Providing and Laying of Medical Grade Copper Pipe for Oxygen dedicated for 07 Nos Operation Theatres along with allied works from Manifold Room to OTs at Govt. Bone and Joint Hospital, Jammu

Providing and Laying of Medical Grade Copper Pipe of Specifications (28mm OD x 0.9 mm thickness) for Oxygen dedicated for 07 Operation Theatres along with allied works from Manifold Room to 02 No’s Minor Operation Theatres at Ground Floor and then to 05 No’s Operation Theatres at Third Floor in Govt. Bone and Joint Hospital, Jammu. Copper Pipe should be Solid Drawn, Seamless, De-oxidized, Non-Arsenical, Half-Hard Fully De-Greased.It should Conform and meet with the latest BSEN 13348:2001 Standard. Chemical compositions as per CUDHP to 1190-1 and CWO 24A to EN 1412. Maximum Total Carbon Content 0.20 Mg/dm^2. The pipes shall be accompanied with Manufactures Test Certificate for the Physical Properties & Chemical Composition. The Copper Pipe should be suitably embossed with the Manufacturing Name/Logo. (Make: MEXFLOW/MANDEV/METALALLOY). Job also includes Providing & Fitting of G.I. Iron Cable Tray on top of Copper pipeline to prevent its theft from manifold room to Ground floor. Job includes Cost of Saddles, Fittings, Screws etc. for Laying/ Hanging of Copper Pipe. Complete job includes Cost of material, GST rates and transportation and installation charges.

Providing and Fitting of 4 gas Valve Box as per site requirement along with allied works at Govt. Bone & Joint Hospital, Jammu. The Valve Box includes Pressure Gauges, Lock System and individual Valves Lock System. The valve box includes Ball valves for individual gas and other allied accessories as per site requirement. Complete job includes cost of material, GST rates and transportation and installation charges.

Providing & Fitting of 4 gas Digital Type Pressure Alarm System along with allied works at Govt. Bone & Joint Hospital, Jammu. The specifications of 4-gas Digital Alarm System is as below: • Pressure for Individual Gases: i) For Oxygen: 4.2-15 bar ii) For Nitrous Oxide:4.2-5.5 bar iii) For Medical Air:4.2-8 bar iv) Vacuum:0.5-0.9 bar (or 375-675 mm Hg) • Display: i) Digital LED or LCD Display ii) Individual Gas Pressure Display iii) Colour coded (green= Normal, red= Fault • Alarm features: i) Visual Alarm: LED indicators for each gas line (green for Normal, Red for High/Low pressure) ii) Audible Alarm: greater than or equal to 65-80 DB Buzzer for fault/alarm conditions. Alarm Trigger: i) Pressure too high or low (outside set thresholds) ii) Gas Line Disconnect or leakage iii) Mute/Acknowledge button (auto reset when issue clears) • Pressure Sensors: i) Digital pressure Transducers (0-15 bar) ii) Accuracy: (+/- 1% or better) iii) Calibrated for specific Medical Gases • Power Supply: i) 230 V AC, 50 Hz Main power ii) Battery backup: 12V rechargeable for at least 6-8 hours iii) Power fail alarm • Communication & Logging: i) Optional RS485/BMS connectivity ii) Relay outputs for remote alarms iii) Event logging (in advance systems) • Mounting: i) Wall-mounted near the OT or central gas manifold ii) Flush-mount or surface-mount options. • Standards & Compliance: i) IHTM 02-01, NFPA 99, or ISO 7396-1 ii)CE certified iii) Medical-grade components iv) Electrical safety: IEC 60601 compliant • Enclosure i) IP54-IP65 rated for hospital environments ii) Powder-coated MS or ABS casing iii) Size: Typically ~300 mm × 300 mm × 100 mm (varies) Makes: MPS/Beacon Medaes (Atlas Copco)/Medi System/Penlon Complete job includes cost of material, GST rates and transportation and installation charges.