GE (N) P/T- 100 OF 23-24 SPL REP TO SEWAGE LINE SEPTIC TANK AND MANHOLE TO HQSC CESC, MSSC SFC KOHIMA LINE AND LAYING SEWAGE PIPE LINE CONNETING TO MAIN LINE OUTSIDE HQ RTG FROM OTM /OR LIVING ACCN IN THE AREA OF AGE B/R (c) UNDER GE (NORTH) PUNE

Amount

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in hard/ dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated soil to distance exceeding 1.5Km and not exc. 5Km and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

M&L Demolition and breaking up 100mm dia drain pipes (salt glazed, stone ware, AC or reinforced concrete) set in cement mortar complete all as directed.

-Ditto-- as per Sl Item No 05 but of 150mm dia

-Ditto-- as per Sl Item No 05 but of 200mm dia

-Ditto-- as per Sl Item No 05 but of 300mm dia

M&L for PCC type D-2,1:4:8 (using 40mm graded stone agg) as in foundations, filling and mass concrete including demolition of existing complete all as directed

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including including packing under, and haunching against the sides of pipes after they sre laid and tested for 100mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including including packing under, and haunching against the sides of pipes after they sre laid and tested for 150mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including including packing under, and haunching against the sides of pipes after they sre laid and tested for 200mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including including packing under, and haunching against the sides of pipes after they sre laid and tested for 300mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 100 mm internal dia of pipe complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 200 mm internal dia of pipe complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 300 mm internal dia of pipe complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B2 (using 40mm graded broken stone aggregates) as in surface channel and drain including forming fair finished drain or channel any girth, using extra cement, including forms, moulds, mitred/stopped ends etc. including demolition of existing concrete complete all as specified and as directed.

Material and labour in repair for 100mm bore RCC pipes, class NP2 laid and jointed with collars and tested, set in cement mortar complete all as specified and as directed.

Material and labour in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested, set in cement mortar complete all as specified and as directed.

Material and labour in repair for 200mm bore RCC pipes, class NP2 laid and jointed with collars and tested, set in cement mortar complete all as specified and as directed.

Material and labour in repair for 300mm bore RCC pipes, class NP2 laid and jointed with collars and tested, set in cement mortar complete all as specified and as directed.

Demolition of brick/Block/Stone Masonry built in cement mortar and rubbish off the premises complete all as specified and directed.

Material and labour for brickwork with fly ash old size bricksbricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces mixed with liquid water proofing as per manufacturer's instructionwith, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only liquid waterproofing will be measured and paid separately).

Material labour for RCC (1:1½:3) type A-1 (nominal mix), (using 20mm graded broken stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, septic tank slab, shelves and the like including demolition of existing RCC complete all as specified and as directed.

Material and labour for formwork to soffits and edges of suspended slabs such as roof slabs, floor slabs, landings, cover slab of septic tank and similar work not exc. 200 mm thick for fair finished flat surfaces of concrete all as specified and as directed.

Material and labour for Cement concrete (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping, benching, bed blocks, lintels upto 1.5m clear span and the like including including weathering, slightly rounded or chamfered angles and throating, using necessary form work including demolition of existing concrete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

Material and labour for precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in cover slabs for manholes etc. with plain faces including necessary form work, set in CM 1:4 including demolition of existing concrete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 450mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 600mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 600mmX600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare includingreinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

M&L for Loose filling with brick bats of gauge 80 to 150 mm in soakage pits, soakage including taking out outlived/ worthless material/ brick bats and removing the same where directed.

M & L Loose filling with aggregates of gauge 80 to 150 mm of broken bricks in soakage pits, soakage including taking out outlived/ worthless material/ brick bats and removing the same where directed.

Taking out semi solid, liquid suspension sludge and foreign material from man hole/ septic tanks/ soakage well of any description and any depth including sucking/ pumping of water with pump set and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself).

Cleaning/clearing & Maintanance of sewage lines including CI/PVC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain exceeding 150mm and not exceeding (but including) 200mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Cleaning/clearing & Maintanance of sewage lines including CI/PVC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain exceeding 200mm and not exceeding (but including)300mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal/ Tee for 75mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.

Material and labour in repair for PVC (SWR) gully trap 125/ 110 setting and jointing with solvent cement complete all as specified and as directed.

Taking down cement plaster on brick/ block/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors with all fittings and connections complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.

Fixing only for 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors tubing with all fittings and connections complete all as specified and as directed.

Dismantling of stone slabs,cudappah, paver blocks of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection/court yard finishing the surface even and smooth without using extra cement including demolition of existing complete all as specified and as directed.

Material and labour 40mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in floor top finished even and smooth without using extra cement complete all as specified and as directed.

M & L Glass dividing strips, width of strip 38mm, 3 mm thick , inserted in position, conform to design complete all as per specified and as directed.

Material and labour for coloured, exterior parking (Heavy duty) tiles of size 300mm x 300mm x 8 to10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. Make: RAK/ Johnsun Endura or equivalent of Kajaria/ Somani as approved by GE.

M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L Machine pressed rubber moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS- 15658-2006 of 60 mm thk, M35 gde in floor/ pavment laid over and including 30mm thick crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. Note- (i) Manufacturer test certificate shall be submitted along wth Sample.

- Ditto- as per item no 68 but except Paver Blocks

Material and labour for removing of plants, bushes, weeds with roots tree grown from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , behind CI pipe, waste water pipe, bends, shafts etc. by chiseling carefully without damaging the structure and making good and filling the disturbed area including toothing, bonding and plastering with cement mortar 1:3 or cement concrete (1:1.5:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings and applying chemical treatment with GLYPHOSATE 41% complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

Material and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Material and labour for precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in cover slabs for manholes etc. with plain faces including necessary form work, set in CM 1:4 including demolition of existing concrete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s Akshay Contruction

J P ASSOCIATES

K.S.JITE AND SONS

M/S Eknath agencies