SPL REPAIR TO EOT CRANE AND CONNECTED ACCESSORIES PROVN OF TOILET AND BATHROOM NEAR COOK HOUSE 17 MTN DIV ORD UNIT 02 X LOADING AND UNLOADING PLATFORM AT AP5 MILE PROVN OF LIVING SHELTER AT LOWER SWASTIK OF 341 FD REGT AND CERTAIN MINOR WORK AT OLD

Amount

M&L for surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft loose soil etc .

M&L for excavation in post holes each n.exc. 0.5cum getting out & returning filling in soft loose soil and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm etc.

M&L for type D2 1:4:8 (40mm graded stone aggt) in foundation etc all as specified.

M&L for hard core of gauge n.exc .63 mm deposited spead, levelled, watered well rammed toa uniform smooth surface n.exc 15 cm thick using broken stone or boulder complete all as specified and directed by the Engr-in-Charge.

M&L for PCC 100 mm thick 1:4:8 type D2 40mm stone aggt

M&L for Cement concrete 40 mm thick Type B1 1:2:4 20mm graded stone aggt in sub base of floor etc complete all as specifed.

M&L for Cement concrete 25mm thick Type B0 1:2:4 12.5mm graded stone aggt in flooring

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws and sealing corrugation joints with HDPE solvent as in roof complete all as specified and directed by the Engr-in-Charge.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws & sealing joints with HDPE solvent as in roof complete all as specified and directed.

M&L for excavation in trenches, n. Exc. 1.5m wide and n. Exc. 1.5m depth, for foundation, etc in soft loose soil and geeting out.

M&L for removing excaveted materials n.exc. 50m and depositing wherw directed at a level n. Exc.1.5m above the starting point out etc copmlete all as specified.

M&L for spreading and leveling in layers n. exc 25cm thick and well ramming including watering as requiered.

M&L for waling of RR uncoursed built in 1:6 CM, well bonded , bedded and solidly hearted etc complete all as specified.

M&L for cement concrete in steps and in coping etc.type C1 1:3:6 20mm graded stone aggt.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, path etc 75mm thick finishing surfaces even and smooth without using even and smooth without using extra cement including construction joints at every 3m interval and each corner and providing of mastic filling complete by the Engr-in-Charge.

M&L for Cement concrete 40 mm thick Type B1 1:2:4 20mm graded stone aggt in flooring and spike rollingto surface or making impression of expanded metal, whilist the concrete is green etc complete all as specifed.

M&L for 100mm size extruded brass type B-21 butt hinges with Aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed by the Engr-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil

M&L walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM (1: 6) including brought upto course at interval of every 60cm including laying PVC pipe in weep holes complete all as specified and as directed.

M/L for precast hollow block massonary of 1:3:6 type C1 using 20 mm graded stone aggregate exe 10 CM width and setting in CM morter 1:6

M&L for rendering 10mm thick in cement mortar 1:4 plastered surface finished rough to recive wall tiles etc complete all as specified and as directed.

M&L for 20 mm thick rendering in two layer (10+10) in cement mortar (1:4) with water proofing compound on brick work or concrete surfaces etc Note :- Water proofing measured sepeartily

M&L for non-skid ceramic coloured 7 to 8 mm thick area of each tiles exc. 0.18Sqm but not exc. 0.38Sqm in floor set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 20mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge

Materials and labour for glazed ceramic tiles coloured of size 300 x 200 mm x 7 mm thick fixed on vertical surfaces such as dado etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of screed bed 10mm thick in cement mortar 1:4 complete all as specified and directed by the Engr-in-Charge.

M&L for preparing surface newly plastered surface for three coat white washing on walls etc complete all as specfied.

Supply only integral water proofing compound complete all as specified and directed .

M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) completed.

All as per serial item No 28 here-in-before but using 5mm dia and over upto and including 8mm dia in stirrups, specer and binders complete all as specified and as directed.

All as per serial item No 29 here-in-before but us 5mm dia and over upto and including 10mm dia in stirrups, specer and binders

M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M & L for formwork to sides of concrete foundations,plinth beams for rough finished surface of concrete, complete all as specified and as directed

Material and labour for sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.

M&L for 75mm PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in sub base of floor

S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tub fixing in opening as per specification and drawing

S&F factory made solid panel PVC door shutter 30mm th (style) consisting of frame made out of MS tubes for top & bootom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rails on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the stiles & rails with suitable PVC sheet beading & joined together with solvent cement suppling & fixing in the frame at site as specification & drawing

S/F Steel ventilator with top hung shutter including hinges ,steel peg stay complete all as specified and directed.

S/F 3mm thick ,figured glass, pin head type and glazing with oil in square n.exc 0.50 sqm in each panel complete all as specified and directed

Supply & fix Mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete

M&L for 150 mm long aluminimum anodised barrel tower bolt

M&L for 125 mm long aluminimum handles cast type, anodised complete all as specified and directed by the Engr-in-Charge.

M&L for 15 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors

M&L for 20 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors complete all as specified and directed by the Engr-in-Charge.

S&F for 15 mm bore bib taps, standered of PTMT any colour high pressure screwed for iron pipe and fixed minimum weight 90 Grms complete all as specified and directed by the Engr-in-Charge.

Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimumweig ht 15mm-110gms) complete all as specified and directed by the Engr-in-Charge.

S&F vitreous china squatting pan "Orrisa patern" size 580 mm x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding ( Make :- Paryware/Hindware/Cera) complete all as specified and directed by the Engr-in-Charge.

S&F for PVC low level flushing cistern of 10 ltrs capacity action type white body with intel ball valve float handle bracket flush pipe etc complete and connecting to WC with PVC flushing pipe ( Make :- Paryware/Hindware/Cera) complete all as specified and directed by the Engr-in-Charge.

S&F of PVC 'P' or 'S' trap 110mm bore complete all as specified and directed by the Engr-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by the Engr-in-Charge.

S&F for 15 mm bore stop valve , standered of PTMT any colour high pressure screwed for iron pipe and fixed minimum weight 90 Grms complete all as specified and directed by the Engr-in-Charge.

S&F for 20 mm bore gun metal Gate valve , with oron wheel head, screwed both ends for iron pipoes and etc complete all as specified and directed

S/F Wash basins, Vitreous China (flat back or angle back type) of size 630x450mm inlcuding matching pedastal fixed with and including cp brackets with complete fitting complete all as specified and directed by the Engr-in-Charge.

S/ FSoap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and directed.

S/F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by the Engr-in-Charge.

S/F 1000 litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including float valve 20 mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new drain making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement mortar 1:2:4 types B-1 smooh finished and reforming benching are required.

M&L for PCC 1:2:4type B-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed by the Engr-in-Charge.

M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed by the Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and directed by the Engr-in-Charge.

S/F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by the Engr-in-Charge.

M/L Concrete bed to drain pipe of 110m m dia including packing under and haunching against the side or pipe after they are laid and tested in complete all as specified and directed by the Engr-in-Charge.

M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in wall ,retaining wall, etc complete all as specified and as directed.

M & L for formwork to fair finished surfaces of wall ,retaining wall, staircase railing etc complete all as specified and as directed

M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in slabs supported on wall beam, under-reamed piles and mass concrete complete all as specified and as directed

M & L for formwork to fair finished surfaces for edges of concrete flats, breaks in floor,in floors, side of RCC bands in walls and similar work not exc. 20cm wide etc all as specified.

Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 finished even and rough to receive tiles etc all as specifed and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 finished even and fair all as specifed and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site.

S&F Aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. (Make: Jindal or equivalent approved)

Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed by thr Engineer-in-charge. (Only weight of grill to be measured for payment).

S&F powder coated aluminium sliding window frames of size 65mm x 38mm x 1 mm thick or appropriate section and shutter of section 20mm x 40mm x 1 mm or appropriate equivalent section fixed with 5 mm thick tinted sheet glass with rubber gasket, handle, locking arrangement incl all necessary fittings complete all as specified & directed.

S&F in repairs 5.5 mm thick tinted Sheet glass , ordinary quality and glazing withoil putty in square in exc 0.5 sq.m in each pane completed.

M&L 2nd class hard wood in scantling fixed in clean sawn complete all as specified and as directed.

Material & labour for preparing old surfaces of wall and applying one coat of weather shield paint on wall, chajja, facia etc. surfaces complete all as specified and as directed by the Engr-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thic In CM 1:6 etc complete all as specified and as directed.

M&L for providing machine cut polished Kota stone slab 20-25mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed bed complte

M&L for kota stone slab 20-25mm thick in riser of steps ,skirting,dado and pillar laid over cement screed and jointed with ditto.

M&L for preparing old plastered surfaces of internal wall and applying one coat of OBD etc complete all as specified and as directed.

Material and labour for non skid Ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match complete all as specified and directed by the Engr-in-Charge.

Materials and labour for glazed ceramic tiles coloured of size 350x250 7mm/450x350x7 mm thick fixed on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by the Engr-in-Charge.

M/L Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screwsSeamless calcium silicate ceiling made out of 600 x 600 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed.

S&F 08-10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws to steel/wooden frame work complete all as specified and as directed.

Rough excavation in soft loose soilnot exc. 1.50M in depth and getting out complete all as specified

M & L for formwork to sides and soffits for rough finished of floors of roof beam, lintels cantilever shelves including supports of concrete, etccomplete all as specified and as directed

M&L for reinforced cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in intel over 1.5M span and plinth beam etc

M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of black japan paint over a coat of red oxide

M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer .

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.

S&F MS but hinges 100mm long, medium weight cold rooled complete all as specified.

S&F PVC (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement etc. Completed.

M&L for form work for rough fininshed flat surface to edges of concrete flats exc 5cm but n exc. 10cm etc complete all as specified and as directed.

M&L for one coat bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 kg per sqm per coat.

M & L for point wiring with 1.50 Sqmm (nominal cross sectional area) PVC isulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn through and including non metalic rigid PVC medium grade conduit and conduit accessories (ISI) Marked concealed in wall/fixed to roof, ceiling etc. including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, fabricated sunken terminal box made out of 1.60mm thick sheet steel painted, concealed in walls with 3mm thick bakelite/PVC sheet ISI marked top cover with brass chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc. connected to main switch/DBs or common earth dolly for light point/exhaust fan point/ controlled by one switch 5/6 Amp one way complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No 99 here-in-before but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS PVC insulated unsheathed multistranded copper conductor cable with 2.5 Sqmm FRLS PVC insulated unsheathed solid copper conductor as earth wire complete all as specified and directed.

All as per item No 99 here-in-before but for one socket outlet/metal clad sockt of 15 amps fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulate and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed.

S&F switch socket combination, 2 in 1 6 pin, 5/6 Amps and 15/16 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed. Make : Anchor Cat No 38808/50665 or equivalent of approved make.

S &F switch piano flush button, single pole, one way, 6 amps 230 volts (ISI marked) complete all as specified and directed. Make : Anchor Cat No 50053 or equivalent of approved make.

Supply & fixing lamp holder angular/straight insulated body, with back plate suitable for battern futtings, white/ivory finish complete all as directed.

Supply and fixing LED light fitting 1x9W/ 1x10W bulk head luminaries including LED light driver holder connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, copper winding of sweep 250mm

Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 Ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & sock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and as directed. Make : - Havells Cat No - Monza DX : GHWBMGSWH0550 or equivalent approved.

Supply and fix sheet metal enclosure for 4 way distribution boards (DB's) single pole and neutral, double door suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed.

Supply and fix MCB, SPN 32 amps, 240 volts, 'C', 10KA complete all as specified and as directed.

S&F MCB single pole 6 to 32 Amps 240 volts, 10KA rapturing capacity, C curve complete all as directed by Engineer-in-Charge

Supply, laying, jointing and testing in trenches or passing through pipe, 1100 volts grade XLPE insulated, screened, PVC bedded galvanized steel or wire armoured LT electric power under ground cable conforming to IS-7098 (Pt-I)-1988 heavy duty with aluminium conductor of cross sectional area 10 to 16 Sqmm 2 core with necessary fixing arrangements such as lungs, glands and terminal etc complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron or steel earth lead wire 4mm dia size by means of nut/bolt and washer of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I 2009 incl necessary excavation and earth work, GI pipe 20mm dia medium grade ISI marked for watering and GI pipe 15 mm dia medioum grade ISI marked pipe for protection of GI earth wire etc, PCC chamber with PCC (1:3:6) type c-2 precast RCC cover with reinforced cement concrete (1:2:4) type B1 (20 mm graded stone aggregate) reinforced with 8mm dia TMT bar @ 150mm c/c both way with provision of 10mm dia MS bar handle funnel, wire mesh, charcoal dust, salt etc connected to DB as indicated including testing complete

Supply and fixing installing and testing of PRI ceiling movement detectorsensor IP 20 IP-55 with 180-360 degree detection angle for automatic control of lights (movement base) with complete wiring all as specified and as directed by Engr-in-charge. Make: Legrand, Cat No 048899 or equivalent make as per CA

S&F switch socket combination, 2 and 3 pin, 5/6 Amps multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed.

Supply and fix ceiling rose, three terminals 230 volt (ISI marked) surface bakelite suitable for batten fitting complete all as specified and as directed. (Make : Havells Cat No AHLHXCW000 or equivalent in list of make)

S&F sheet metal enclosure DB's 240 volts IP-43 suitable for mounting MCB's SPN, 8 way with 200 Amps rated copper bus bar double door type complete all as specified and as directed.

S&F MCB single pole & neutral 40 to 63 Amps 240 volts, 10KA rapturing capacity, C curve complete all as directed by Engineer-in-Charge

S&F LED light fittings 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall/ surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficeiency electronic driver & surge suppressor of 2 KV or more, luminaire efficancy >95 lumens/watt, power factor >/0.90 operating range - 140 to 270 V 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitables size all as specified and as directed.

S&F LED buld head fittings of 10 Watts presure die cast housing acrylic diffuser and frame with IP 66 protection complete all as specified and as directed.

Supply and laying DWC pipe SN-4 with coupler 50mm OD, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS-14930, Part-II complete with fittings and cuttings, jointings etc laid in trenches/fixed to pole/laying under road crossing/fixed in pavement walls with clamps complete all as specified and as directed.

Supply cable trolly box including necessary fittings and fixture as specified and as directed by Engr-in-charge.

Supply and fixing in repair control panel including necessary fittings and fixture as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs to EOT by removing unserviceable coupling and replacing new coupling including necessary fittings and fixture as specified and as directed by Engr-in-charge.

Supply and fixing in repairs Gear Box including necessary fittings and fixture and oiling/greasing as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs Rail clamp including necessary fittings and fixture as specified and as directed by Engr-in-charge.

Supply and fixing in repairs rope drum including necessary fittings and fixture as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs thrusters including necessary fittings and fixture as specified and as directed by Engr-in-charge.

Supply and fixing in repairs winch including necessary fittings and fixture as specified and as directed by Engr-in-charge.

Supply and fixing in repairs joint cover including necessary fitting and fixture as specified and as directed by Engr-in-charge.

Supply and fixing in repairs wire rope embedded pendant cable including necessary fittings and fixture as specified and as directed by Engr-in-Charge.

Overhauling and servicing charge for EOT crane repair including oiling and greasing and providing required fluid and accessories for EOT crane. It includes all labour charges and over. Note for Item No 121.00 to 131.00 :- Quoted rate under Sl BOQ item No 131 shall be deemed to include the repair/overhauling and servicing of EOT (Electric overhead travel) crane capacity 2.0 Tonne, single guide type, floor operated, perdent push button type control, medium duty class-II for indoor operation (20 metre span) including grease, tape minor servicing material etc. Major Spares required to be replaced shall be paid under BOQ item No 121.00 to 130.00 at Supply only rates.

KAMLESH ENTERPRISE

DHARMINDER SINGH

M/S ANIL KUMAR THAKUR

NISHA CONSTRUCTIONS

KARMA TSETEN BHUTIA

BIJAY MITTAL