Loading…
Loading…
Tender Value
₹15.2 L
EMD Value
₹38,105
Closing Date
8 Jun 2026, 10:00 pm3d left
Directorate of Municipal Administration
Construction of Indira Canteen at Nippani Bus Stand,CMC Nipani
302358
DMA/2026-27/BD/WORK_INDENT59006
Open
Buildings
DMA City Municipal Council Nippani
4 documents required · 4 mandatory
List of existing commitments and ongoing work
Contractor Registration Details
Work done Certificate
Last Five Years Annual Turnover Certificate with UDIN No
As Per Tender Document LOC Unconditional
₹500
₹38,105
30 May 2026
30 May 2026
9 Jun 2026
8 Jun 2026
Construction of Indira Canteen at Nippani Bus Stand,CMC Nipani
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to th...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work PWD SR Vol 3 P No 17 I NO.3.1
Providing and laying in position plain cement concrete Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt cru...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8% PWD SR Vol 1 P No 111 I No 1
Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% PWD SR Vol 1 P No 111 I No 9
Addendum I-Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50%PWD SR Vol 1 P No 111 I No 2
Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% PWD SR Vol 1 P No 112 I No 15
As per recommendations of Technical working group,Rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below For Drain form works Consider 35% PWD SR V...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) wit...
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust,...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residenti...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
59006 Estimate.pdf
Others - Estimate • 2.56 MB
59006 Indira Canteen KW-1 Others.pdf
Tender Document • 0.84 MB
Download all tender documents and submit your bid