ADDN/ALTRN AND SPECIAL REPAIRS TO CERTAIN JCOs and ORs MD ACCN OF HAVELOCK LINE, MUDFORT,SAPPER LINE, HASTING LINE, OM LINE,IMH LINE, ROBERT LINE WEST AND ROBERT LINE CENTRE AT SECUNDERABAD

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor, roof incl tar felt etc complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B2 (using 20mm graded aggregate) as in padding on roof surface averaging complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even complete all as specified and as directed. (Note : Supply of water proofing compound will be measured and paid separately .)

M&L for applying a coat of 85/25 bitumen based primer over the plastered surfaces @0.30Ltr/Sqm and providing and laying APP based polymeric membrane of 3mm thickness of weight not less than 3.50kg/sqm on primed surfaces by means of torch application with side overlap of 100 mm both longitudinally and transversely with a coat of bitumen primer of 85/25 grade @1.20Ltr/Sqm and solar reflective bituminous aluminium paint @0.20Ltr/sqm complete all as specified and directed

M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. .

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces and applying priming coat of NITO proof WB primer or equilvalent product of M/s MC Bauchemie/ STP/ CIPY/ SIKA/ Pidlite/ Dr Fixit/ Asian Paints/ Thermax applied as per manufactures instructions to bottom and full vertical sides of sunkun floors and all junction points of side and wall where CI/ GI pipes are passing through shall be sealed with epoxy cement mortar complete all as specified.

Supply only integral water proofing compound.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in level course on floor etc complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 and all as specified and directed.

All as per item No 11 above but on vertical surfaces as in skirting/dado level etc.

M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:4 and complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut pre polished kota stone slab flooring 16-20 mm thick in riser of steps, skirting, dado and pillar laid over 20mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar any description complete all as specified and as directed.

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified and as directed. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for rendering 10 mm thick on ceiling in CM 1:3 finished fair and even without using extra cement complete all as specified and as directed.

M & L for complete removal of existing treatment on concrete surface / masonry surfaces and applying two coats of OBD including priming with alkali resistant priming paint and preparation of old surface complete all as specified and as directed.

M & L for preparation of old surfaces on walls and applying one coat of OBD complete all as specified and as directed.

M & L for applying two coats of OBD including priming with alkali resistant primer and preparation of new surface complete all as specified and as directed.

M&L for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for preparation of old plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying one coat of cement base paint complete all as specified.

M & L for complete removal of existing treatment on concrete surface / masonry surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M&L of applying three coat of white wash on ceiling on new plastered surfaces etc complete all as directed.

M&L of complete removal of existing treatment on concrete surfaces and applying three coats of White wash on ceiling on old plastered surfaces etc complete all as directed.

M&L for preparation of old surface of ceiling and applying one coat of White wash on old plastered surfaces etc complete all as directed.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 sqm each incl iron mongery complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm but n.exc 4 sqm each incl iron mongery complete all as specified and as directed.

S & F powder coated (min. thickness 50 microns) aluminium frame for doors, windows ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.

S & F powder coated (min. thickness 50 microns) aluminium window and ventilator shutters, sliding type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as suitable handle (1No) complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples compete all as specified an directed.

S & F sheet glass ordinary quality 4mm thick n exc 0.50sqm in each pane and glazing with oil putty/glazing clips of any description compete all as specified an directed.

S&F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

M&L for Mild Steel flat iron as in hold fast supplied and fixed including tarring complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Coping and similar work complete all as specified and as directed.

M&L for 35 mm thick flush door shutters solid core construction with block board core with decorative face finish on one sides all as directed complete all as specified and as directed.

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and as directed.

M & L for preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying 2 coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for door stopper of aluminium alloy body Rubber 140 mm long complete all as specified and as directed.

S&F 18 mm thick plywood BWR type fixed with screws with timber framework complete all as specified and as directed.

Material and labour for 1 mm thick colour / white laminated sheet fixed to wooden surface with glue complete all as specified and as directed .

S & F 30 mm width of flap Continuous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

S&F for stainless steel 100mm hasp and staple, safety type with hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F 100mm long stainless steel barrel tower bolt complete all as specified and as directed.

S & F 150mm long stainless steel barrel tower bolt complete all as specified and as directed.

S & F 200 mm long stainless steel barrel tower bolt complete all as specified and as directed.

S&F 100 mm length stainless steel handles complete all as specified and as directed.

S&F 150 mm length stainless steel handles complete all as specified and as directed.

S & F 100mm size stainless steel butt hinges complete all as specified and as directed.

S & F 100 mm long stainless steel Butt hinges with hinge pin complete all as specified and as directed.

S & F 300 mm long stainless steel sliding door bolt with hasp staple (bolt type ) and fixing clips and fixing bolts and sliding bolts and fixed complete all as specified and as directed.

S&F 300 mm ordinary mild steel rat rail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F in repairs anodised aluminium alloy curtain rail, chromium plated with fixing brackets, stops, roller etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in base of water tank on roof surface complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 lts (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1.complete all as specified and as directed.

S&F 20mm ball valve high pressure with polyethylene float valve and fly nut complete screwed for iron pipe PTMT complete all as specified and as directed.

S & F Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe and loud complete all as specified and as directed.

Demolition of Brickwork or stone / boulders masonry laid dry, built in cement mortar complete all as specified and as directed.

M&L brick work with subclass B bricks ,straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement motor 1:4 complete all as specified and as directed.

M&L hard core of gauge n exc 63 mm broken stone or boulders deposited ,spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M & L for 75mm thick cement concrete 1:3:6 type C-1, using 20mm graded stone aggregates as in plinth protection finished fair and even with using extra cement complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D1 using 20mm graded aggregate as in sub base on floor etc complete all as specified and as directed.

M&L for chequered cement concrete designer tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1:6 complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

S&F in repair Vitreous china squatting pan, Orissa pattern of size 580 x 440mm, white complete with integral foot rests and PVC low level flushing cistern of 10 Litre capacity and PVC flush pipe and including provn of lime concrete bedding including CI 'P' trap 100mm complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity, flush pipe of polyethylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with pillar tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe fancy type and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair CP Bib taps fancy type Chromium plated cast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type fixed complete all as specified and as directed.

S&F CP Stop valves cast copper alloy, fancy type, with long shank and cup, bore15mm, fixed complete all as specified and as directed.

S&F CP angle valves cast copper alloy, fancy type, with long shank and cup, bore15mm, fixed complete all as specified and as directed.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and as directed.

S&F 600mm X 450 mm bevelled edge mirror mounted and fixed with ss screws on walls as in repairs complete all as specified and as directed.

S&F brass Chromium plated shower rose with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing of soap-dish chromium plated (Approximate size 160x160x90mm) complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Dismantling of soil pipe of any description of size 100/110mm dia complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110 mm PVC (SWR) branch piece, (signal T) equal or unequal with access door complete all as specified and as directed.

S&F 110 mm PVC (SWR) vent cowl complete all as specified and as directed.

Dismantling of cast iron drain pipe 75mmdia from floor/walls etc and taking out of trenches/floors complete all as specified and as directed.

S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 75 mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm PVC (SWR) branch piece, (double T) equal or unequal with access door complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement in repair complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.

M & L second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S & F 25mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S & F 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area n.exc 13 sq cm and n.exc 25 Sq cm fixed in repairs complete all as specified and as directed.

S & F stainless steel 100mm butt hinges medium weight cold rolled complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

Dismantling of stone slab of tiles of any description laid bedded and pointed in any mortar complete all as specified and as directed.

M &L granite 20mm thick (of any type) work table robed & polished cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, and half moulded at one side of old stone any type complete all as specified and as directed.

S&F 16 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F in repairs of CPVC pipes20 mm dia SDR 11 & plain CPVC SDR 11 fittings in wall /ceiling or laying in floors taking down old GI tubes complete all as specified and as directed.

S&F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F kitchen plate rack size (900mmx 600mm) made of stainless steel, complete all as specified and as directed.

S&F Rotation moulded PVC water storage tank hoisted and fixed in position 1000 litres capacity incl dismantling existing water tanks complete all as specified and as directed.

S & F 110mm aid PVC (SWR) WC connector with lip ring complete all as specified and as directed.

S & F 110mm aid PVC (SWR) WC connector bend type complete all as specified and as directed.

S & F 75mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

M&L 40mm Thick PCC (1:2:4) type B1 by using 20mm graded stone aggregate as in Floor including necessary form work and finishing the exposed surfaces fair even without using extra cement all as specified and as directed.

M & L for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat pink primer.

M & L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer.

M & L for applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and as directed.

M & L for applying two coats of white wash on ceiling including preparation of old plastered surfaces complete all as specified and as directed.

M & L plain fillets square, rectangular in section sawn secured with nails or brads 2nd class soft wood sectional area n.exc 3 sq cm each complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5m in depth for foundation on manholes etc, and area n.exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar 150mm dia complete all as specified and as directed.

M & L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm dia pipe complete all as specified and as directed.

M & L Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

M&L Precast reinforced cement concrete 1:11/2:3 type A-1 (using 20mm graded stone aggregate) in landings, cover slabs (for manhole etc) including necessary form work and set in CM 1:4 complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately.

M & L for RCC 1:11/2:3 type A1 (20mm graded aggregate) slabs supported on walls, beams, columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the light complete all as specified and as directed.

M & L form work to soffits of suspended slabs such as roof slabs floor slabs landings and similar works n.exc 200mm thick (horizontal or sloping)

S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for columns, hooks ends and binding with Mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Cleaning of Sewage line of 150mm bore including manholes, gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated and translucent sheet etc) sheets in roof covering incl ridges complete all as specified and as directed.

M&L Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified and as directed.

Providing and fixing tiled false ceiling of size(600x600)mm in true horizontal level suspended on interlocking T-24 Grid of hot dipped galvanized corrosion free because of the zinc coating 120GSM sections. It consists of main "T" runner of size 24x32x0.3x3000mm, cross "T" of size 24x32x0.3x1200mm, secondary cross "T" of size 24x32x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. The GI powder coated wall angle24x24x0.4x3000mm fixed along the perimeter of the ceiling to Walls, partitions or columns etc.,with wooden screws at 300mm centers placed at 600mmc/c. is fixed with Rawl Plug 08x45mm creating 1200mmx1200mm grid. Main-T runners 24x32x0.3x3000mm are then suspended at 1200mmc/c from ceiling using 2mm GI wire. The cross T sections of 24x32x0.3x1200 mm is interlocked between the main T at 600mm centre to centre of or magrid of 1200x600mm and then secondary cross "T"24x32x0.3x600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently.

Finally the PVC tiles of size 595x595x8mm having PVC lamination in front side & Aluminium foil back on rear side need to be layed on the above grid frame. The PVC tile has humidity resistance RH 90%, Break strength of>160N, Fire resistance of Class AG3, 8624-1997 and NRC-0.15. Note : Colour of false ceiling shall be approved by GE. (Make Diamond or Equivalent)

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail 600 mm long complete all as specified and directed. Make : Cat No-AQN-7711 of Jaquar or equivalent .

S & F 75mm dia, PVC (SWR) Nahani trap/multi floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and as directed.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) window cills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed.

E/M ITEMS

Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in brick masonry wall / ceiling including continuous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc complete all as specified for the following:-

One light / fan point controlled by one switch.

One three pin switch socket 6 Amps outlet on independent board.

One three pin switch socket 6 Amps outlet on same board.

One light point controlled by two nos of two way switches.

One bell point controlled by one bell push.

Notes:- (i) Wiring from the DB (distribution box) to switch shall be deemed inclusive in the quoted rates. (ii) Sunken modular flush sheet metal enclosures & modular cover plates shall be deemed inclusive in the quoted rates. (iii) Rate quoted shall inclusive of cutting of chases of rqd width & depth incl plastering, making good, painting two coats to match the existing wall.

All as per item No.138 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 16 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and as directed.

Supply and fix Modular switch 1 way 6A , 1-module all as specified and directed.

Supply and fix Modular switch 1 way 16A with indicator, 1-module all as specified and directed.

Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module all as specified and as directed

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module all as specified and as directed.

Supply and fix Modular switch 2 way 6A,1 module complete all as specified and as directed.

Supply and fix Modular Bell push 6A 1 module complete all as specified and as directed.

Supply and fix Bell, Ding Dong AC. 230 volts, single pole complete all as specified and as directed.

Supply and fix power module 240V, 20A complete with 4 module metal flush box, cover plate, Starter, Plug & Socket complete all as specified and as directed.

S & F 3 pin, 6 A, 250 V ceiling rose conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 complete all as specified and as directed.

S & F single pole & neutral, double door, metallic distribution board 12 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 100 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 complete all as specified and as directed.

All as per Item above but triple pole & neutral double door, 4 ways with MCCB as incomer complete all as specified and as directed.

S & F MCB ('B' curve) 6- 32 A, 230 V, 50 Hz, SP for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. with the following rating complete all as specified in IS 732: 2019 complete all as specified and as directed.

S & F RCBOs for earth leakage, overload & short- circuit protection 6-32 A, 230 V, 50 Hz, 2P, 100 mA rating complete all as specified in IS 12640-1 (2008) complete all as specified and as directed.

S & F MCCB, 415 V, 16KA, 4 Pole, 100 Amp complete all as specified and as directed.

M & L for submain wiring using 3 runs of 4 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified in IS 732: 2019 complete all as specified and as directed.

NOTE: Phase & neutral conductors (02 runs), earth continuity conductor (01 run) and PVC conduit (01 run) shall be measured combined as one length complete all as specified and as directed.

All as per Item No. 154.00 above but 6 Sq mm wiring cable complete all as specified and as directed.

All as per Item No.154 above but 1.5 Sq mm wiring cable complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep for Toilet of Md Accn complete including making suitable size hole in wall complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and as directed.

M & L for fixing only in repairs LED batten 20W complete all as specified and as directed.

S & F Electronic type fan regulator modular type suitable for BLDC ceiling fans suitable to work on 230 volts complete all as specified and as directed.

M & L for GI tubing medium grade 40 mm dia concealed on both side walls for hanging ceiling fan and provisioning of hook (3.30m/qtr) complete all as specified and as directed.

S & F TV CO-Axial socket outlet fixed to wall on hylem sheet complete all as specified and as directed.

S & F Rigid non-metallic PVC conduit of dia 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

S & F 20 W (Min 100 Lumen/Watt) surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and as directed. Make:-Philips: BN021CLED20SLED/ Havells: LUMILINENEOBS20WLED865SPCWH/ Wipro: LL20-221-XX-65

All as per Item No. 166 above but 10 W luminous efficacy min 100 lumen/w, rated life 25000 burning hours complete all as specified and as directed. Make:-Philips: BN021CLED10SLED/ Havells: LUMILINEXTBS10WLED865SPCWH/ Wipro: LL20-111-XX-65

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with built in surge protection,polycarbonate diffuser, metal body not less than IP 65,out door type complete all as specified and as directed. Make:-Philips: WT202W LED10SCW PSU S3 PC/ Havells: HEXAFT10W LED857SSY MBOPC/ Wipro: LW07-141-XXX-57-G1

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for B22 type LED bulb complete all as specified and as directed.

S & F LED Bulb 12 W B22, BEE star rated with minimum 5 star rating complete all as specified and as directed.

S & F 35 W security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 110 lumen/Watt, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Make:-Philips: BRP501 LED078 CW R5CPSUS1V1 / Havells: ENDURASUNDOWNSL35WLED765PASYBOPC / Wipro: LR02-671-XXX-57 G1 NOTE: The above rate including security light fittings and GI pipe bracket with all fixing accessories.

Supply & Fix Electric water heater, storage type corrosion resistance enamel coating for inner tank as per OEM and heating element up to 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. All as specified and as directed.

Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funnel and wire mess, including GI pipe of 15 dia for earth lead protection complete all as specified and as directed.

Note :- The rate is deemed to be inclusive of the cost of earth work, excavation on any type soil and removal of surplus soil to a distance of 50 Mtrs, PCC 1:2:4 type B1 for earth pit cover 6 Nos 6 mm dia CTD bar on both direction, earth lead protection GI pipe medium grade with suitable size from earth plate electrode to main switch, GI wire length up to 7.50M will be measured as one unit)

Taking down existing unserviceable Distribution boards with MCB's & MCCBs of any size and any size and any type complete all as specified and as directed.

Taking down existing submain wiring of any size or any type complete all as specified and as directed.

Taking down existing earthing with GI Wire/Strip complete all as specified and as directed.

M & L for fan hook made out of 40 x 6 mm MS flat Iron suitable for hanging Ceiling fan on & including 40 mm dia GI pipe medium grade of required length, nuts, bolts, washers etc. complete all as specified and as directed.

M & L for taking down ceiling fan, dismantling blades complete and deposited to MES yard complete all as specified and as directed.

M & L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M & L for point wiring complete all as specified with 1100 volts grade 1.5 sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and inclduing PVC rigid conduit medium grade of size minimum 20mm with all accessories surface on wall/ ceiling including continous earth wire 1.5 sqmm PVC insulated FR-LSH unsheathed 1100 volts mutlistranded copper conductor connected to common earth and earth dolly including modular PVC boxes on walls and modular white plate covers with frame for mounting of modular switches/ sockets/ fan regulatrs etc complete all as specified for the following:-

One light / fan point controlled by one modular switch.

One three pins switch socket 6 Amps outlet on independent modular board

One three pins switch socket 6 Amps outlet on same board

One light point controlled by two nos of two way modular switches.

One bell point controlled by one modular bell push.

All as per item No. 181 here in before but with cable 4 sqmm mutli stranded copper FR-LSH wire, 1100 volts grade, unsheathed for one 3 PIN socket outlet 16 Amps on independent board on surface of wall including continuous earth wire PVC insulated 4 sqmm coppr stranded conductor FR-LSH, 1100 volts grade connecting to common earth and earth dolly complete all as specified and as directed. Notes:- (i) Sub main from the DB to switch and point wiring from switch board to fitting/ fixtures shall be deemed incluvise in the quoted rates. (ii) PVC Modular boxes/ enclosures & Modular cover plates shall be deemed inclusive in the quoted rates

SAI RUPA CONSTRUCTIONS (BID ID -3294160)

M/S GDR CONSTRUCTIONS (BID ID -3297921)

ASHOK CONSTRUCTION (BID ID -3302795)

SRICO PROJECTS PVT LTD (BID ID -3297794)

P Govinda Reddy Infrastructure (BID ID -3293595)

Sai construction & services (BID ID -3297722)