Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹54.5 L
EMD Value
₹54,500
Closing Date
31 Dec 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
EE PWD Dharwad
Annual maintenance other emergency works to PDJ quarters at Narayanapur, judge quarteres near KVG bank and judge quarters near new bus stand and painting judge quarters , painting and other works to the judge SE and AEE quarters , painting and other works to the judge quarters near New bus stand , near KVG bank , Painting and other works to the Principal district and session Judge in Narayanapur in Dharwad city for the year 2024-25
PWD/2024-25/BD/WORK_INDENT16201
PWD/2024-25/BD/WORK_INDENT16201
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Dharwada
9 documents required · 9 mandatory
List of existing commitments and ongoing works
List of Financial Resources with Certificates
Work Done Certificates obtained from the Competent Authorities
3.2 B) To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21, 2021-22, 2022-23 & 2023-24 Satisfactorily completed as prime contractor, for at least any construction work to an extent of 25 percent of cost of work of value not less than Rs. 13.62 Lakhs.
The contractor belonging to the Scheduled Caste category shall be domicile of the State of Karnataka for more than 10 years and Domicile of Karnataka State Certificate is issued by competent authority
The bidder ensure upload of relevant document certifying his/her status as Scheduled Caste (SC-Category) certificate issued from competent authority
Contact details of contractor Should mention valid Email ID, communication Address, Phone Number
Bid Capacity (A X N X 5 - B)
This work is Reserved for Scheduled Caste (SC-Category)
Registration Certificate P.W.D License Class- III & above
To qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22 2022-23 and 2023-24 executed in any one year the following minimum quantities of work 1)Painting - 14694.27 sqm.
Similar Nature work done certificate From 2019-20 to 2023-24
LOC/Letter of Credit should be in prescribed format-2, if not, then the tender will not be accepted
Qtywise work done certificate from 2019-20 to 2023-24
3.3) Each Tenderer should further demonstrate: (a) As per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GO FD/AE 263/EXP12-2022 dtd 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth specification. The following is the list of Plant & Equipment to be deployed on project 1) Excavator 2)Tippers / Trucks 3) Concrete Batching Plant 4) Construction elevator/Building Hoist/Tower Cranes 5)Water Tanker 6) Shuttering materials 7) Transit Mixers
Liquid assets and/or availability of credit facilities of not less than Rs. 16.34 Lakhs. (Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. LOC in the prescribed Format-2 given in bid document.
List of works for which tenders already submitted
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22, 2022-23, 2023-24 a) Achieved in at least One Financial years a minimum financial turnover (in all classes of civil engineering construction work only ) Rs.54.46 Lakhs along with UDIN is preferred in Turnover certificate
Annual Turnover Certificate along with profit and Loss account statements ITR Returns UDIN is preffered in Turnover Certificate. From 2019-20 to 2023-24
Annual Turnover Certificate UDIN is Prefered on Turnover Certificate 2019-20 to 2023-24
₹1,370
₹54,500
21 Dec 2024
21 Dec 2024
1 Jan 2025
30 Dec 2024
Painting and Other works to the Judge quarters near New Busstand at Dharwad city
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing brass bib cock of approved quality 20 mm nominal bore
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, ...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mmdia with length not less than 700 mm i/c PVC waste fittings
Providing and fixing brass curtain rods of wall thickness 1.25 mm withtwo brass brackets fixed with brass screws and wooden plugsetc. wherever necessary complete.20 mm diameter.
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Painting and Other works to the Judge quarters near KVG bank at Dharwad city
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing brass bib cock of approved quality 20 mm nominal bore
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, ...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mmdia with length not less than 700 mm i/c PVC waste fittings
Providing and fixing brass curtain rods of wall thickness 1.25 mm withtwo brass brackets fixed with brass screws and wooden plugsetc. wherever necessary complete.20 mm diameter.
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Annual maintenance other emergency repair works to PDJ quarters at Narayanapur, Judge quarters near KVG bank and judge quarters near new bus stand and Painting to the Judge quarters in Dharwad city for the year 2024-25
External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broo...
Clearing Grass and Removal of Rubbish & dumping tooutside periphery by manual means
Providing general disinfection services, spraying of insecticide and pesticide inside and outside the building (flies, bedbugs,lizards, cockroaches, spiders caterpillars etc., including cost of materi...
Mazdoor Light / Bisti
Carpenter Class 1
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Repairing door and window frames with available wood to the requiredsize.
Providing and fixing brass bib cock of approved quality 20 mm nominal bore
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing kitchen sink with C.I. brackets, C.P. brasschain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, ...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Brass double acting spring hinges 150 mm
Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mmdia with length not less than 700 mm i/c PVC waste fittings
Aluminum tower bolts
Top cover of Rolling shutters 1.20 mm thick
Non staining water resistant Clear silicon filling in gap
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc.,removal of silt, rubbish from the tank and cleaning the tank...
Providing and fixing brass curtain rods of wall thickness 1.25 mm withtwo brass brackets fixed with brass screws and wooden plugsetc. wherever necessary complete.20 mm diameter.
Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts bolts and washers etc complete
Repairs to existing modular kitchen with baskets, hinges, sliders/drawer, planks including finishing cost of materials, labour, complete as per specifications
Ceaning sub surface drains including removing of dirt dust etc., using suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster pu...
Cutting out cracks of roof terrace to V - section cleaning out, wetting,grouting with cement and sand slurry 1:3 (1 cement, 3 sand) including cost of materials, labour, complete as per specifications.
Cleaning and desilting of gully trap chamber, including removal ofrubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge.
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Painting and Other works to the Principal District and Session Judge in Narayanapur in Dharwad city .
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Repairing door and window frames with available wood to the required size.
Providing and fixing brass bib cock of approved quality 20 mm nominal bore
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mmdia with length not less than 700 mm i/c PVC waste fittings
Providing and fixing brass curtain rods of wall thickness 1.25 mm withtwo brass brackets fixed with brass screws and wooden plugsetc. wherever necessary complete.20 mm diameter.
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...
Ajoria Interiors Bedroom Wardrobes, Number of doors 3
Ajoria Interiors (Wardrobe)
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
KSRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including handpacking, ramming, watering, including cost of all materials and l...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embackment by excavating the available approved Gravel/Murrurm desposited a place or borrow pits during or priror excavation with all lifts and dead, transportation to site, spreading,...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upt...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:6 (1...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to ope...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with lymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I...
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen ...
Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished
laminate (1.5mm thick) and other side balancing lamination(preferably ...
Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 kg/m3
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw3 No 16201.docx
Tender Document • 0.27 MB
buildingspecification.pdf
Others - Building Specification • 0.87 MB
Electrical works specification.doc
Others - Electrical Specification • 0.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .