Providing air conditioning unit for positive pressure and negative pressure in isolation room of ICU, 6th floor AIIMS Patna

SITC OF Double Skin PUF insulated AHU Ceiling Suspended of Following capacity with 2row cooling coils of following capacity with required Fins to maintain an inside temperature of with 3 row deep chilled water cooling coil and 2 row deep heating coil complete with pre -filter , micro filter , and HEPA filter , UV irradation system , ss drain pan , blower , motor sufficient , thermostat , ball valve set for inlet with strainer and out let , 3 way valve and required copper connections and supply air grill 125mm static pressure etc as required. ( Make- Waves, perfect,edgetch,fanair,Zeco,Ravi aircon) 3.00 TR

SITC OF Double Skin PUF insulated AHU Ceiling Suspended of Following capacity with 2row cooling coils of following capacity with required Fins to maintain an inside temperature of with 3 row deep chilled water cooling coil and 2 row deep heating coil complete with pre -filter , micro filter , and HEPA filter , UV irradation system , ss drain pan , blower , motor sufficient , thermostat , ball valve set for inlet with strainer and out let , 3 way valve and required copper connections and supply air grill 125mm static pressure etc as required. ( Make- Waves, perfect,edgetch,fanair,Zeco,Ravi aircon) 3.5 TR

SITC of EXHaust Air Double Skin Construction Inline Fan 300-400 CFM with sufficient Static Pressure of at least 125mm complete with pre ,micro and HEPA filter Bank, motor blower for Extracting infections air out side the Building with Flexiable metal G.I ducting up to 10 mts of 150mm Dia etc as required

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. 54 DELHI SCHEDULE OF RATES (E&M) 2018 Item No. Description Unit Rate Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 32 mm dia (50mm thick insulation)

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required Thickness 0.63 mm sheet

Supplying and laying following size PVC insulated and FR PVC Round Sheathed, Copper Conductor cable of grade 1.1 KV iu/c providing cooper lugs etc as reqd a) 4 core 6sqmm

Supplying and laying following size PVC insulated and FR PVC Round Sheathed, Copper Conductor cable of grade 1.1 KV iu/c providing cooper lugs etc as reqd b) 4 core 16sqmm

Civil Work Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer?in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.