PROVISION OF GRILL COVER FOR OPEN DRAINS ALLONG WITH MAIN ROAD AT NEW OTM COMPLEX AND ADDITION/ ALTERATION TO ROOF COVERED PASSAGE TO BAY VIEW HUT AT OLD OTM COMPLEX AT DIGLIPUR

Amount

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required in superficial area exceeding 400 sq. cm but not exceeding 0.10 sq.m.

S&F rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410- W(Gde-E-250) quality-B.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L PCC 1:2:4, type B1 (using 20 mm graded granite stone aggregate) as in embedded posts, walls, lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, levelling course, kerbs water troughs and the like including use of form work, weathering, slightly rounded or chamfered angles and throating.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L preparation of new or previously untreated steel surfaces of any description, not exceeding 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern (FRP) roof coverings.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L preparation of old painted surfaces steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 mtr and making good surface.

M&L for PCC Type B2, 1:2:4 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

Fixing only fluorescent tube light fitting decorative strip type (patty type)1x28 wT5, 230v, with electronic ballasts, bipin holder, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

M&L for supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 4 sq. mm nominal cross section in service connections.

Fixing only Pendant ordinary, comprising ceiling rose, brass with insulated body lamp holder, cord grip pattern, and 0.5 sq.mm copper flexible twisted twin cord up to 1.5m length as ordered

B.R. ENTERPRISES