Repair to Security wall, Drain, Path, Hardstanding, Fencing, Gate, Sewage line and Misc work at ALG, GNR and Kasubegu under GE (East) Ferozepur Cantt.

Amount

Dismantling posts or struts (wood, steel or RCC) any section,including taking out embedded portion and making good disturbed natural ground complete all as specified and directed.

Excavating in post holes(or similer holes)each n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified and directed.

S&F Hand rails,half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wires, etc, flat iron fillets(for securing wire mesh etc.) including all necessary drilling,bolting or riveting etc.and similer work conforming to Fe-290 Gde E-165 (For Fencing) complete all as specified and directed.

S&F in repair Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long diameter of the neck in 5 to 10 mm complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over,cut to length, bent to shape required, complete all as specified and directed.

S&F in Repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

S&F GI chain link fancing 100 mm diagonal mesh size of 2-3 mm dia wire fixed angle iron fencing post including prov. of binding wire and dismantling fencing wire mesh,any type.(for Chain link Fencing) complete all as specified and directed.

M&L for cement concrete type B0 1:2:4 using 12.5mm graded stone aggergate in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands or beams, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rouinded for chamfered angles throating & formwork and incl Demolition of reinforced cement concrete in any position complete all as specified and directed as EIC.

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & no pigment complete all as specified and directed by Engineer-in-charge.

M&L Cement concrete type D-2, 1:4:8 in foundations, filling and mass concrete including demolition cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L Chequered cement concrete coloured tiles 30 cm x 30 cm x 22 mm thick using grey cement and no pigment set over & including 15 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick complete all as specified and directed.

M&L for Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling plain or corrugated AC sheet on roof covering complete all as specified and directed.

M & L for non skid coloured ceramic endura tiles heavy duty for outdoor 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over include 15 mm thick cement screed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

Dismantling wrought iron work or mild steel work of any description and S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius including demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

Demolition of brick work built in cement mortar of any specification and in any position and using old bricks in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius retrieved from dismentling including cleaning and removal of mortar from old bricks complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) & Preparation of new plastered surfaces and applying two coats of white wash complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of white wash complete all as specified and directed.

M & L for providing precast cement concrete louvers and jalies, 25 mm thick type B0 1:2:4 (12.5mm graded aggregate) (measured solid), Set in CM 1:4 including all moulding but excluding frames complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fix to wall or laid in trenches including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 75mm dia PVC (SWR)with access door bends and T of any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR)with access door bends and T of any radius complete all as specified and directed.

Demolition and breaking up 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 100mm internal dia SWG drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for 1:3:6 type C2 cement concrete bed to drain pipes including paving under and haunching against the sides of pipes afrter they are laid and tested in 100 mm bore at pipe complete all as specified and directed.

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 150m dia SWG drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for 1:3:6 type C2 cement concrete bed to drain pipes including paving under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore at pipe complete all as specified and directed.

M&L for cement concrete type B-2, 1:2:4 using 20mm graded aggregatr in surface channels and drains complete all as specified and directed.

M&L for excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for fdn n. exc 10 sqm on plain and n. exc 1.5m in depth and getting out soft/loose solil complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces (finished even and smooth without using extra cement complete) complete all as specified and directed.

M&L for removing excavated soil n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

M&L for returning, filling in inluding spreading, levelling, watering and well ramming in layers n. exc 25cm complete all as specified and directed.

Demolition of reinforced cement concrete in manhole cover slabs n exc 15 cm thickness complete all as specified and directed.

M&L for providing precast cement concrete type B-1 1:2:4 using 20mm graded aggregate in manhole cover including necessaryh form work excluding reinforcement and set in CM 1:4 complete all as specified and directed.

M&L for mild steel TMT bar 8 mm dia, cut to length, bent to shape required includidng cranking, bending for hooping complete all as specified and directed.

M&L for cleaning of existing sewage line exc 100 mm and n. exc 200 mm internal dia at any depth incl manholes by removing the manholes covers of any type/ size and cleaning by means of hydraulic jet pressure mechine/ manually bamboo rodding as required at site from manholes and well flushing with water after cleaning incl getting out sledge if any and liqued materials from connecting manholes diposited in sewer line and removing the solids and sludge to any distance and reinstating the manhole covers in its original position as diretced by Engr - in - Charge Note:- (i) Excavation and earth work included in unit rate (ii) Cleaning of existing sewage pipe line / manholes by suitable suction pump loaded vehicle / trailers / manually by bamboo rodding available in the market and depose effluent out side the defence land. the shall be included in the quoted rate.

M&L for Complete cleaning and removing blockage from WC to first manholes, nahani/floor traps to gully trap and from gully trap to first manholes by well flushing with adequate water, including opening and refixing gully trap covers excess doors of junctions/ bends with bolts are cement joints as per site conditions from any dia and type of pipes and fittings complete all as directed (Cleaning from WC to Ist MH, NT to GT and GT to MH shall be treated as separate units complete all as specified and directed. Note:- For manual Cleaning Minimum 06 Nos of Labours with one site supervisor for collection and disposal of complaints to JE till contract period shall be including the quoted rates.

Removing the manhole covers (CI or RCC) any type or shape and desludging / dewatering of septic tank,Manhole and soakage well of upto 1.5mtr depth by mechanical pumping/ manually by plugging inlet as required, making it fully functional to the entire satisfaction of Engr -in- charge including carrying the effluent and reinstating the manholes cover to its original position complete all as specified and directed. Note:- Cleaning of septic tank/ soakage wells/ manholes by suitable suction pump loaded vehicle / trailers available in the market and dispose effluent out side the defence land that shall be including the quoted rates. Note:- For manual Cleaning Minimum 06 Nos of Labours with one site supervisor for collection and disposal of complaints to JE till contract period shall be including the quoted rates.

PREM KUMAR BANSAL