PROVISION OF CERTAIN MINOR WORKS AT 8FBSU

B/R PORTION

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets on any description, any thickness, including cover fillets, complete all as specified and directed by Engineer-in-Charge.

S&F of Elegant Tile made of perforated cement fibre composite 595x595/295 X1195/595 X1195x5mmcovered with absorptive microfiber coating on the front side and Acoustics fibre on the back side, water resistance, fire resistant absorption coefficient upto0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results, as in false ceiling fixed to metal frame complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats of frames of any description exc 1.50 Sqm but n.exc 4.00 Sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed by Engineer-in-Charge.

S&F for Powder Coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. Note : Shade of Powder Coating must be decided by Engineer-in-Charge.

S&F for Powder Coated anodised aluminium door shutters (with Sliding Mechanism), aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, with sliding arrangements, and locking mechanism, anodised aluminium snap beading screws etc. complete all as specified and directed by Engineer-in-Charge. Note: Shade of Powder Coating must be decided by Engineer-in-Charge.

S&F for 4.00 to 4.80mm Sheet glass, ordinary quality and glazing with oil putty in square/ rectangle in shape of any size as per site requirement in each pane fixed to aluminium framework by necessary means complete all as specified and directed by Engineer-in- Charge. Note: No extra Cost will be paid to contractor If any design/logo required over glass required after approval of Engineer-in-Charge.

S&F for Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

S&F of 2nd class hard wood 30mm to 35mm thick, plain framed, panelled door shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats all as specified & directed.

S&F of 2nd class hard wood 30mm thick glazed & skeleton shutters for windows, open rebated & prepared to receive glass/ gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of member of shutters as specified in SSR Part-1 Sec 8 Clause 8.24(b) supplied and fitted to chowkats all as specified.