ADDN/ALTN OF ROOF AND JOINERY, PROVN OF NEW BAEEACK STORE, GALVALUME SHEET AT PARKING AND UPGRADATION OF CERTAIN SMQs AT 4AFSB UNDER GE AF GORAKHPUR

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 30cm deep and getting out in soft loose soil complete all as specified and directed at site.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft and loose soil complete all as specified and directed at site.

M&L for PCC (1:4:8) type D-2 using ( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete complete all as specified and directed at site.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for RCC Design mix Type A1 1:11/2:3 (20mm graded aggregate) as in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed at site.Note : Cement content not less than 410 Kg /Cum

M&L for RCC Design mix Type A1 1:11/2:3 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts. Complete all as specified and directed.Cement content not less than 410 Kg /Cum

M&L for RCC Design mix Type A1 1:11/2:3 (20mm graded aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span . Complete all as specified and directed.Cement content not less than 410 Kg /Cum

Formwork to flat rough finish surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to atter.Complete all as specified and directed.

Formwork to flat rough finish surface of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and directed at site.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, Complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions (WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make :- Dr Fixit Pidiproof LW+ or equivalent in specified make complete all as specified and directed at site.

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plaster surfaces of wall and applying three coats of White washing complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of primer on newly plastered wall surfaces incl preparation complete all as specified.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc .15cm thick, spread, levelled and rammed including watering. Complete all as specified and directed.

M&L for Hardcore of broken bricks guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M&L for 100 mm thick cement concrete Type B-2 (1:2:4) using( 40mm graded stone aggregate ) as in sub base of floor compete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile all as specified and directed by Eng-in-Charge.

M&L Machine cut kota stone slab flooring 20-25mm thick over 1:6 cement screed 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed at site. (joint thickness not to exceed 1mm)

M&L for rendering 10mm thick in CM 1:3 CM for dado / skirting on brick work finished fair and smooth for receiving tiles in vertical surfaces all as specified and directed

M&L Kota stone slab 20-25mm thick in, skirting laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed at site.

M&L for glazed ceremic coloured tiles chips 7mm thick of different size and colour in vertical/slopy plastered surfaces of over head dome set and jointed and in neat cement slurry and pointed in white or coloured cement to match including all necessary safety precaution with steel propss scafolding/shuttering etc complete all as specified and directed by Engr -in -charge.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified as directed

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-2, using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement concrete surface even and smooth including forming construction joint 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed

M&L for steel work in tubular post/trusses including special shaped washer, hollow section, angle iron, flat iron for fixed independently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attachment and curved shaped by welding making jointless by filling including cutting etc conforming to IS 1161-1979 grade St-240 including work as directed by Engr-in - Charge complete all as specified and directed.

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for pre-painted galvatume aluminium zinc coated GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roofing covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall and making eaves gutter, fixed with gutter self tapping screws complete all as specified and directed

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F for PVC (SWR) bends any radius for 110 mm bore provided with access door complete all as specified and directed at site.

S&F Steel rolling shutters of 1.25 mm thick lath , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete as specified.

Dismantling floor, hearth or wall tiling/Stone slab including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed at site.

Dismantling Asbestus cement (corrugated semi corrugated,etc sheets in roof coverings, Complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for . Complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed

M&L plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed .

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / loose soil complete all as specified and directed .

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and as directed .

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch complete all as specified and as directed ..

All as per item No 44 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and as directed .

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L for Modular socket outlet 2/3 pin combined 2 module, 6 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.

M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge.

M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.

Supply and fixing MCB single pole(SP) 240 volt C curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one complete all as specified & directed..

Supply and fixing MCB single pole & neutral(SPN) 240 volt 'C' curve 10 KA 32 Amps complete all as specified and directed incl taking down old one complete all as specified & directed.

Supply and fix exhaust fan made of steel body complete with louvers shutters , 450 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements,connecting/testing and including making hole of suitable size in brick wall including make good the disturbed surface complete all as specified & directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.00 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified & directed.

Supply and lay in trenches or passing through pipe XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 10Sqmm 2 core complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers of 23 cm thick( 8 Cm before laying the cable and 15 Cm thick after laying the cable) in trenches complete all as specified and directed.Note :- Only Puned down volume shall be measured.

Supply and lay burnt best quality locally available old size sub class 'B' bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well remmining in layers not exc 25 cm.complete all as specified and as directed

Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed

PANDEY TRADERS (BID ID -3381170)

H AND Y GROUP (BID ID -3381721)

L.K.R.TIWARI CONSTRUCTION (BID ID -3381771)

H R ENGINEERS (BID ID -3381507)