SPECIAL REPAIRS AND REPLACEMENT OF EXTERNAL WATER SUPPLY PIPE LINES FROM PARADE GROUND PUMP HOUSE TOWARDS HARDING LINE AND CERTIN MINOR WORKS UNDER GE BELGAUM

Amount

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in soft/ loose soil for laying pipes, etc. all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in hard/ dense soil for laying pipes, etc. all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in soft disintegrated rock for laying pipes, etc. all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25cm thick all as specified and directed.

Removing excavated soil to a distance n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M&L for plain Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate for foundation of poles complete all as specified and directed

M&L for 150mm bore ductile iron pressure pipes with spigot and socket ends, centrifugally cast (spun), ISI marked, Class K7, in any length, laid in trenches/ on ground/ on supports with and including push-on joints conforming to IS 5382 including dismantling and taking down existing unserviceable CI/ DI pipes of any description and type and making good disturbed surfaces all as specified and directed. Note: Ductile iron pipe fittings wherever required shall be measured and paid separately under relevant items of this Schedule.

M&L for ductile iron fittings such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps, plugs, etc. class K-12, including provision of rubber gaskets used with push-on joints conforming to IS 5382 all as specified and as directed

Supplying and fixing of 150mm bore sluice valve, cast iron body with stainless steel spindle and iron wheel head, flanged type, ISI marked, conforming to IS-14846 Class PN 1.0, with rubber gaskets, MS nuts, bolts, washers, packing materials, etc., as required and testing complete including taking down the existing unserviceable sluice valve of any description all as specified and as directed. Make : KIRLOSKAR

M&L for double wall corrugated HDPE pipes, conforming to IS 14930-2001, ISI marked, 63mm outer dia, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches/ under roads/ crossing etc. all as specified and as directed.

M&L for 80mm bore GI water tubing, medium grade with and including provision of all fittings, laid in trenches alongwith its connections including taking down existing unserviceable GI pipes of any description and type and making good disturbed surfaces all as specified and as directed.

M&L for 50mm bore GI water tubing, medium grade with and including provision of all fittings, laid in trenches alongwith its connections including taking down existing unserviceable GI pipes of any description and type and making good disturbed surfaces all as specified and as directed.

M&L for 40mm bore GI water tubing, medium grade with and including provision of all fittings, laid in trenches alongwith its connections including taking down existing unserviceable GI pipes of any description and type and making good disturbed surfaces all as specified and as directed.

M&L for 25mm bore GI water tubing, medium grade with and including provision of all fittings, fixed complete to walls and ceilings or laid in floors/ trenches including alongwith its connections all as specified and as directed.

M&L for 15 mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls, ceilings with PVC batten holders, all as specified and as directed.

M&L for 20 mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls, ceilings with PVC batten holders, all as specified and as directed.

M&L for 25 mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls, ceilings with PVC batten holders, all as specified and as directed.

S&F 40mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed all as specified and as directed

S&F 25mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed all as specified and as directed

S&F in repairs 25mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.

S&F 15 mm bore Bib tap, long body, brass chromium plated, fancy type with wall flange, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

S&F 15 mm bore stop valve, brass chromium plated, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, 600mm long all as specified and directed.

S&F in repairs Sheet metal enclosure type Single pole and neutral for MCB DBs are fitted with Bus Bars, Neutral Links, Blanking plates 4 way with double door type including 2nd class hard wood board with sunmica all as specified and as directed.

S&F in repairs Sheet metal enclosure type Single pole and neutral for MCB DBs are fitted with Bus Bars, Neutral Links, Blanking plates 12 way with double door type and including 2nd class hard wood board with sunmica all as specified and as directed.

S&F in repairs Sheet metal enclosure type Vertical Triple pole and neutral for MCB DBs are fitted with Bus Bars, Neutral Links, Blanking plates 12 way with double door type and including 2nd class hard wood board with sunmica all as specified and as directed.

S&F MCCB TP 125 Amps, 25KA, 415 Volts, AC supply, fixed thermal magnetic settings, all as specified and as directed.

S&F MCB DP 63A 'C' series 10KA 50Hz 240 Volts AC supply all as specified and as directed.

S&F MCB SP 6-32A 'C' series 10KA 50Hz 240 Volts AC supply all as specified and as directed.

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 50 Sqmm x 3.5 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up, testing and commissioning complete all as specified and as directed. Note: Excavation, earth work, DW pipe/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

M&L for flexible PVC insulated and sheathed copper conductor cable of size 3 core x 2.5 sqmm including connecting up and testing complete, all as specified and directed.

M&L for flexible PVC insulated and sheathed copper conductor cable of size 2 core x 2.5 sqmm and 1 core x 1.5 Sqmm including connecting up and testing complete, all as specified and directed.

S&F in repairs Single pole and neutral enclosure, powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V, including provision of one single pole MCB 15 Amps 'C' curve type all as specified and as directed.

M&L for concealed Point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including ISI marked PVC conduits of suitable size and all necessary conduit fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. including provision of 1.6mm thick MS pressed steel terminal box flush mounted into wall with 3mm thick plastic laminated sheet cover for mounting switches/ sockets etc. for one light point controlled by one switch 1 way including taking down existing unserviceable point wiring of any description and making good disturbed surfaces complete all as specified and directed.

All as described in item above but for one 5 amps socket outlet on independent board

All as described in item above but for one 5 amps socket outlet on same board with other switches

All as described in item No.above but wiring with 2.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable and with one run of single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable of size 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, ncluding taking down existing unserviceable point wiring of any description and making good disturbed surfaces complete for one 15 Amps power socket point on independent board all as specified and directed.

M&L for Point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including ISI marked PVC casing capping of suitable size and all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including 2nd class HW board fixed on wall with sunmica top for mounting switches/ sockets etc. for one light point controlled by one switch 1 way complete all as specified and directed. all as specified and directed.

M&L for sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 6 sqmm drawn through and 1100 volt grade including PVC casing and capping of suitable size with all necessary fittings and provision of one run of 6 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly, including taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces complete all as specified and directed. Note: Two runs of 6 sqmm cable, one run of 6 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length.

S&F in repairs modular switch, 1 module, 1 way, 6 Amps, 230 volts, AC, flush type all as specified and directed.

S&F in repairs modular switch, 1 module, 1 way, 16 Amps 230 volts, AC, flush type all as specified and directed.

S&F in repairs modular socket outlet, 2 module, 6 Amps 2 cum 3 pin multipurpose all as specified and directed.

S&F in repairs modular socket outlet, 2 module, 2 pin 6A/ 3 pin 16 Amps, multipurpose all as specified and directed.

S&F in repairs ceiling rose 3 terminal suitable for 230 volts AC supply all as specified and directed.

S&F in repairs surface mounting LED light fitting, 20W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, 20W LED strip, integrated driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block and provision of 2 Nos. of PVC square blocks all as specified and directed. Make: HAVELLS LUMILINE PLUS or equivalent in CG/ Philips/ Wipro

M&L for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI strip of size 32x6mm or 25 x 4mm thick by means of GI nuts, bolts and washers and 50 mm dia GI pipe light grade for protection of earth lead and connected to control board or as directed by Engineer-in-Charge 20mm dia GI pipe medium grade for watering arrangement and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

S&F storage type water heater (Geyser), vertical type, 25 litres capacity, 2000 Watts, 5 Star rating including drilling holes into wall, provision of 4 Nos of suitable size anchor bolts, nuts and washers, connecting up electrical & water supply lines, testing complete all as specified and as directed. Make: MONZA EC model of HAVELLS or equivalent model in RACOLD/ BAJAJ

S&F in repairs exhaust fan, 300mm sweep, 230/240 Volts, 900 RPM, heavy duty, single phase, metallic body with louvres and fixing arrangements with fixing bolts and provision of 3 core flexible copper conductor cable of size 1.5sqmm size from ceiling rose to connector of exhaust fan and testing including making circular hole of suitable in brick masonry wall and making good disturbed surfaces to match with existing surfaces all as specified as directed. Make: Havells Venti Air DX model or equivalent model in Almonard/ Crompton Greaves

M&L for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tank, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position complete including taking down the existing unserviceable PVC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully all as specified and directed.all as specified and directed.

M&L for construction of valve chamber of size 1200 x 1200 x 1100 mm (Internal dimensions) with 100mm thick PCC 1:4:8 type D2 using 40mm graded aggregate for foundation, 200mm thick precast PCC 1:3:6, type C0 solid block walls built in CM 1:6, 75mm average thick x 200mm width coping in PCC 1:2:4 type B1 using 20mm graded stone aggregate, 15mm thick rendering in CM 1:4 to internal walls, floors and upto150mm depth below GL to external walls, including provision of 2mm thick MS sheet cover fixed to MS angle iron frame made out of 40 x 40 x 4 mm thick angle iron with necessary MS flat iron stiffeners of size 40mm x 4mm including two coats of synthetic enamel painting over one coat of red oxide primer to all steel surfaces and provision of locking arrangements including necessary excavation and earth work in any type of soil including demolition of existing valve chamber all as specified and directed.

M/s.GOODWILL ELECTRICALS

M/s. VIJAY ELECTRICALS