Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC PLOT NO 15 JAYASURIYA STREET GANGAI NAGAR KALLIKUPPAM AMBATTUR CHENNAI 600053 | CHENNAI | CHENNAI | TAMIL NADU | 600053 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹8.5 L+₹65,898 (8.43%)Rejected-AOC NO 22 KUNNIJI NAGAR 1ST STREET EAST TAMBARAM CHENNAI 600 059 TAMIL NADU | CHENNAI | CHENNAI | TAMIL NADU | 600059 | L2 | Rejected-AOC Lowest bidder |
Tender Value
₹7.3 L
EMD Value
₹14,600
Closing Date
23 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Nav Chennai
AGE(I) Navy Chennai Military Engineer Services Fort St George Rajaji Salai Chennai 600 009
DAY TO DAY MAINTENANCE IN OTM MD ACCN IN ZONE B AREA UNDER AGE(I) NAVY CHENNAI
2023_MES_604208_2
AGE(I)/NAVY/CHN/8401 of 2023 - 24
Open Tender
Civil Works
Item Rate
180 days
Chennai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE(I) Navy Chennai
₹14,600
Yes
14 Sept 2023
3 Aug 2023
24 Aug 2023
3 Aug 2023
23 Aug 2023
4 Aug 2023
Amount
Attending minor complaints of plumbing and sanitary fittings including water leakage from taps, WC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bolttle traps etc to make it functional and stop leaking of any type of plumbing and sanitry items as in day to day maintainence work complete all as directed. Note:- (i) Supply only items will be measured under sl item No. 2 to 21 as below and paid separately and fixing rate, screws, nails, plugs and greases are included in the quoted rate. (ii) In case Daily manpower is not arranged as per direction of Engr-in-charge, recovery at double the market rate or double the CA rate whichever is higher will be made
Supply only 20mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)
Supply only 25mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)
Supply only 600mm long PVC connections 15 mm size with PTMT nuts
Supply only Fancy type CP stop/angular cock 15mm dia
Supply only Fancy type bib cock 15mm dia CP
Supply only Fancy type pillar cock 15mm dia CP
Supply only Fancy type shower 15mm dia CP
Supply only Swan neck Sink fancy type tap 15mm dia CP
Supply only PTMT stop/angular cock 15mm dia
Supply only PTMT bib cock 15mm dia
Supply only PTMT pillar cock 15mm dia
Supply only PTMT shower 15mm dia
Supply only PTMT Swan neck Sink tap 15mm dia
Supply only Fancy type 600 mm long towel rail
Supply only Fancy type towel ring CP
Supply only Fancy type SS Soap dish
Supply only 600mm long x 180mm wide Glass shelf
Supply only 300mm corner glass shelf
Supply only 15mm dia of CP health faucet and 1mtr long flexible pipe
Supply only 15mm dia of PTMT health faucet and 1mtr long flexible pipe
Attending minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard, drawers and the like door springs, etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functning to seating over with Each other with tightening of screws/nails, door springs etc, including petty repairs material like screws/nails, plug, grease etc to make it functional as in day to day maintenance work complete all as specified and directed. Note:- (i) Supply only items will be measured under Sl item No. 23 to 36 below and paid separately and fixing rate, screws, nails, plugs and greases are included in the quoted rate. (ii) In case Daily manpower is not arranged as per direction of Engr-in-charge, recovery at double the market rate or double the CA rate whichever is higher will be made
Supply only 75mm size, Butt hinges, heavy weight, SS,
Supply only 100 mm size, Butt hinges, heavy weight, SS,
Supply only 125 mm size, Butt hinges, anodised aluminium of type B-21
Supply only aluminium handles cast type anodised for 100 mm
Supply only aluminium handles cast type anodised for 150 mm
Supply only Stainless steel handles of 450 mm for glass doors
Supply only 150mm long aluminium, anodised barrel tower bolts
Supply only 200mm long aluminium, anodised barrel tower bolts
Supply only 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) complete all as specified and directed
Supply only 150 mm size Hasp and staple, safety type, aluminium anodised
Supply only 75mm long Brass handles, cast type, polished bright handles
Supply only 150mm long floor door stopper of Brass
Supply only 150mm long floor door stopper of Aluminum
Supply only 150mm long mortise lock brass type of 4 levers
S&F in repair for aluminium powder coated tubular fancy type curtain rail/ drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed. Make:- Allishan-Ivory pearl interior series or equivalent as specfied in PS
Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm Each and including easing and adjusting before fixing of door shutter complete all as specified and directed.
All as per Sl item No. 38 above but with out taking down
Taking down and refixing the same opening of door Shutters of any description n exc 1 sqm but Each and including easing and adjusting before fixing of door shutter complete all as specified and directed.
All as per Sl item No. 40 above but with out taking down
S&F for Aluminum powder coated frame with doors shutters, with one or more rebates, Aluminum Partitions sides and middle sections , Aluminum powder coated sliding three track windows of frame with shutters and Fixed types Aluminum ventilators with louvers including fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.complete all as specified and directed.
S&F for aluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.
All as per Sl item No. 43 above but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including teak wood beading for wooden doors etc etc complete all as specified and directed.
S&F for 3 mm thick sheet glass figured glass, pin head ,obscured or frosted, including teak wood beading for wooden glazing windows in square not exc 0.50 Sqm in Each pane including hacking out old broken glass complete all as specified and directed.
S&F for plain sheet glass,3 mm thick, ordinary quality and glazing and fixed including teak wood beading for wooden glazing windows in square not exceeding 0.5sqm in Each etc including hacking out old broken glass all as specified and directed.
S&F for plain sheet glass,4 mm thick, ordinary quality and glazing alu windows and fixed with aluminium glazing clips exceeding 0.5sqm in Each complete all as specified and as directed
S&F for plain sheet glass,4 mm thick, ordinary quality and glazing aluminum fixed /sliding windows and fixed with aluminium glazing clips exceeding 0.5sqm in Each including hacking out old broken glass all as specified and directed.
S&F for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in Each complete all as specified and as directed
S&F for plain sheet glass, ,5.5mm thick, ordinary quality and glazing doors and fixed with aluminium glazing clips in square exceeding 0.5sqm in Each including hacking out old broken glass all as specified and directed.
M&L for 6mm thick bakilight hard sheet decorative grade 1 (with BWR resin) with decorative face veneers on one side and other side white; and fixed to doors and Partitions etc and fixed with aluminium glazing clips etc complete all as specified and as directed
All as per Sl item No. 51 above but fixed in repair to aluminium Partitions and Aluminium doors etc complete all as specified and directed.
S&F in repair for 75mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed
S&F in repair for 125 mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed
S&F in repair for 125 mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed
S&F in repair aluminium handles cast type anodised for 100 mm complete all as specified and directed
S&F in repair aluminium handles cast type anodised for 150 mm complete all as specified and directed
S&F in repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed
S&F in repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed
S&F in repair for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed
S&F in repair for 30 mm Width of flaps (when open) Continuous (piano) hinges, brass, bright finish or electrogalvanised
S&F in repair for Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed.
S&F in repair for Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed
S&F in repair for 150mm Rim latch for glass door with two levers, ofbrass body, polished bright. with brass knob or lever handle and fixed complete all as specified and directed
S&F in repairs for 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Planstic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified.
All as per Sl item No. 65 above but for 25 mm dia complete all as specified and directed.
All as per Sl item No. 65 above but for 32 mm dia complete all as specified and directed.
S&F in repairs PPR gate valves (brass insert) outer dia of pipe 20 mm complete all as specified.
All as per Sl item No. 68 above but for 25 mm dia complete all as specified and directed.
All as per Sl item No. 68 above but for 32 mm dia complete all as specified and directed.
S&F in repair for 20mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)
All as per Sl item No. 38 above but 25mm dia.complete all as specified and directed.
S&F in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified.
S&F in repair for low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection all as directed.
S&F in repair for Wash basins counter type, vitreous china of 550x400mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of 32mm waste coupling and 1mtr waste pipe all as specified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed.
S&F in repair for Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed .
S&F in repair for Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, long/ short bodys screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed
S&F for in repair pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe fixed all as specified and as directed.
S&F in repair for 125 mm dia Fancy type brass CP shawer rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed .
S&F in repair for tubular towel rail, brass CP 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed.
S&F in repair for PVC health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.
S&F in repair for stainless steel sink 1mm thick made of stainless steel for kitchen or laboratory with plugs, washers and wastes; including 40mm waste coupling , bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600mm x 450mm bowl size 510mm x 330mm x 230mm
S&F for 32 mm PVC waste hose Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. Cm for WHB / SS Sinks with coupling of length 0.90 mtr etc complete all as specified.
S&F plastic water closet seat cover, black,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed
S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
S&F in repairs Door closer hydraulically of (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
S&F in repairs for 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed Make Jaquar or equivalent as specified in PS
S&F in repairs for 32/40 mm dia chromimun plated waste coupling fixed in WHB/Sink complete all as specified and directed
S&F in repairs for parts of double action siphon for Vitreous flushing cistern and cleaning of cistern etc complete all as specified and directed
S&F in repairs for parts of Single action siphon for PVC flushing cistern and cleaning of cistern etc complete all as specified and directed
S&F in repairs for parts of PVC 15mm float valve with ball for PVC flushing cistern and cleaning of cistern etc complete all as specified and directed
S&F in repairs for parts of Spindel for Bib tap/ stop cock of half turn type and cleaning etc complete all as specified and directed
S&F in repairs for parts of long body Spindel for Concealed stop cock of half turn type and cleaning etc complete all as specified and directed
S&F in repair for PVC OHT Cover with frame thread type with suitable locking arrangement upto 1000 litres capacity complete all as specified and directed.
S&F stainless steel plate rack kitchen 1 mm thick of size 75 cm x 95 cm with racks and shelfs including complete fixing arrangements as per manufacturers instructions and taking down the old stainless steel plate rack and taken as credit complete all as specified and as directed.
S&F cabinet mirror of size 335x140x430mm with approved colour complete including necessary fixing arrangements and taking down the old mirror and taken as credit complete all as specified and as directed. Make -Water Tech or equivalent as specified in PS
Sri Sankar Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .