metre beyond outside face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. The G.S.R. / Sump above 15 lakh litres capacity shall be in two compartment. The Job includes designing the structure for uplift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by Engineer-in-charge. If uplifts considered in design, then these rates shall be increased by 7.5%. G.S.R. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. Sump well includes cost of suction pit required at bottom. For pipe diameter upto 300 millimetre only cast iron pipes and cast iron specials shall be used. For pipe diameter above 300 millimetre , Mild Steel pipes and specials minimum 10 millimetre thick shall be used with proper anticorrosive epoxy treatment from inside and outside. Cost of pump house is not included in these rates. Above rates are applicable for Seismic Zones 2, 3 and 4. 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of G.S.R.s and sumps till satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. Comillimetre on water tank Capacity : 600000 lits

Fire tank for Academic Block Capacity : 150000 lits

Fire tank for Convension center Capacity : 150000 lits

Designing (aesthetically), providing, fabricating Package Water Treatment Plant at the shop, transporting to site, installing, testing and comillimetre issioning at the site, giving necessary one month's free test and trail run with guarantee for one year, etc. complete. Prefabricated Package Water Treatment Plant comprIndian Standard Institutionng following : Rapid mixing channel in Mild Steel sheets and Mild Steel baffle. Flocculator not less than 10 minutes detention, in Mild Steel prefabricated box, flocculation being achieved either by glass pebbles of graded size or Poly vinyl chloride tetrapod or equivalent arrangement to ensure good floc formation. Plate or tube settlers of not less than 30 minutes detention in Mild Steel prefabricated box, the plates / tubes mounted in the settler basin with inclination of not less than 60 degree to horizontal. Rapid sand gravity filter in Mild Steel prefabricated box with filter sand not less than 500 millimetre thick, supported on false floor below with polypropylene nozzles spaced at not more than 500 millimetre centres in either direction. Backwashing, inlet facilities only shall be provided. Department shall provide either ESR giving 8 to 10 Metre head at filter nozzles or backwash pump, having flow rate of 0.6 Cum per minute per square metre of filter bed. (Limit upto 5.0 Metre from W.T.P. face ) All civil works for foundation, consisting of raised Reinforced Cement Concrete platform above G.L. or walls in Burnt Brick masonry or UCR masonry shall be provided as per needs at site. Bypass in the form of pipes or Mild Steel channels included in the design, effecting bypass of such new tank and filter individually or both. (Limit upto 5.0 M. from W.T.P. face) The entire Mild Steel fabricated tank provided with FRP lining (5 millimetre thick) to inside face in contact with water epoxy painting- two coats with one coat of primer on outside. The thickness of plates employed shall not be less than 6 millimetre Alum dosing and mixing arrangements to be provided in twin tanks, each of 8 hours capacity, capable of importing does of 20 ppm with 5% solution. The alum tanks provided with a dose in steps of 5 ppm and entire unit mounted on the top of flocculator / settler box, in the form of prefabricated structure, with access platform and ladder. Alum boxes with FRP lining (5 millimetre thick) inside and epoxy paint two coats with one coat of primer on outside. Both flocculator and settling basins provided with hopper bottom with slope not less than 45 degrees to the horizontal drain pipes and valves provided to both flocculator and settling basin. Flow ratings to conform following parameters : a) Velocities in channels not to exceed 0.6 M./Second. b) Velocities in filter outlet pipes and valves not to exceed 1 M./Second. c) Velocities in interconnecting pipe and controls not to exceed 1M./Second. d) Backwash with air : Not required. e) Backwash with water : Not less than 0.6 M./ Sqm. of filter bed area in filter box. Free board for all units not less than 300 millimetre Rates as above include all taxes, octroi and duties which would be specific to the site locations. Package Water Treatment Plant 21 Cum/Hr. (0.50 MLD)

Designing (aesthetically), providing, constructing and giving satisfactory hydraulic testing, commissioning and giving satisfactory trials of modernised Sewage Treatment Plant consisting of inlet chamber, screen chamber, detritus tanks, parshall flume, primary settling tanks, aeration tanks, secondary settling tanks, sludge sump and pump house, sludge thickener, primary digester, secondary digester, SST sump and pump house, chlorine contact tank, chlorinators, chlorinator room, sump cum blending tank, PST sludge sump cum blending tank, pump house, sludge centrifuge, gas holder, necessary piping work with required valves, gates, drains, pathways, administrative building cum laboratory, laboratory equipments, tools and plants, spare parts, etc. complete as turnkey job with all involved civil, electrical and mechanical works inclusive of following items, units as per detailed specification for civil, electrical and mechanical components with all duties and taxes, etc. complete. "Inlet Chamber Designing, providing and constructing Reinforced Cement Concrete (M-30) inlet chamber designed for the peak flow 2 DWF including necessary excavation in all types of strata including walkway around the periphery. Each compartment will have phosphor bronze, steel gate with extension rod, head stock, operating wheel, Galvanised Iron pipe railing, etc. The work includes providing and making necessary arrangements to connect the flow to screen chamber by approach channel as directed and as per specifications." "Screen Chambers Designing, providing, constructing, testing and comillimetre issioning screen chamber designed for average 1 DWF and maximum 2 DWF in Reinforced Cement Concrete (M-30) including inlet pipe/ channel from inlet chamber, outlet pipe/ channel to detritus tank, free board of 0.50 M minimum, Reinforced Cement Concrete walkway 1.2 M wide with Galvanised Iron pipe railing, Reinforced Cement Concrete staircase of 1.2 M width from GL to screen chamber." "Detritus Tank Designing, providing and constructing continuously grit removal type of detritus tank, mechanically operated in Reinforced Cement Concrete (M-30 capable of removing 100%, 0.20 millimetre size particle and above, having specific gravity 2.30 designed for one peak 2 DWF with suitable arrangement of separation of grit from putrescible solids including providing and making necessary arrangement of JB-1 inlet and outlet channel of required sizes as may be required to connect the flow to parshall flume, etc. complete including hydraulic testing for water tightness of the structure having minimum free board of 0.30 M washout arrangement to grit chamber and platform 1.20 M wide Reinforced Cement Concrete walkway with Galvanised Iron pipe hand railing shall be provided. A pit for collecting grit conveyed by conveyor shall be provided. It should be suitable to handle the grit for carting. All arrangements shall be as per detailed specifications and as directed." "Parshall Flume Designing, providing and constructing parshall flume channel in Reinforced Cement Concrete (M-30) for measuring quantity of sewage received at the treatment works, max. flow of 2 DWF and minimum flow of % DWF including providing and making necessary arrangement of approach channel as may be required to connect the flow having minimum velocity of 0.3 M per second to distribution box (DB-1). The unit shall be provided with walkway and Reinforced Cement Concrete staircase having width of 1.20 M each etc. complete, including hydraulic testing for watertightness of the civil structure having free board of 0.6 M including electrically operated, flow indicating and flow integrating devices having a standby of float operated ROF meter. All arrangements as per specifications." "Primary Settling Tanks with Equipments Designing, providing, constructing and hydraulic testing in Reinforced Cement Concrete (M-30) watertight primary settling tanks of 1 DWF capacity with feed chamber, sludge and effluent chamber, base adequately supported, providing 1.20 M wide clear peripheral and approach walkway inter connecting Cast Iron. double flanged pipes from feed chamber of the clarifier distribution well, grouting wherever necessary, including foundation, etc. as per specifications, water depth at outer side shall be minimum 3.0 M, weir loading shall not be greater than 125 cum, DWF for average flow, bottom slope shall be 1:12." The floor of clarifier shall have 40 millimetre thick (min.)screed course of cement grout of mix in centimeter 1:2 detention period shall be 2.25 hrs. dispersion box and stiffened weir plate made of mild steel plate not less than 8 millimetre thick, anticorrosive epoxy paint on both faces shall be provided. Minimum free board of 0.50 M be provided. It includes inlet pipe from distribution chamber, central shaft, inlet baffle, outlet chamber, scum remover, skimillimetre ing device, scum chamber, connecting channel from PST, outlet chamber to DB-2 as per detailed specifications. "Aeration Tank (AT) Designing, providing and constructing in Reinforced Cement Concrete mix (M-30) aeration tank in compartments to handle combined flow of 1 DWF incoming flow and recirculation flow including construction of inlet, outlet and distribution chamber DB-3 and providing 1.20 m wide clear peripheral approach walkways, expansion joints wherever necessary, including foundation, etc. as per specifications. Peak factor shall be 2, F/M ratio shall be 0.40, low speed aerator speed between 20 to 100 RPM, recirculation flow @50% and free board 0.60 m depth, (SWD) 3.50 M minimum, D.O. level at A.T. 2 mg/lit, MLVSS concentration shall be 2500 mg/lit and MLVSS concentration shall be 2000 mg/lit, HRT shall be 4 to 6 hours and STR 6- 8 days." It should have compartments for washing, oxygen transfer capacity of mechanical aerator shall not be less than 1.5 kg/KWH, BOD of effluent 20 mg/lit with input to aerator 0.15 to 0.30 KWH/1000 cum of aeration tank. All related works shall be as per detailed specifications. "Secondary Settling Tanks with Equipments Designing, providing and constructing in Reinforced Cement Concrete (M-30) water tight secondary settling tank having detention period 2 hours and SWD shall be 4.20 M. The effluent BOD and SS from the secondary clarifier shall not be more than 20 Mg/lit and 30 Mg/lit respectively. It should be hydraulically tested, bottom floor slope of 1:12 and free board of 0.60 M minimum. Dispersion box shall be made of mild steel plate not less than 8 millimetre thick with anticorrosive epoxy paint from both faces and well stiffened. The sewage admitted at the centre flowing upward and outward towards periphery be slowly and continuously collected towards a convenient discharge point near centre by a rotating wheel arm. The clarifier will be completed with end drive half rotating bridge, structural steel rake, overflow weir, walkway diffuser, over load alarms, having push buttons, starters for the clarifier, walkway and the suitable sludge withdrawing arrangement with flush valve capable of withdrawing moisture content not more than 97% to 98% slopping floor shall have 40 millimetre thickness (minimum), screed course of cement grout of mix 1 cement : 2" "Sludge Thickener with Equipments Designing, providing and constructing watertight of sludge thickener (gravity type) including foundation in Reinforced Cement Concrete (M300) with inlet and outlet chamber influent well, inlet and outlet pipes, with sludge pit and sludge removal arrangement, grouting wherever necessary with walkway all around of 1.20 M width Galvanised Iron pipe railing interconnecting CI pipes all complete as per specifications, detention time 24 hours. SWD shall be 4.25 metre with necessary fixed bridge scraper arrangement as per detailed specifications and necessary inlet and outlet arrangement. All other arrangement as per detailed specifications." "Primary Digester with Mixer Equipment (Fixed Cover) Designing, providing and constructing unit of watertight and gastight primary digester suitable for 1 DWF plant and complete with pipe gallery, building, staircase for access from dome of digester into inside staircase, walkways at springing levels, etc. walls and base slab being in Reinforced Cement Concrete (M-30), domes in structural concrete including providing burners and civil works for gas collection, grouting wherever necessary, etc. complete as per specifications. It should be designed for min 9°C and max. 45°C and minimum detention time of 30 days, water depth shall not be more than 8.5 M, free board shall be 0.6 M with inlet and outlet arrangement of Cast Iron. flanged pipes including giving hydraulic testing and airtightness testing. The item includes providing works for collecting gas and gas burner as per specifications." Secondary Digester with Equipment (Fixed Cover) Designing, providing and constructing including foundation unit of watertight and gastight secondary digester to deal with 1 DWF complete with pipe gallery, building, staircase for access from dome of digester into inside, staircase to walkways at springing levels, etc. Walls and base slab and domes being in Reinforced Cement Concrete M-30, providing arrangement for digested sludge from digesters to centrifuge, providing burners and civil works for gas collection grouting wherever necessary, etc. complete as per specifications and obligatory provIndian Standard Institutionon. All other arrangements as per detailed specifications. S.S.T. Sump and Pump House with Recirculation Pumps and Sludge Pumps to Digester Designing, providing and constructing sump and pump house of requIndian Standard Institutionte capacity with ceiling height not less than 6 M, sludge stream for recirculation to aeration tank and excess sludge to SCBT, including Cast Iron. piping to carry this flow to sump as per detailed specification and as directed by Engineer-in-charge. "Chlorine Contact Tank Designing, providing and constructing chlorine contact chamber of adequate capacity to deal with 1 DWF average flow. The chlorine contact tank should be of 30 minutes capacity during average flow to achieve 99.99% coliform reduction. Chlorine dose shall be maintained as per standard provIndian Standard Institutionons including designing, providing and constructing water supply arrangement for chlorination including providing dewatering and bypass arrangements, jointing to final effluent main and outlet weir, etc. complete. The effluent quality should match with the standards laid down by Maharashtra Water Pollution Control Board and as per the obligatory provIndian Standard Institutionons and detailed specifications and as directed by Engineer-incharge" "Chlorinator and Chlorinator Room / Tonner Room Designing, providing and constructing chlorinators, vacuum type 2 nos. each having capacity of 10 Kg/hr as per obligatory provIndian Standard Institutionons and detailed specifications with necessary provIndian Standard Institutionon of chlorinator room having floor area not less than 30 sqm including automatic residual chlorine controller with actuator and residual chlorine analyser including cost of chlorine cylinder, piping, valves, measuring and controlling equipments, safety devices, lifting equipments, etc. complete as per Indiametern Standard-10553 (Part II) 1982. The tonner room should have 3 MT capacity crane for loading and unloading facility. Tonner storage should distinctly isolated and should be for minimum 10 tonners space and arrangements as per gas laws 1981 and factory act shall be provided and all other matching amenities be provided, 5 MT gantry shall be provided for full length of tonner room at 6 M height from floor level, with outlet chamber and treated effluent outlet channel, etc. complete as per detailed specifications." "Sump cum Blending Tank (SCBT) Designing, providing and constructing sump cum blending tank of appropriate size and detention time with free board of 0.60 M. The slope of floor 1:4 with suction pit at the centre as per detailed specifications and obligatory requirements." "P.S.T. Sump cum Blending Tank, Pump House with Recirculation Pumps Designing, providing and constructing pump house of appropriate size with pumps, ceiling height minimum 6 M over the circular sump for discharging the sludge to thickener and recycling of flow for blending with Cast Iron. piping, etc. complete as per detailed specifications." "Sludge Centrifuge Room with Centrifuges Designing, providing, constructing and installing including foundation, etc. sludge centrifuge to handle the sludge flow of one day in one hour per unit with sludge dewatering unit, drain, etc. complete as per specifications, sludge centrifuge with all necessary arrangements as per detailed specifications mentioned in Volume-II and Volume-III of tender and obligatory provIndian Standard Institutionons, be provided with satisfactory functioning." "Gas Holder Designing, providing and constructing gas holder having gas collection system, gas flow meter and gas burner with floating dome arrangement and storage time 6 hrs. to be constructed in M-30 having appropriate diametermeter as per detailed specifications and obligatory provIndian Standard Institutionons. The floating dome shall be of 8 millimetre thick Mild Steel plate minimum and shall be provided with two coats of anticorrosive epoxy coating from both faces." "Outfall Sewer Designing, providing and constructing appropriate outfall sewer of Reinforced Cement Concrete NP-2 pipe to discharge treated effluent, untreated effluent from outlet chamber (after basin / chlorination tank) to the local nalla at a point shown on the drawing including necessary chambers for inspection / cleaning including necessary excavation , dewatering, refilling, concrete encasing/ bedding concrete steps to reach the nalla bed level, pitching and energy dissipation chamber in the nalla portion, etc. complete upto 50 M length Reinforced Cement Concrete NP-2 pipeline and including all above items." Piping Work in CI 'LA' class including Sluice Valve, Reflux Valve, Mild Steel Gate Providing, laying and jointing pipes other than those already included in the above items for interconnection bypass drains, etc. of all units including adequate numbers of manhole chambers. The item includes excavations, refilling and hydraulic testing of pipes, valves, gates, accessories and cost of jointing materials. The item includes required channels with gates for interconnection of units, bypass drains, etc. for all units and as directed, etc. complete as per detailed specifications. "Administrative Building cum Laboratory (G+1) Designing, providing and constructing administrative building, office cum laboratory including stores. This shall be a building having appropriate carpet area at ground floor and at first floor complete as per specifications including necessary excavation, foundation in Reinforced Cement Concrete M-200 framed structure, BB masonry (IInd class in centimeter 1:6) 20 millimetre cement plaster in centimeter 1:3 inside and outside painting, aluminium door and window with glass panels, mosaic tile flooring and skirting and all other allied items, fixtures, fastening electrification arrangements, water supply arrangement, etc. complete. The building will have laboratory on upper floor of administrative building and should be so centralised that it should not be attached with any unit but should have complete control of every unit as per laboratory equipment, beautification, telephone and intercom arrangement and wireless system." Primary and secondary treatment-with digesters, sludge drying beds, etc. complete. 260 Cum/day. (0.26 MLD)

Designing (aesthetically), and constructing Reinforced Cement Concrete elevated service reservoirs of following capacity with Reinforced Cement Concrete staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as Mild Steel ladder, Cast Iron. manhole frame and covers, water level indicators, lightening conductor, Galvanised Iron pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, Mild Steel grill gate of 2 M height with locking arrangement of approved design, Burnt Brick masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per Indiametern Standard code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. Notes The design of the structure be in accordance with relevant Indiametern Standard specification (Indiametern Standard 3370 - 1965 or revised.) The design shall satisfy the stipulations as per Indiametern Standard 1893 - 1984 and Indiametern Standard 13920 / 1993 for seismic force and Indiametern Standard - 11682 / 1985 for Reinforced Cement Concrete staging of overhead tanks. For design having more than 6 columns, provIndian Standard Institutionon of internal bracing is obligatory. External bracings is also obligatory. The entire structure shall be in M-30 mix only. Plain round mild steel bars grade-I conforming to Indiametern Standard 432 part-I or high yield strength deformed bars conforming to Indiametern Standard 1786 or Indiametern Standard 1139 shall be used, grade-II mild steel bars will not be allowed. Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level These rates include providing Mild Steel ladder for E.S.R.s upto 2 lakh litres capacity and providing spiral staircase for E.S.R. above 2 lakh litres capacity. Staging shall have to be designed with stresses of M-200 concrete for ESR. However all Reinforced Cement Concrete construction should be done in M-30. These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is stretc. h at shallow depth, extra provIndian Standard Institutionon of dewatering shall be made as per site condition. All conditions given in the Member Secretary's Circular No. MJP / TS-I / 350 / 1668 dt. 2-8-97 and MJP / S-I / 350 / 2127 dt. 13-7-99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. 75% part rate shall be payable for reinforcement concrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. ESR of 1,00,000 litres capacity (21 M Staging Height)

Supplying and erecting submersible pumpset of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 millimetre diameter. borewell suitable for 100 to 350 LPM discharge at 67 to 36 m head and (max. efficiency at 57 m head and 250 lpm) discharge and delivery pipe of Size-50 millimetre diametermeter with a necessary H type clamps as per specification no. WP-SMP

Supply, installation, testing and Comillimetre issioning of Below ground HDPE MOC ready made Oil and Grease Trap with integrated sludge trap of flow 10 LPS, including costruction of required chambers, etc. with all required accessories and jointing material etc. as directed by Engineer-In-Charge.

Providing and supplying Indian Standard Institution mark ball valves and of following diameter including all taxes (Central and local), railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto store unloading stacking etc. complete. 20 millimetre diameter

25 millimetre diameter

32 millimetre diameter

40 millimetre diameter

50 millimetre diameter

Providing and fixing on walls/ ceiling / floors/ underground, medium grade having embossed Indian Standard Institution mark of below diametermeter ASTM uPoly vinyl chloride SCHEDULE 80 pipes with screwed sockets and brackets, joints and necessary fittings such as socket's back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs etc. and remaking good the demolished portion to restore the same in original condition neatly, testing etc. complete. 50 millimetre diameter .

65 millimetre diameter.

80 millimetre diameter .

100 millimetre diameter .

150 millimetre diameter .

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying & erecting jelly filled unarmoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & installing HDMI cable low voltage gradeas per specification as per specifications having 25 mtrcord length with male/female 19pin HDMI connectors as per requirements complete.

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification NoWG-COC/NC

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports 10/100/1000Mbps unmanaged gigabit PoE Switch complete.

Supplying and erecting square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 22 mm complete.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm

Supplying, installing, testing and commissioning of 120 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SWSWR/ MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 poles/ 8 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

"Supply, installation, testing & commissioning of Main LT Panel of Acedamic Block as per Specification The panel shall be fabricated out of 14 swg CRCA SHEET STEEL and surface treated with phosphating seven tank process and duly powder coated with RAL 7032 or any approved color. LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz for Incomer & Outgoing Indication lamps for all incoming feeders for phase identifications and for indication of Switch status. 415V, 400A, Aluminium busbars (91E electrical grade). Self-locking arrangement with keys in duplicate, made of brass duly erected, flush with surface of panel. IS/IEC 61439 Main LT Panel I/O - 4P 200 Amp MCCB 25 kA (Ics=100% of Icu) – 2 Nos. 200 A Onload FP chageover switch -1 No. O/G - 40-63A TPN MCB – 15 Nos.

Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x0.315 cm complete with all materials, testing & recording theresults as per specification no. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11kV

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of fire service main single stage pump, of 1800 LPM at 76 m head centrifugal type, 50 HP (37 kW), 3 phase, 415 volt, 50Hz or of suitable HP complete as per specification no. FF-MFP/SSC

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of jockey pump of 240 LPM at 56 m head, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FFMFP/ JP

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 180 LPM at 40 m Head, 5 HP (3.75 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FFMFP/ BP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-P

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FFVL/ELS

Supplying and erecting cast iron foot valve ball type/flap type of size 150 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting cast iron foot valve ball type/flap type of size 200 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting cast iron double flange sluice valve 100mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 150mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 200 mm dia. complete as per specification no. FF-VL/SV(13-6-12)

Supplying & erecting cast iron double flange butterfly valve of size 80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 80 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Supplying & erecting gun metal gate valve of size 25 mm dia complete as per specification no. FF-VL/GV

Supplying & installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying & erecting gun metal gate valve of size 50 mm dia complete as per specification no. FF-VL/GV

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying & erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FFFFA/ARV

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.)made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FFFAS/HD

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD

Supplying, installing, testing and commissioning of manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning of hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning of FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of 3 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

SITC of Light Fixture as follows 30W LED HANGING LINEAR LIGHT FIXTURE, MATERIAL ; ALUMINIUM & PC, LED : BRIDGELUX, CRI : 80, COLOR TEMP. ; 4000K, LUMENS; 3300lm, EFFICACY: 110lm/W, BEAM ANGLE: 110°, IP RATING : IP20, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% , PF not less than 0.95 DIMENSION : 1000mm X 50mm X 70mm

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 32 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. (3 years warranty)

SITC of 42" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 20W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

SITC of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. 50 HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, cou ling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head 50 HP

Supply of emergency start / stop push button station weather proof type for Booster pump at terrace level & at Reception.

Supplying, installing, testing, and commissioning of self Luminous Exit Sign in accordance with BS5499as per sample approved by incharge (FIRE EXIT 300mm X 150mm)

SITC of Amplifier 240 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

SITC of Mixture amplifier compitable with USB, Bluetooth device of 240 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

SITC of 6 Zone Controller compitable with Built-in message manager and 240 W amplifier, having Six‑zone outputs, 6 emergency and 6 business triggers for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

Supplying, erecting, testing and commissioning celling mounted 6 Watts speaker complete as per specification

SITC of smart Board with inbuilt speaker and Desktop Operating system Keyboard Mouse along with 75 INCH 4k,350 nits, of foolowing Specification Display Size - 1722 x 1241 x 38mm, Display Ration - 4:3, Toll bar at Two sides having 18 buttons each side, Infrared Touch Technology having responce object as Fingers, Pen and any Opeque Objects. 10 Points inputs, Resolution - 32768 x 32768, having 1.5mm coordinate accuracy, 5mm Responce size, Cursur speed 180 d/s, Respond speed < 20ms , System support for 7/8/10th gen windows, Linux, Ubantu 14.04/15.04, Android 4 and up, Mac 10.5, 8GB+128GB SSD with wall mount kit.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. ( Mains - 4995 + CCTV - 5750 + PA System - 1500)

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for 2 Way light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW 3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of point wiring.

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying & erecting jelly filled unarmoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & installing HDMI cable low voltage gradeas per specification as per specifications having 25 mtrcord length with male/female 19pin HDMI connectors as per requirements complete.

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification NoWG-COC/NC ( Mains - 564 + CCTV -6000

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports 10/100/1000Mbps unmanaged gigabit PoE Switch complete.

Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting LED flexible strip light 5m lengthupto 25W conforming IP 65 of any colour with drive complete.

Supplying and erecting LED flexible strip light 5m length upto 75W conforming IP 65 of any colour with driver complete.

Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying & erecting suspension type decorative pendent fitting single light with anodized aluminium / powder coated MS rod up to 1 m length and canopy on top provided with decorative glass shed duly wired with two core flat wire suitable lamp holder complete

Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Supplying and erecting highbay LED fitting IP 65 with lamp 140W-150W, PF >0.95 duly connected complete with accessories as per specification no. FG-ODF/LED

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying, erecting, testing and commissioning 18 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, erecting, testing and commissioning 20 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, erecting, testing and commissioning 22 HP, VRF / VRV air conditioning system, out door unit (ODU)complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, erecting, testing and commissioning 24 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete

Supplying, erecting, testing and commissioning 28 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 8.0TR ( 3200 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.

Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300 cfm capacity with maintaining the static pressure minimum 20 mm of Hg complete suitable to operate on 1ph, 230 V, 50Hz, A.C. supply.

Supplying and erecting circular flexible / rigid PVC pipe duct of size 50 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc with sealing complete with provided control/ air flow regulating valves / dampers, filters at position.

Supplying and erecting circular flexible / rigid PVC pipe duct of size 100 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc with sealing complete with provided control/ air flow regulating valves / dampers, filters at position.

Supplying and erecting an air flow regulating valves / dampers in provided flexible or rigid duct / pipe of 50 mm size with an alteration for existing flexible pvc pipe duct and necessary joints, sealing, couplings complete at position.

Supplying and erecting an air flow regulating valves / dampers in provided flexible or rigid duct / pipe of 100 mm size with an alteration for existing flexible pvc pipe duct and necessary joints, sealing, couplings complete at position.

Supply, installation, testing and commissioning cordless remote contol having colour LCD panel, real time clock, temperature limitation (16 to 30 degree Cent.), functions like filter clean reminder timer suitable to communicate with wired controller complete.

Supplying, erecting, testing and commissioning centralised programmable remote contol panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system.

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC2007.

Providing and applying of accoustic insulation for air ducts with 25 mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.

Supplying & erecting tile type modular diffuser made from aluminium sheet complete with powder coated matching to the ceiling shade for provided suuply and return air

Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.

Supplying and installing of coller damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of required size

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV /VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations complete with OEM standards of VRV / VRF air conditioning system

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system Note :- 1).The rates of ODU's having COP ranging from 4.00 to 4.80, the material rate of item nos. 3-11-1 to 3-11-12 shall be increased by 25%. 2).Pipe insulation of heating system and cooling systems shall be as per the table 5.6 and 5.7 of Energy Conservation Building Code (ECBC)-2007 user guide. 3)Duct work insulation R value in m2 - K/W shall be as per table 5.8 of Energy Conservation Building Code (ECBC)-2007 user guide. Sample R values for duct insulation materials shall be referred from table 5.9.

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 40A to 63A C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 poles/ 8 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distributionboard (SPNDB) with door surface/flush mounted with 2poles for incoming and 10 poles for outgoing SP MCB’son iron/ GI frame as per specification no. SWSWR/MCBDB

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A. 3 pin plug & earth socket and 30A. 3 pin plug top with 30A three pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x0.315 cm complete with all materials, testing & recording theresults as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11V

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of fire service main single stage pump, of 1800 LPM at 76 m head centrifugal type, 50 HP (37 kW), 3 phase, 415 volt, 50Hz or of suitable HP complete as per specification no. FF-MFP/SSC

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of jockey pump of 240 LPM at 56 m head, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FFMFP/ JP

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 180 LPM at 40 m Head, 5 HP (3.75 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FFMFP/ BP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-P

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Supplying and erecting cast iron double flange sluice valve 100mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 150mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 200 mm dia. complete as per specification no. FF-VL/SV(13-6-12)

Supplying & erecting cast iron double flange butterfly valve of size 80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 80 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FFVL/ELS

Supplying and erecting cast iron foot valve ball type/flap type of size 150 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting cast iron foot valve ball type/flap type of size 200 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying & erecting gun metal gate valve of size 25 mm dia complete as per specification no. FF-VL/GV

Supplying & erecting gun metal gate valve of size 50 mm dia complete as per specification no. FF-VL/GV

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying & installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying & erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ

Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete as per specification no. FFFA/ FBC

Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC(13-7-11)

Supplying and installing air vessel of 300 mm dia 1.5m in height M.S. tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FFFFA/ARV

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.)made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FFFAS/HD

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD

Supplying, installing, testing and commissioning four wire conventionally single ended reflected type beam smoke detector with 8 “ receiver . The range of smoke detector is max 164 feet.

Supplying, installing, testing and commissioning of manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning of hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning of FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of 4 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

SITC of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, cou ling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head 50HP

SITC of Electric Traction Passenger Lift with • Rated capacity :- 13 Passenger/408Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 900 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floorClear Car size of 1100 mm wide x 2000 mm deep x 2250 mm high• LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor / control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of 2800 mm DEPTH (2nos) & 2500 mm wide x2230 mm (1 No) X1500 MM PIT DEPTH Notes 1) General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule.

Supplying, installing, testing, and commissioning of self Luminous Exit Sign in accordance with BS5499as per sample approved by incharge (FIRE EXIT 300mm X 150mm)

Supplying and erecting Suspended type LED Pendent fitting having wattage 60W with black PVC body having lumen output of 5400 lm, 4000k, Ra> 80 System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% ,

Supplying and erecting decorative type Suspended type LED round fitting having wattage 120 W with black PVC body having lumen output of 10800 lm, 4000k, Ra> 80 System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% ,

SITC of LED flexible strip light 5m lengthupto 24W,3000k of any colour with drivecomplete. System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10%, PF not less than 0.95,

SITC of Amplifier 480 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

SITC of Mixture amplifier compitable with USB, Bluetooth device of 240 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

SITC of 6 Zone Controller compitable with Built-in message manager and 240 W amplifier, having Six‑zone outputs, 6 emergency and 6 business triggers for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

Supplying, erecting, testing and commissioning celling mounted 6 Watts speaker complete as per specification

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of 0.63mm sheet thickness complete as required.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of0.8mm sheet thickness complete as required.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of1mm sheet thickness complete as required.

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 4 MP Full HD IPDome Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 64 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. ( 3 years warrenty )

SITC of 42" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 20W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

SITC of Conv. Centre & Sport Complex Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14 swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O No-1 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity DG I/O No-2 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity ON LOAD four pole changeover switch 415V, 400A, 50 Hz Bus bar chamber TPN & E with aluminium bars 800 A. Outgoing 63A TPN MCB C series - 15 Nos.

SITC of DG Distribution Panel forConv. Centre & Sport Complex having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14 swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, as per SLD having following items:- Main I/O Main I/O 1000 Amp ACB manually operated non-drawout type of 1000A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s), with standard accessories and thermal magnetic release Bus bar chamber TPN & E with aluminium bars 1200 A. Outgoing 200A TP MCCB with SC rating 25 kA (Ics=100% of Icu)- 2 Nos

SITC of Auditorium Block Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14 swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O No-1 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity DG I/O No-2 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity ON LOAD four pole changeover switch 415V, 200A, 50 Hz Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing 63A TPN MCB C series - 3 Nos. 25A SP MCB - 5 Nos

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for 2 Way light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW 3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of point wiring.

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying & installing co-axial copper cable low voltage grade RG-6 as per specification No. WG-TW

Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) suitable for 9 W - 12 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequeredplates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A complete as perspecification no. CP-BB

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV

SITC of Teacher Colony Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14 swg GI sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity Bus bar chamber TPN & E with aluminium bars 200 A. Outgoing 63A TPN MCB C series - 18 Nos.

SITC of Meter Panel for Teacher Colony (4 Flat Bldg) having details as below for fixing meters complete with wiring, fittings and accessories, ON - Off Indicating LED lamp, locking arrangements and painting and 100 x100mm Display of Acrelyc sheet 2mm Thick for each meter,(size adequate for the following equipment, internal wiring and termination of external cables, lugs and glands and conduits as required, comprising of the following: - Incomer 63A 4 pole MCB - 1 No Busbars 100A TPN & EARTH 40A DP MCB's -5 Nos. static energy meter with 240V 50 Hz. AC supply 5 to 30 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, V, I, kW six month history of energy and MD in kVA ) - 5Nos

SITC of Meter Panel for Teacher Colony (2 Flat Bldg) having details as below for fixing meters complete with wiring, fittings and accessories, ON - Off Indicating LED lamp, locking arrangements and painting and 100 x100mm Display of Acrelyc sheet 2mm Thick for each meter,(size adequate for the following equipment, internal wiring and termination of external cables, lugs and glands and conduits as required, comprising of the following: - Incomer 63A 4 pole MCB - 1 No Busbars 100A TPN & EARTH 40A DP MCB's -5 Nos. static energy meter with 240V 50 Hz. AC supply 5 to 30 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, V, I, kW six month history of energy and MD in kVA ) - 5Nos

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW 3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of point wiring.

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying & installing co-axial copper cable low voltage grade RG-6 as per specification No. WG-TW

Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) suitable for 9 W - 12 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPN MCB 40A to 63A, C series in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & utgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequeredplates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A complete as perspecification no. CP-BB

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652–2006&CPRI tested having 2.5mm thickness upto 11 kV

SITC of Teacher Colony Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14swg GI sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity Bus bar chamber TPN & E with aluminium bars 200 A. Outgoing 63A TPN MCB C series - 10 Nos.

SITC of Meter Panel for Staff Colony for fixing meters complete with wiring, fittings and accessories, ON - Off Indicating LED lamp, locking arrangements and painting and 100 x100mm Display of Acrelyc sheet 2mm Thick for each meter,(size adequate for the following equipment, internal wiring and termination of external cables, lugs and glands and conduits as required, comprising of the following: - Incomer 63A 4 pole MCB - 1 No Busbars 100A TPN & EARTH 40A DP MCB's -5 Nos. static energy meter with 240V 50 Hz. AC supply 5 to 30 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, V, I, kW six month history of energy and MD in kVA ) - 5Nos

Supplying & erecting HMS P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 3x6 sq.mm. and earth wire 4 sq.mm FR PVC copper wire in HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC.

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH– 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface

Supplying and erecting LED Mirror Light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.

Supplying and erecting 2 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board.

Supplying & erecting suspension type decorative pendent fitting single light with anodized aluminium / powder coated MS rod up to 1 m length and canopy on top provided with decorative glass shed duly wired with two core flat wire suitable lamp holder complete

Supplying & erecting suspension type decorative fitting with rise /fall arrangement, 1 light inside semi-circular metallic reflector with counterweight with guide pulley / spring buffer with work shop type copper flexible wire complete with necessary hook, if required.

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.

Supplying, installing, testing and commissioning of 11 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SWSWR/ MCB

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SWSWR/ MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 poles/ 8 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/ RCCB

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

SITC of LED flexible strip light 5m lengthupto 24W,3000k of any colour with drivecomplete. System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10%, PF not less than 0.95,

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC/HLC/DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 4 MP Full HD IP Dome Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC/HLC/DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 8 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera.

SITC of 22" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying & erecting jelly filled unarmoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification NoWG-COC/NC ( Mains 140 + CCTV- 290)

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG- AS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH– 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying and erecting LED street light fitting 150 W including lamp, with PF > 0.95 class IP 65 and above housingof pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2.

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 150 litres/hr and storage capacity 150 litres with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying, installing, testing and commissioning of 15 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SWSWR/ MCBDB

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A. 3 pin plug & earth socket and 30A. 3 pin plug top with 30A three pole MCB complete erected on angle iron/ GI frame.

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130mm A/F, top 70 mm A/F on provided foundation as perspecification no. OH-PL/OPL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FFFAS/HD

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD

Supplying, installing, testing and commissioning of manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning of hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning of FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

Supplying and erecting Suspended type LED Pendent fitting having wattage 60W with black PVC body having lumen output of 5400 lm, 4000k, Ra> 80 System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% ,

Supplying and erecting decorative type Suspended type LED round fitting having wattage 120 W with black PVC body having lumen output of 10800 lm, 4000k, Ra> 80 System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% ,

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC/HLC/DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 8 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. 3 years warranty)

SITC of 22" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

SITC of Amplifier 240 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

SITC of Horse Riding Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O No-1 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity DG I/O No-2 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity ON LOAD four pole automatic transfer switch 415V, 200A, 50 Hz Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing 63A TPN MCB C series - 15 Nos.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying & erecting jelly filled unarmoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification NoWG-COC/NC

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH– 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying and erecting LED street light fitting 150 W including lamp, with PF > 0.95 class IP 65 and above housingof pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2.

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting exhaust fan heavy duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 150 litres/hr and storage capacity 150 litres with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 500 LPD capacity a complete. Specification no. ESD-SHWS-FPC

Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 100 LPD capacity a complete. Specification no. ESD-SHWS-FPC

Supplying and erecting GI pipe 32 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material complete. Specification no.(ESDHWP/ TGP)

Supplying, installing, testing and commissioning of 120 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SWSWR/ MCBDB

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A. 3 pin plug & earth socket and 30A. 3 pin plug top with 30A three pole MCB complete erected on angle iron/ GI frame.

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 500 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130mm A/F, top 70 mm A/F on provided foundation as perspecification no. OH-PL/OPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x0.315 cm complete with all materials, testing & recording theresults as per specification no. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FFFAS/HD

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD

Supplying, installing, testing and commissioning of manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning of hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning of FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC/HLC/DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 8 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. ( 3 years warranty)

SITC of 22" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

SITC of Amplifier 240 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

Supplying and erecting Suspended type LED Pendent fitting having wattage 60W with black PVC body having lumen output of 5400 lm, 4000k, Ra> 80 System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% ,

Supplying and erecting decorative type Suspended type LED round fitting having wattage 120 W with black PVC body having lumen output of 10800 lm, 4000k, Ra> 80 System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% ,

SITC of Mess Block Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O No-1 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity DG I/O No-2 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity ON LOAD four pole changeover switch 415V, 200A, 50 Hz Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing 63A TPN MCB C series - 15 Nos.

SITC of Heat pump System of 500LPH Capacity Input Power - 5 KW, Output Power - 20.9 KW, minimum COP - 3.8 -4, Refregerant - R407C, Oprating Temp. - 55 degree Celecius. Rated Voltage - 415 V, 3 phase, 50 Hz supply. Along with 1 no. Scroll Type Compresser. Fan of 2401 CFM, Condesor - Blazed Plate type Heat Exchenger. Circulation Pump Flow - 4100LPH, Circulation Pump Head - 15-20 mtr. 1.5mm GI Cabinet with 100 micron Powder Coating of size 890mm x 900mm x 890mm. internal Control panel with Complete Electrical Protection For Field Issues • Under/ Low Voltage Protection • Single Phasing/ Phase Missing & Reversal Protection • Compressor Overload Protector • Pump Overload Protector • MCB/Fuse As Standard, with related cable harnessing,

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

2 Way Point wiring for light concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW 3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of point wiring.

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying & installing co-axial copper cable low voltage grade RG-6 as per specification No. WG-TW

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. {For CCTV}

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Supplying & erecting 20W LED PAR (30 Lamp E-27 Base, SPOTO series) lights by making necessary arrangement/recess in wall to make it flush with surface.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier withsoftener for safe drinking water consisting of UV germicidaltube of 8W capacity, choke made of copper wire, twoindicator lamps, dual function cartridge with output ofpurified water 2 litre/min. with activated carbon filter andsoftener operating on 230 V single phase AC supply.

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 100 LPD capacity a complete. Specification no. ESD-SHWS-ETC Note 1. If the solar water heating system is to be provided with heat exchanger, increase overall rates by 15 %.

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity complete. Specification no. ESD-SHWS-ETC Note 1. If the solar water heating system is to be provided with heat exchanger, increase overall rates by 15 %.

Supplying and erecting GI pipe 32 mm dia B class with resinbonded flap rock wool/glass wool insulation, with necessary material complete. Specification no.(ESDHWP/TGP)

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 40A to 63A C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SWSWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SWSWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SWSWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SW-RCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB onlyof electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

SITC of Boys Hostel Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O No-1 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity DG I/O No-2 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity ON LOAD four pole changeover switch 415V, 200A, 50 Hz Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing 63A TPN MCB C series - 10 Nos. 25A SP MCB - 2 Nos

SITC of Heat pump System of 500LPH Capacity Input Power - 5 KW, Output Power - 20.9 KW, minimum COP - 3.8 -4, Refregerant - R407C, Oprating Temp. - 55 degree Celecius. Rated Voltage - 415 V, 3 phase, 50 Hz supply. Along with 1 no. Scroll Type Compresser. Fan of 2401 CFM, Condesor - Blazed Plate type Heat Exchenger. Circulation Pump Flow - 4100LPH, Circulation Pump Head - 15-20 mtr. 1.5mm GI Cabinet with 100 micron Powder Coating of size 890mm x 900mm x 890mm. internal Control panel with Complete Electrical Protection For Field Issues • Under/ Low Voltage Protection • Single Phasing/ Phase Missing & Reversal Protection • Compressor Overload Protector • Pump Overload Protector • MCB/Fuse As Standard, with related cable harnessing,

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 4 MP Full HD IPDome Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 64 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. ( 3 years warranty)

SITC of 22" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

SITC of 42" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 20W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty) {For TV Room}

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

SITC of Amplifier 480 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

2 Way Point wiring for light concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW 3) For point wiring in stair case with 2 way control point increase overall rate by 50 % of point wiring.

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying & installing co-axial copper cable low voltage grade RG-6 as per specification No. WG-TW

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. {For CCTV}

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Supplying & erecting 20W LED PAR (30 Lamp E-27 Base, SPOTO series) lights by making necessary arrangement/recess in wall to make it flush with surface.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier withsoftener for safe drinking water consisting of UV germicidaltube of 8W capacity, choke made of copper wire, twoindicator lamps, dual function cartridge with output ofpurified water 2 litre/min. with activated carbon filter andsoftener operating on 230 V single phase AC supply.

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity a complete. Specification no. ESD-SHWS-ETC Note 1. If the solar water heating system is to be provided with heat exchanger, increase overall rates by 15 %.

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity complete. Specification no. ESD-SHWS-ETC Note 1. If the solar water heating system is to be provided with heat exchanger, increase overall rates by 15 %.

Supplying and erecting GI pipe 32 mm dia B class with resinbonded flap rock wool/glass wool insulation, with necessary material complete. Specification no.(ESDHWP/TGP)

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 40A to 63A C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SWSWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SWSWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SWSWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SW-RCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB onlyof electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

SITC of Girls Hostel Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O No-1 63 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity DG I/O No-2 63 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity ON LOAD four pole automatic transfer switch 415V, 63A, 50 Hz Bus bar chamber TPN & E with aluminium bars 100 A. Outgoing 63A TPN MCB C series - 2 Nos. 25A SP MCB - 2 Nos

SITC of Heat pump System of 500LPH Capacity Input Power - 5 KW, Output Power - 20.9 KW, minimum COP - 3.8 -4, Refregerant - R407C, Oprating Temp. - 55 degree Celecius. Rated Voltage - 415 V, 3 phase, 50 Hz supply. Along with 1 no. Scroll Type Compresser. Fan of 2401 CFM, Condesor - Blazed Plate type Heat Exchenger. Circulation Pump Flow - 4100LPH, Circulation Pump Head - 15-20 mtr. 1.5mm GI Cabinet with 100 micron Powder Coating of size 890mm x 900mm x 890mm. internal Control panel with Complete Electrical Protection For Field Issues • Under/ Low Voltage Protection • Single Phasing/ Phase Missing & Reversal Protection • Compressor Overload Protector • Pump Overload Protector • MCB/Fuse As Standard, with related cable harnessing,

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 4 MP Full HD IPDome Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 64 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera.

SITC of 22" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

SITC of 42" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

SITC of Amplifier 480 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification.

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) HFFR grade copper wires, modular type switch, earthing and required accessories

Point wiring for independent plug in ISI mark HMS PVC conduit with 1.5 sq.mm (2+1E )HFFR grade copper wire,modular type switch, earthing and required accessories

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying & erecting jelly filled unarmoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification NoWG-COC/NC (CCTV - 325 + Computer - 310)

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying LED concealed type foot / step light with PVC body for indoor application suitable for upto 5 W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying and erecting LED street light fitting 150 W including lamp, with PF > 0.95 class IP 65 and above housingof pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2.

Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC

Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 150 litres/hr and storage capacity 150 litres with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia /size 16 mm complete

Supplying and erecting elastomeric nitrile rubber / foam tubetype sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter /sizes 16 mm for solar water heater sys

Supplying & erecting on line UPS pure sine wave of 3 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 100 LPD capacity a complete. Specification no. ESD-SHWS-FPC

Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 500 LPD capacity a complete. Specification no. ESD-SHWS-FPC

Supplying and erecting GI pipe 32 mm dia B class with resin bonded flap rock wool/glass wool insulation, with necessary material complete. Specification no.(ESDHWP/ TGP)

Supplying, installing, testing and commissioning of 120 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distributionboard (TPNDB) with door surface/ flush mounted SPMCB of 12 poles/phase (36 poles) on iron/ GI frame(horizontal busbar type) as per specification no. SWSWR/MCBDB

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A. 3 pin plug & earth socket and 30A. 3 pin plug top with 30A three pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP/TP MCB of 36 poles /12 ways iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130mm A/F, top 70 mm A/F on provided foundation as perspecification no. OH-PL/OPL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x0.315 cm complete with all materials, testing & recording theresults as per specification no. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

SITC of Light Fixture as follows 30W LED HANGING LINEAR LIGHT FIXTURE, MATERIAL ; ALUMINIUM & PC, LED : BRIDGELUX, CRI : 80, COLOR TEMP. ; 4000K, LUMENS; 3300lm, EFFICACY: 110lm/W, BEAM ANGLE: 110°, IP RATING : IP20, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% , PF not less than 0.95 DIMENSION : 1000mm X 50mm X 70mm

SITC of Light Fixture as follows 60W LED HANGING CIRCULER LIGHT FIXTURE, MATERIAL ; ALUMINIUM & PC, LED : BRIDGELUX, CRI : 80, COLOR TEMP. ; 4000K, LUMENS ; 6600lm, EFFICACY : 110lm/W, BEAM ANGLE : 110° , IP RATING : IP20, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10%. PF not less than 0.95, DIMENSION : 900mmDia x 90mm

SITC of Light Fixture as follows, 120W LED HANGING CIRCULER LIGHT FIXTURE, MATERIAL ; ALUMINIUM & PC, LED : BRIDGELUX, CRI : 80, COLOR TEMP. ; 4000K, LUMENS ; 11880lm, EFFICACY : 110lm/W, BEAM ANGLE : 110° , IP RATING : IP20, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10%,PF not less than 0.95,,DIMENSION : 1200mm Dia x 90mm

SITC of Heat pump System of 250LPH Capacity Input Power - 2.84 KW, Output Power - 11.85 KW, minimum COP - 3.8 -4, Refregerant - R407C, Oprating Temp. - 55 degree Celecius. Rated Voltage - 415 V, 3 phase, 50 Hz supply. Along with 1 no. Scroll Type Compresser. Fan of 1389 CFM, Condesor - Blazed Plate type Heat Exchenger. Circulation Pump Flow - 2385LPH, Circulation Pump Head - 15-20 mtr. 1.5mm GI Cabinet with 100 micron Powder Coating of size 890mm x 900mm x 890mm. internal Control panel with Complete Electrical Protection For Field Issues • Under/ Low Voltage Protection • Single Phasing/ Phase Missing & Reversal Protection • Compressor Overload Protector • Pump Overload Protector • MCB/Fuse As Standard, with related cable harnessing,

SITC of 4 MP Full HD IPDome Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 32 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. (3 years warranty)

SITC of 22" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

Supplying, erecting, testing and commissioning celling mounted 6 Watts speaker complete as per specification

SITC of Amplifier 240 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

SITC of Hospital Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing 63A TPN MCB C series - 15 Nos.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW 3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire. Earth wire should be of green colour.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6/16A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm(2+1E) FR grade copper wires, modular type switch andsocket, earthing and required accessories as per specification No WG-PW/SW

Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying & erecting jelly filled unarmoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC (CCTV - 290 + Mains - 310)

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH– 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete

Supplying and erecting LED street light fitting 150 W including lamp, with PF > 0.95 class IP 65 and above housingof pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2.

Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‗E‘ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 150 litres/hr and storage capacity 150 litres with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying, installing, testing and commissioning of 120 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no.SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distributionboard (TPNDB) with door surface/ flush mounted SPMCB of 12 poles/phase (36 poles) on iron/ GI frame(horizontal busbar type) as per specification no. SWSWR/MCBDB

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A. 3 pin plug & earth socket and 30A. 3 pin plug top with 30A three pole MCB complete erected on angle iron/ GI frame.

Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB

Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 500 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130mm A/F, top 70 mm A/F on provided foundation as perspecification no. OH-PL/OPL

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x0.315 cm complete with all materials, testing & recording theresults as per specification no. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non corrosive bond in an approved manner with joints required. As per specification No EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FFFAS/HD

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/SD

Supplying, installing, testing and commissioning of manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning of hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning of FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FFPA/ SOC

Supplying, erecting, testing and commissioning microphone complete as per specification

Supplying, erecting, testing and commissioning table stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

SITC of Light Fixture as follows 60W LED HANGING CIRCULER LIGHT FIXTURE, MATERIAL ; ALUMINIUM & PC, LED : BRIDGELUX, CRI : 80, COLOR TEMP. ; 4000K, LUMENS ; 6600lm, EFFICACY : 110lm/W, BEAM ANGLE : 110° , IP RATING : IP20, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10%. PF not less than 0.95, DIMENSION : 900mmDia x 90mm

SITC of Light Fixture as follows, 120W LED HANGING CIRCULER LIGHT FIXTURE, MATERIAL ; ALUMINIUM & PC, LED : BRIDGELUX, CRI : 80, COLOR TEMP. ; 4000K, LUMENS ; 11880lm, EFFICACY : 110lm/W, BEAM ANGLE : 110° , IP RATING : IP20, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10%,PF not less than 0.95,,DIMENSION : 1200mm Dia x 90mm

SITC of Amplifier 240 W for public address system suitable to operate on 230 V A.C./ 24 Volts D.C. supply complete as per specification

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC /HLC/ DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/ High/ Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 8 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. (3 years warranty)

SITC of 22" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 6W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

SITC of Workshop Main Panel having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing 63A TPN MCB C series - 15 Nos.

Supplying and erecting PVC insulated PVC round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV {for Flood Light of War Memories, Shivaji Statue and Helipad}

Supplying & erecting jelly filled armoured telephone copper cable 10 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW

Supplying & erecting jelly filled armoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW

Supplying & erecting jelly filled armoured telephone copper cable 100 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW

Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WGTW

Supplying, erecting & commissioning MDF Box 60 x 60 pairs as per specification No. WG-TW

Supplying, erecting & commissioning MDF Box 100 x 100 pairs as per specification No. WG-TW

Supplying, erecting & commissioning MDF Box 150 x 150 pairs as per specification No. WG-TW

Supplying, erecting & commissioning junction box suitable for 10 pairs as per specification No. WG-TW

Supplying, erecting & commissioning junction box suitable for 20 pairs as per specification No. WG-TW

Supplying, erecting & commissioning junction box suitable for 60 pairs as per specification No. WG-TW

Supplying & installing UTP networking Cat-6 cable suitable for LAN / WAN Computer net-working as per specification No.WG-COC/NC

Supplying & installing UTP networking cat-6 armoured cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying and erecting LSZH armoured multimode Optical Fibre Cable with 24 fibres, with core dia 50/125 Gm (OM4) suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 1 x 6 duplex adapter panel - SC as per specification complete

Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & Fibre switch/Fibre module as per specification no. WG-NAS/MMA

Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification No. WGNAS/ LIU2

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 450x550x767 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 0/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying, fixing, and configuring 48 ports managed gigabit switches layer-2 48 10/100/1000Base-T ports L2+ Management Switch with 4 10GE SFP+ ports complete.

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/FLS-2.

Supplying and erecting LED Flood light fitting of 120Wincluding lamp, with PF > 0.95,class IP 65 and abovHousing of pressure die cast aluminium alloy and heat sinextruded aluminium complete per specification No FGODF/FLS-2

Supplying and erecting LED Flood light fitting of 150W,including lamp, with PF > 0.95,class IP 65 and aboveHousing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS-2

Supplying and erecting Recess mounted 20W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Supplying and erecting Recess mounted 30W LED wallwashers, tilted 70° outwards and swivels 360° to offer bestillumination on the wall with any colour with driver complete.( Including Compatible Driver)

Supplying and erecting cylindrical shaped integral decorativewith high power 12W-16W LED bollard upto 1000mm withopal acrylic diffuser and IP65 protection on providedfoundation complete.

Supplying and erecting 40W LED post top made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection on provided pole/ bracket.

Supplying and erecting Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe as per specification No. FG-ODF/GLT

Supplying & erecting integral post top lantern fixtures (light house type) suitable for LED lamp upto 18 W consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL (NEW)

Supplying and erecting mini feeder pillar triple pole with 300A FPMCCB as incomer and 3 outgoing circuits with HRC fuse base and cartridge of 100A consists of aluminium bus bar 500V 300A complete erected in 14 gauge CRCA sheet box with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation as per specification no. SW-SWR/MFP

Supplying & erecting street light control panel outdoor type, for three phase 4 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery backup, 4 pole contactor upto 60 A, with maintenance mode to switch ON street lights during time of repairs with energy consumption] data recording for analysis and LCD display for energy monitoring with numeric key pad in provided box complete.

Supplying , erecting, testing & commissioning SF 6 Insulated 22kV, 630A, 16kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 1 no. feeder with load break switch and 1 no. feeder with VCB as per specification no. SW-HTS / RMU SCADA (1LBS +1VCB)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying , erecting & terminating 3 x 300 sq. mm. aluminium 22 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CBHT

Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 240 to 300 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CBJT/ HT

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CBJT/ HT

Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting FRP box of size 300 x 200 x 125 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB

Supplying and erecting 16 m (clear height) High Mast (Top- 150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OH-PL/HM (excluding luminaries).

Supplying and erecting 16 m (clear height) High Mast (Top- 150 mm, Bottom- 410mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 12 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OH-PL/HM (excluding luminaries).

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130mm A/F, top 70 mm A/F on provided foundation as perspecification no. OH-PL/OPL

Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as perspecification no. OH-PL/PBKT

Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete .

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP. CU Strip - 25 x 5 mm

Supplying, installing, testing & commissioning 3 phase, 22/0.433 kV, 50 Hz., 630 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 1953 Watts at 50% load, 5565 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification no SS- TR.

Supplying, erecting and commissioning of diesel generating set with alternator of 100 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG

Supplying, erecting and commissioning of diesel generating set with alternator of 160 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG

Supplying, erecting and commissioning of diesel generating set with alternator of 200 kVA output continuous rating, 3Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG

Supplying, erecting and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel, etc and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 100 kVA upto 125 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF.

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 140 kVA upto 180 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF.

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 200 kVA upto 250 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF.

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 400 kVA upto 500 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6/8m high octagonal GI pole).

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast).

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). {For DG Set }

SITC of Light Fixture as follows 800W LED Module Pressure die-cast Aluminum heat sink & high efficiency long life SMD LED mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output. With 25 mtrs 5CX1.5sqmm connecting Grey wire with attached IP66 connector . The LED module offer a flexibility to meet application requirement; COLOR TEMP. ; 5700K , IP RATING : IP67, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10%, PF not less than 0.95, DIMENSION : 836mm x 260mm x 503mm

SITC of Light Fixture as follows1000W LED Module Pressure die-cast Aluminum heat sink & high efficiency long life SMD LED mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output. With 25 mtrs 5CX1.5sqmm connecting Grey wire with attached IP66 connector. The LED module offer a flexibility to meet application requirement; COLOR TEMP. ; 5700K, IP RATING: IP67, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% , PF not less than 0.95, DIMENSION :836mm x 260mm x 503mm

SITC of Light Fixture as follows 1200W LED Module Pressure die-cast Aluminum heat sink & high efficiency long life SMD LED mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output. With 25 mtrs 5CX1.5sqmm connecting Grey wire with attached IP66 connector. The LED module offer a flexibility to meet application requirement; COLOR TEMP. ; 5700K , IP RATING : IP67, System efficacy shall not be less than 90 lumens/watt. CRI shall be more than 70. Total harmonic distortion voltage and current shall be less than 10% , PF not less than 0.95, DIMENSION : 836mm x 260mm x 503mm

Supplying,laying (including excavation) and jointing 300 MM RCC NP2 class pipes conforming to IS:458 - 2003 in prepared trenches in grade and level, including hoisting, making collar joints in cement mortar 1:1, including cost of jointing material like cement, sand etc. and hydraulic testing of the pipes at factory as well as on site as per the stipulation in relevant IS code etc. complete. including dewatering wherever necessary.[NON CSR]

Providing & constructing inspection chamber of 1000(L) x 1000(W) x 1000(D) (internal) size in B.B. masonry 230mm thick upto 1.5m depth and 350mm thick below uuto 1.0m depth in cement mortar 1:6, with foundation concrete 200mm thick in C.C. 1:4:8, and top R.C.C. heavy duty cover with frame, plastered on both faces in cement mortar 1:6, 20mm thick finished with neat float, including curing, cost of all labour, material, loading, unloading and transportation charges of material, including providing & fixing in position CI steps etc. completet. (Excluding the cost of excavation and including dewatering if required)[NON CSR]

Providing & constructing inspection chamber of 600(L) x 600(W) X 750(D) (internal) size in B.B. masonry 230mm thick upto 1.5m depth and 350mm thick below uuto 1.0m depth in cement mortar 1:6, with foundation concrete 200mm thick in C.C. 1:4:8, and top R.C.C. heavy duty cover with frame, plastered on both faces in cement mortar 1:6, 20mm thick finished with neat float, including curing, cost of all labour, material, loading, unloading and transportation charges of material, including providing & fixing in position CI steps etc. completet.

FEEDER PILLER of DTC -01 Supplying and erecting feeder pillar triple pole with 1000A 4P ACB, MF TYPE as incomer and Following sizes outgoing circuits with HRC fuse base and cartridge consists of aluminium bus bar 500 V 1200 A complete erected in 14 gauge CRCA sheet box with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation etc. out going 200A HRC, TP - 2 Nos 400A HRC, TP - 4 Nos 630A HRC, TP - 1 No.

SITC ofl C/O Panel for Girls Hhostel, Principal Bungalow, VP, Admin Bungalow having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14 swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O No-1 400 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity DG I/O No-2 400 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity ON LOAD four pole c/o switch 415V, 400A, 50 Hz Bus bar chamber TPN & E with aluminium bars 800 A. Outgoing 100A TP MCCB - 4 Nos

SITC of C/O Panel for VIP/VIIP Guest House, Hospital having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14 swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/O 400 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity - 2 Nos. Bus bar chamber TPN & E with aluminium bars 800 A. Outgoing 100A TP MCCB - 4 Nos 200A TP MCCB - 1 Nos

"Supply, installation, testing & commissioning of C/O Panel for Streetlight and Sport lighting as per Specification having details as below Panel should be fully compartmentallised, Floor mounted with M.S. Channel dully painted, fabricated of 14 swg CRCA sheets completely derusted, chemically treated and powder coated with approved shade, ON - Off Indicating LED lamp, locking arrangements, withdual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering and LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden as per SLD having following items:- Main I/C 200 Amp FP MCCB. 25 kA (Ics=100% of Icu) capacity Bus bar chamber TPN & E with aluminium bars 400 A. Outgoing 100A TP MCCB - 12 Nos

SITC of 4 MP Full HD IP Bullet Camera Image Sensor 1/3" 4 megapol progressivescan CMOS Effective Pixels 2304 (H) 1296 (V) Electronic Shutter Speed Auto Manual 1-1/100000 s Min Illumination 0.5 lux. F21 (Color): 0 lux (R LEDS on IR Distance-nupto 100 m (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation-BLC/HLC/DWDR White Balance Auto Manual Gain Control - Auto/Manual Noise Reduction - 30 Privacy Masking- Up to 4 areas Lens Focal Length- 2.8 mm Horizontal Angle of View 92 86-28 Compression H.265 (Main/High/Baseline Profile) /MJPEG Resolution 3. MP (2304x1296) 1080p Main Stream 4 MP.30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPv6 HTTP HTTPS TCP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPoE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile S CGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af) 12 V DC Working Environment -22°F to 140°F (-30°C to 60°C). 10% to 100% RH. condensing Ingress Protection IP66 Vandal Resistance IK10 Regulatory FCC Part 158 Class B (3 years warranty)

SITC of 4MP PTZ Network Camera with Fixed focal length 4 mm lens and UF: Built-in microphone for real-time audio security, Max. Resolution 2560 × 1440, Image Sensor 1/3" progressive scan CMOS, Min. Illumination Color: 0.01 Lux @ (F2.0, AGC ON), B/W: 0 Lux with IR, Focal Length & FOV 2.8 mm, horizontal FOV 98.0°, vertical FOV 53.1°, diagonal FOV 114.7° 4 mm, horizontal FOV 78.7°, vertical FOV 43.1°, diagonal FOV 92.3°, IR Wavelength 850 nm IR Range Up to 30 m, Web Browser Plug-in required live view: IE 10+, Plug-in free live view: Chrome 57.0+, Firefox 52.0+, Local service: Chrome 57.0+, Firefox 52.0+, Image Settings Saturation, brightness, contrast, sharpness, AGC, white balance adjustable, software or web browser, Day/Night Switch Auto, Schedule, Day, Night, Image Enhancement BLC, 3D DNR. Ethernet Interface 1 RJ45 10 M/100 M self-adaptive Ethernet port, On-Board Storage -UF: Built-in memory card slot, support microSD card, up to 256 GB. General Function Anti-flicker, heartbeat, mirror, password protection, privacy mask, watermark, IP address filter Firmware Version V5.5.120, Power Consumption and Current 12 VDC, 0.4 A, max. 5 W PoE: (802.3af, 36 V to 57 V), 0.2 A to 0.15 A, max. 6.5 W Power Supply 12 VDC ± 25%, PoE: 802.3af, Class 3 Power Interface Ø 5.5 mm coaxial power plug. Protection IP67 (IEC 60529-2013) (3 years warranty) UL CE & FCC certification (With 3Year Warranty)

SITC of 64 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera. (3 years warranty)

SITC of 42" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 20W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supply and Installation of 4 TB (7200 RPM) Surveillance hard disk 4 TB storage capacity with SATA suppon 6GB NCQ 64 MB cache 3.5 inches(3 years warranty)

Nyati Engineers And Consultants PVT Ltd