Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC 296 SECTOR 15 PANCHKULA HARYANA | L1 | Accepted-AOC Accepted | |
| 2 | L2₹7.5 L+₹3,750 (0.50%)Rejected-AOC 262 1 NEAR MANAV CHOWK NEW GRAIN MARKET AMBALA CITY HARYANA HARYANA 134003 | AMBALA | HARYANA | 134003 | L2 | Rejected-AOC Rejected |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
4 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
GE (U) Chandimandir Pin-134107
GE(U)/CHM-50/2023-24 ROUTINE MAINTENANCE OF SWIMMING POOL AND OTHER CONNECTED ITEMS UNDER GE (U) CHANDIMANDIR
2024_MES_648165_1
GE(U)/CHM-50/2023-24
Open Tender
Miscellaneous Works
Item Rate
240 days
Chandimandir
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
GE (U) Chandimandir
₹20,000
Yes
20 Sept 2024
28 Mar 2024
8 Jun 2024
28 Mar 2024
4 Jun 2024
21 May 2024
Amount
Taking up or down CPVC/UPVC/PVC pipes 100/150 mm bore including inlet valve removing from site (including all fittings) complete all as directed.
Supplying and laying of CPVC Schedule 80 pipes and plain CPVC Schedule 80 fittings 100 mm inner diameter and laying in wall/ceiling or laying in floor complete all as specified and as directed.
Supplying and laying of CPVC Schedule 80 pipes and plain CPVC Schedule 80 fittings 150 mm inner diameter and laying in wall/ceiling or laying in floor complete all as specified and as directed.
Supplying and fixing in repair of CPVC Butterfly valve handle type 160 mm Diameters complete all as specified and as directed.
M & L for removal of existing unserviceable filter media from filter bed of bobbin wound filter 2000 mm diameter and disposal of unserviceable media/material from each filter bed to a designated place, distance not exceeding 500 mtr including dismantling of existing air blow-down piping system, dismantling of AC lateral pipes and header block tees, nozzles etc, cleaning and disinfection of entire internal surface of the filter bed using a suitable cleaning agent/bleaching powder, scrubbing the side walls to remove any form of deposit using a wire brush complete all as specified and directed.
M & L media comprising of filter sand of particle size 0.4 mm - 0.8 mm bulk density loose: 1400 kg/m³ to 1700 kg/m³, in accordance with IS: 8419 Part 1, specific gravity not less than 2.5, uniformity coefficient less than 1.5, silica content tested in accordance with IS: 2000 for filling in pressure filters complete all as specified and directed. Note: (a) Any sample of filter sand shall not contain more than 5 percent by volume of impurities, such as clay, loam, silt. (b) Loss in Ignition not more than 0.70%, Acid solubility not more than 5.00 %, Effective size (d10) with a maximum deviation of 10%, Uniformity coefficient (Uc) shall be less than 1.5.
M & L only media comprising of filter gravel of particle size 1.0 mm-2.0 mm, bulk density loose: 1400 kg/m3 to 1700 kg/m3 in accordance with IS 8419 Part 1, specific gravity not less than 2.5, uniformity coefficient less than 1.5, Silica content tested in accordance with IS: 2000 filling in pressure filters complete all as specified and directed. Note: (a) Any sample of filter gravel shall not contain more than 5 percent by volume of impurities, such as clay, loam, silt. (b) Loss in Ignition not more than 0.70%, Acid solubility not more than 5.00 %, Effective size (d10), With a maximum deviation of 10%, Uniformity coefficient (Uc) shall be less than 1.5.
Disconnecting the Electric and pump connection from unserviceable Motor of capacities 10/15HP, 3 phase 415 volt and transporting to workshop for rewinding the motor dismantling, cutting and removing the burnt windings from the motor, cleaning the core, removing all carbon by chemically and rewinding with existing size/gauge of super enameled/copper wire and other approved insulating materials, heating, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall be deemed to inculde the same. (ii) After assembling, rewinded motor shall be checked for no load current and full load current all as directed. (iii) Replacement of unserviceable parts will be measured and paid in respective items.
Supply and replacement of Ball bearing for 10/15 HP motor complete all as specified and as directed by Engineer-in-Charge.
Supply and replacement of Motor terminal box of sizes for 10/15 HP motor complete all as specified and as directed by Engineer-in-Charge.
Supply and replacement of Shaft key of sizes for 10/15 HP motor complete all as specified and as directed by Engineer-in-Charge.
Disconnecting Recirculating pump having discharge capacity 127M³/Hr at 15 mtr head from its existing foundation bed to the place (inside/outside building) where directed, dismantling the pump carefully, checking and segregating serviceable and unserviceable parts, cleaning serviceable parts thoroughly by approved method parts like impeller shaft,bearing. Replacing unserviceable parts by new ones as required for pump . Reassembling installing to its existing foundation, commissioning, testing and connecting up including painting the pump foundation with two coats of synthetic enamel paints and marking SM,MES No, or Sl No complete all as directed. Note : Replacement of unserviceable parts will be measured and paid in recpactive tiems.
Supply and replacement of Ball bearing No-6309 for Recirculating pump having discharge capacity 127M³/Hr at 15 mtr head complete all as specified and as directed by Engineer-in-Charge.
Supply and replacement of Shaft for Recirculating pump having discharge capacity 127M³/Hr at 15 mtr head as per manufacturer's design complete all as specified and as directed.
Supply and replacement of Shaft key for Recirculating pump having discharge capacity 127M³/Hr at 15 mtr head as per manufacturer's design complete all as specified and as directed.
Supply and replacement of cast iron Impeller for Recirculating pump having discharge capacity 127M³/Hr at 15 mtr head as per manufacturer's design complete all as specified and as directed.
Supply and replacement of unserviceable pump shaft sleeve made of gun metal for Recirculating pump having discharge capacity 127M³/Hr at 15 mtr head as per manufacturer's design complete all as specified and as directed.
Supply and replacement of stuffing box bush for Recirculating pump having discharge capacity 127M³/Hr at 15 mtr headas per manufacturer's design complete all as specified and as directed.
Supply and replacement of unserviceable check nut for Recirculating pump having discharge capacity 127M³/Hr at 15 mtr headas per manufacturer's design complete all as specified and as directed.
Remetalling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.
Disconnecting the Electric and pump connection from unserviceable Motor of capacities 2.5/3HP, 3 phase 415 volt and transportating to workshop for rewinding the motor dismantling, cutting and removing the burnt windings from the motor, cleaning the core, removing all carbon by chemically and rewinding with existing size/gauge of super enameled/copper wire and other approved insulating materials, heating, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall be deemed to inculde the same. (ii) After assembling, rewinded motor shall be checked for no load current and full load current all as directed. (iii) Replacement of unserviceable parts will be measured and paid in respective items.
Supply and replacement of Ball bearing for Motor of capacities 2.5/3HP complete all as specified and as directed by Engineer-in-Charge.
Supply and replacement of Motor terminal box of sizes for Motor of capacities 2.5/3HP complete all as specified and as directed by Engineer-in-Charge.
Supply and replacement of Shaft key of sizes for Motor of capacities 2.5/3HP.
Material & Labour for servicing, greasing of suction sweeper pump including replacement of damaged delivery PVC pipe and fitting and Nylon Brushes for Suction Sweeper = 8 Nos complete all as specified and as directed by Engineer-in-Charge.
M & L for Repairing/fabrication of Suction sweeper trolly made of MS channel with cuting of rusted part and fitting MS channel by gas welding including painting with two coats enamel paint complete and replace Wheel for Suction sweeper trolley = 04 Nos all as directed.
Supply & fixing as in replacement PVC nylon braided helical pipe 40mm dia (flexible) suitable for suction sweeper and pumping set complete all as approved and directed by Engineer-in-Charge. Make: Jyoti/Modigold/Laxmi
Supply and fixing 40 mm dia twisted nylon rope best quality complete all as specified and directed as per approved sample.
Supply and fixing Curved Brush of 18 inch size and made of ABS and nylon fibre bristles complete all as specified and directed Make:- ION EXCHANGE/ CANDY/ AQUANOMICS
Supply and fixing Leaf Rack with Aluminum Frame complete all as specified and as directed by Engineer-in-Charge. Make:- ION EXCHANGE/CANDY/AQUANOMICS
Supply and fixing Telescopic Pole for cleaning of the swimming pool, of 4.8 Mt in length, MOC- Aluminum complete all as specified and as directed by Engineer-in-Charge. Make:- ION EXCHANGE/ CANDY/ AQUANOMICS
Supply & fixing as in replacement Automatic liquid chlorine dosers having FRP/HDPE type tank of capacity of 200 ltrs fitted with electronic diaphragm pumps with level sensors ,stroke variable feature, capacity of 0- 16LPH flow rate at an injection pressure 5Kg/Sqcm the tank is fitted with PVC/glass tube level indicators as per maunfacturer's design complete all as specified and as directed by Engineer-in-Charge. Make:- ION EXCHANGE/ CANDY/ AQUANOMICS
Supply and laying / fixing flat 3 core 10 Sqmm multistranded PVC insulated & PVC sheathed copper conductor cable, 1100 volts confirming to IS 694:1990 with ISI marking including connection with motor, starter with appropriate size of copper thimbles including taking out existing unserviceable cable complete all as specified and directed.
Supply and fixing as in replacement 2.5 Sqmm 3 core PVC sheathed copper conductor cable incl accessories complete all as specified and directed.
Supply and fixing as in replacement foot valve of size 50 mm of PVC material for fixing in suction sweeper along with necessary cutting and grooving all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement Soft Starter for 10/15 HP Motor 3 phase, 50 Hz, 415 V, Icl current rating 45 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 10 kW motor, complete all as specified and directed.
Supply and fix in replacement DOL Starter for 5 HP Motor with easily replaceable heavy duty fixed and moving contacts and coil voltage between 240-440 Volts made up of stainless steel body, complete all as specified and directed.
M&L for periodical Servicing of motor pumps of capacity 10 to 15 HP which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed
M&L for periodical Servicing of motor pumps of capacity 2.5/3 HP (Suction Sweeper Motor) which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed
Taking out, 200 mm bore sluice valve top cover, spindle and broken / unserviceable check nut (gutka) carry to workshop & refixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nut, bolt,Spindle ,check nut and washer of existing size complete all as specified and directed.
Taking out, 250 mm bore sluice valve top cover, spindle and broken / unserviceable check nut (gutka) carry to workshop & refixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nut, bolt,Spindle ,check nut and washer of existing size complete all as specified and directed.
Supply and fix as in replacement cast iron flanged sluice valve of 200 mm bore 1.6 PN installed complete with ISI marked (IS-14846) with gun metal spindle and hand wheel all as specified and directed by EIC.
Supply and fix as in replacement cast iron flanged sluice valve of 250 mm bore 1.6 PN installed complete with ISI marked (IS-14846) with gun metal spindle and hand wheel all as specified and directed by EIC.
Supply and fixing as in replacement 200 mm bore CI double flanged Non return valve class "B' High pressure PN 1:6 ISI marked including bolts, nuts, washer and jointing materials etc complete all as specified and directed.
Supply and fixing as in replacement 250 mm bore CI double flanged Non return valve class "B' High pressure PN 1:6 ISI marked including bolts, nuts, washer and jointing materials etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position below and above ground level complete all as specified and directed.
M&L for brick with sub class B brick straight or curved on plain exc 6 Mtr mean radius built in cement mortar 1:4 including dismantling of old brick work complete all as directed
M&L for PCC 1:2:4 type B1 using 20 mm stone aggregate as in copping/support both including necessary form work etc complete all as directed
M&L for rendering 15mm thick on fair face of brick work in CM 1:4 finished even and smooth complete all as specified and directed.
M & L for framed work Fe - 410W (Gde E-250) for valve pit chamber cover made of MS equal angle and MS sheet 3 mm thick including welding, cutting, hinges, locking arrangments including painting complete all as specified and directed.
S & F MS Clamp Fe - 410W (Gde E-250) for any dia of CI / GI pipe complete all as specified and directed.
M/L Cutting for existing road/PCC for passing pipe and making good the disturbed surfaces by using 1:4:8( in foundation )type D-2 ( using 40mm graded crushed stone aggregate) as in mass concrete average width and depth of cuttings shall be 300mmX450mm complete all as specified .
Supplying, laying, jointing, commissioning and testing as in replacement of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 150 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed.
S & F ductile iron pipe fittings such as bends, tapers, tee pieces single branch, "Y" junction, collars, caps and plugs etc spigot socketed or flanged ends type of size up to 300mm nominal bore conforming to IS-9520/2000 with pressure rating PN-1 (all the fittings shall be coated for rust prevention i.e. external coating zinc rich paint with finishing layer of bituminous as per Annexure - A of IS:9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure 'B' of IS-9523/2000) complete all as specified and directed by Engineer - in - Charge. Note: (i) Excavation and earth work shall be measured and paid for separately.
Cutting to existing CI/DI pipe line of size 200 mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note : (i) Fitting will be measured and paid separately under respective items.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and n.exc 10 sqm on plan for foundation etc or for laying pipe lines and cables etc and getting out as in any type of soil complete all as specified and dirrected.
Returning, filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in any type soil, complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Supplying and fixing in repair of PVC Flange for Butterfly valve handle type 160 mm Diameters complete all as specified and as directed.
Repairs to existing Brick masonary valve pit of internal size 1200x1200x1000mm as per following:-(a) Replacement of MS sheet cover with 3.0 mm thick MS sheet with hinge & Locking arrangement and S&F 25x25x6 mm angle iron frame all around the MS cover by welding.(b) Complete plastering work work to be taken down and to be plastered 15 mm thick in cement mortar (1:6) including WPC (c) Demolition of floor & M&L 100 mm thick PCC (1:2:4) type B1 (d) M&L painting on MS cover & frame with two coat of red oxide primer after necessary prepration of surfaces all as specified and directed
Alpha Engineers and Builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .