Construction of library F F at Govt High School Resham Ghar District Jammu

Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils .

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:5:10 (1 cement 5 coarse sand 10 graded stone agg. 40 mm nominal size) crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means)

Providing and laying in position cement concrete of specofied grade of reinforced cement concrete, excluding the cost of centering and shuttering, M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates.

Reinforcement of R.C.C work in slab, beams, lintel band, sunshades including cutting, bending,placing in position and binding and complete.

Centring and Shuttering including strutting, propping etc and removal of form work for foundation , footings , basis of columns etc. for mass concrete.

Suspended floors, roofs , landings , balconies and access platform.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Lintels, beams ,plinth beams, girders, bressumers and centilevers.

Edges of Slabs and Break in floors and walls under 20 cm wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) extra for half brick work in superstructure above plinth level upto floor 5 level

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 12. 5mm nominal size) Crushed

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

15mm thick Cement plaster in 1:6 (1 cement : 6 fine sand), .

6mm thick plaster in 1:3, Mix. Ceiling

Providing and fixing glazed shutters for doors,windows and clerestory windows using 10 Kg/sqm (4mm thick) float glass pains including ISI marked M.S. pressed but hinges bright fineshed of required size with necessary screws. 35 mm thick First class kail wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm

Providing and fixing panelled or panelled and glazedshutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al! completeas per direction of engineer- in charge. First class kail wood 35 mm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned & chemically treated hallock wood 50x12mm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm )

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. New Work

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Making plinth protection 50mm thick with cement conc. (1:3:6), 20mm nominal size of stone aggregates over 75mm bed of dry brick ballast, 40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 110mm dia

Coupler 110mm

Bend 110mm

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

25mm nominal outer dia pipes.

External work including trenching, refilling etc.

25mm nominal outer dia pipes.

Providing and laying in position pvc drainage pipe including all fitting , complete job. 4" dia

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore 125 mm long foam flow, weighing not less than 120 gms.

Making khurras 45*45cm with average minimum thickness of 5 cm cemnt concrete 1:2:4(1 cement 2 coarse sand 4 graded stone agg. Of 20mm nominal size) over pvc sheet 1m*1m*400 micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Engagement of painter for writing name of school,logo and making India map and charts on wall.

Providing and fixing wiring for light point/ fan point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with switches 6A, Fan regulator, plates, G.I box including supply of wiring, holders, Fan box, including LED bulb 9 watt, PVC conduit with SPN of 63 amp and MCB (10, 16 amp as per load) &4.0 sq mm wire from main board to room board, of make Anchor / Havells all job complete.

Providing and fixing wiring for power point with 2.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with switches 16A, plates, G.I box including supply of wiring, 16 amp socket, PVC conduit with MCB (32 amp as per load) & of make Anchor, Havells, Crompton, Orient, Bajaj all job complete.

Supply, installation, testing and commissioning of Ceiling Fan 3 Star Rated with Voltage 5.3 Cu.m/min/watt, Aluminium Blades, including wiring the down rods of standard length (upto 45cm) with 1.5 sq mm FR PVC insulated copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as required of make Anchor, Havells, Crompton, Orient, Bajaj all job complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16mm Sliding Door bolts.

tower bolts 200x10mm

tower bolts 150x10mm

tower bolts 100x10mm

handle 125mm

handle 100mm

Twin rubber stopper

Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. Sand lead up to 10 kms.

Stone aggregate below 40 mm lead up to 10 kms.

Bricks lead up to 15kms