Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC KUTUMB 143 40 VINAYAK NAGAR INDALPUR ROAD NAINI PRAYAGRAJ 211008 | PRAYAGRAJ | UTTAR PRADESH | 211008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹26.0 L+₹2.0 L (8.29%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹26.8 L+₹2.7 L (11.4%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹26.9 L+₹2.9 L (12.2%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹27.3 L+₹3.3 L (13.7%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L5 | Rejected-Finance Being L5 |
Tender Value
₹38.8 L
EMD Value
₹77,500
Closing Date
14 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
Spl repair to certain (1 to 8) Qtrs at Saraswati Vihar, Old Cantt Prayagraj.
2023_MES_623203_1
8671/E8
Open Tender
Civil Works
Item Rate
180 days
Prayagraj
As Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Prayagraj
₹77,500
Yes
4 Apr 2024
14 Oct 2023
16 Nov 2023
14 Oct 2023
14 Nov 2023
31 Oct 2023
Amount
Demolition of brick work built in cement or cement lime mortar including all quoins arches dressed stone work etc and excluding ashlar facing dressed stone work etc. complete all as specified and directed.
M&L for brick work with old size sub class 'B' brick, straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified and directed.
….Ditto…. All as per item No. 02 above but EXCEPT BRICK
Dismantling brick tiles any size laid bedded and pointed in any mortar complete all as specified and directed.
Demolition of mud on roofs, any thickness and in any position and leaping over roof terrace, removing the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.
M&L for PCC 1:2:4 type B0 (using 12.5 mm grd stone agg) as in roof padding, finishing the surface fair & even complete all as specified and directed.
M&L for screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with water proofing compound (WPC to be measured and paid separately) as per manufacturer’s instructions, finished even & fair complete all as specified and directed
M&L Cleaning the sunken floor surfaces, roof slab including taking down existing roof treatment of any type from roof slabs and cleaning of surfaces, by wire brushes, brooming, removing dust, including dismantling of floor, lime terracing as required and applying following:- (a) Bitumen primer confirming to IS-3384-1965 @ 0.50 kg per sq.m. (b) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS – 702-1998 for water proofing membrane. (c) Applying of APP water proofing membrane weight not less than 3 kg / sq.m over entire area with overlaps and sealed all as specified and directed. (d) Again applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg / sq.m over water proofing membrane. (e) Dusting dry sand @ 0.75 kg per sq.m over water proofing membrane.
M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed
Demolition of PCC of any description and in any position not specifically provided for complete all as specified and directed
M&L for Cement concrete (1:5:10), type E2 (using 40mm graded stone aggregate) as in filling in sunken part of slab complete all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (600X600 square) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed
M&L for Coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 mm to 8 mm thick (square/rectangular)area of each tile exceeding 0.06 Sqm but not exceeding 0.11sqm, joint free in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed
M&L for Baroda green Marble flooring work 18 to 20 mm thick laid over and including 20mm screed bedding in cement mortar (1:4) (table rubbed and polished) incl steps, stairs, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture mixed with pigment to match complete all as specified and directed
M&L for Baroda green marble slab 18- 20mm thick (in full length one piece) in riser of steps, stairs, skirting, dado and pillar laid over and incl 10mm thick plaster in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified and directed
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed
M&L for 1st quality non skid coloured ceramic Havey duty Parking (ENDURA type) tiles, area of each tile n exc 0.11 Sqm, 10 mm thick, set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:4:8 type-D-2 (using 40mm graded stone aggregate) as in sub base for floors/ pavings etc complete all as specified and directed
M&L for Chequered cement concrete tiles 300mm x 300mm x 25mm thick coloured with table rubbed rubber moulded set, jointed and pointed in neat cement slurry over and incl15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 mixed with water proofing compound (liquid) as per manufacturer instructions, finished surface even and fair complete all as specified and directed.
Supply only Liquid water proofing compound of approved make complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface, finished even and fair on internal surfaces of wall complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling complete all as specified and directed
M&L for preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment preparation of old plastered surface and applying two coat of cement base paint on walls over a coat of primer including complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 1 mm thick wall care putty complete all as specified and directed.
M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning for refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.
S&F 110mm PVC (SWR) bends with access door complete all as specified and directed.
S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.
S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F Stack clamps made out of 50mm x 5mm flat iron including bolts & nuts suitable for 100mm bore pipe complete all as specified and directed.
…..ditto…. all as per item No. 49 above but for 75mm bore pipe.
M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, selves, lintels etc. and cutting chases for concealed for water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth. Complete all as specified & as directed
Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.
S&F GI tubing 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and directed.
M&L for refixing old steel tubing 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note : GI tubing obtained from item No. 52 above shall be used.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed.
S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed
M&L for refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note : GI tubing obtained from item No. 55 above shall be used.
S&F in repair 15 mm dia bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.
S&F in repair 15 mm dia angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.
S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valueless symphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair Sinks kitchen or laboratory with drainage board made of stainless steel sheet, 1.0mm thick, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm (excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size) complete all as specified and directed
Supply only pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed.
S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S&F in repair 500 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repair 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F in repair 15 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 with fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.
S&F in repair SS soap dish as per sample kept in AGE's office or as approved by Engineer-in-charge complete all as specified and directed
Taking down chowkhat or frame with shutter (without taking off shutter from the frame), area not exc 1.5 Sqm each complete all as specified and directed.
Taking down shutters only of any description not exc 1 sqm each including removing from site to store or otherwise complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame), area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II complete all as specified and directed. .
S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.
S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.
M&L for preparation of new steel primed surface and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bed block and filling in door frames and the likes complete all as specified and directed.
S&F 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b), supplied and fitted to chowkats complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 150mm stainless steel handles fabricated type complete all as specified and directed.
S&F 200mm stainless steel handles barrel tower bolts of fabricated type and fixed complete all as specified and directed. .
S&F 250mm stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified and directed.
S&F 100 mm long stainless steel hinges, complete all as specified and directed
M&L for MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for Anodised aluminium frame for doors, windows, ventilators powder coated (Thickness or powder coating not less than 50 micron ) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L for Anodised aluminium window and ventilator shutters, powder coated (Thickness or powder coating not less than 50 micron ) side hung type without sash bars using aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1 no.), tower bolt 100mm long (1 no) complete all as specified and directed.
M&L for 4.8 mm thick plain sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.
M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 140mm Floor door stopper of stainless steel body and tongue, with hard drawn steel spring complete all as specified and directed.
S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A complete all as specified and directed.
M&L for Cutting holes into or through brick walls built in cement mortar superficial area n exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.
S&F in repair 25 mm dia stainless steel curtain rod of 304 grade incl one pair of SS Bracket and stainless steel end cover for each rod cut to size and fixed in position complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails or any other means complete all as specified and directed
S&F 18 to 19 mm thick Block board, grade-2 quality, interior grade, commercial types in cup board shutter/ shelves and fixed with screw and teak wood beading all around / exposed surfaces complete all as specified and directed.
S&F 150 mm aluminium anodised hasp and staple complete all as specified and directed.
S&F75 mm dia oval shape aluminium handle fancy type brass polished bright finish complete all as specified and directed
S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud as per approved sample complete all as specified and directed.
S&F 25mm thick coloured prelaminated PVC ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed
S&F continuous (piano) hinges, mild steel bright finish of width 30 mm complete all as specified and directed.
Demolition of cement concrete reinforced as in chajja, manhole cover and similar suspended work complete all as specified and directed.
M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole covers etc complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Taking down carefully aluminium/copper point wiring (light fan socket or power) complete and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside serviceable items for reuse with in the same bldg and removing U/S items from site complete all as specified and directed.
Taking down main switches, distribution boards and cut outs of any capacity along with the existing boards and removing the same from site and keeping in safe custody for reuse or issue on credit to contractor and making good disturbed surface or portion of walls, complete all as specified & directed.
Taking down carefully sub main wiring of any numbers of wire on wooden batten or surface conduit or concealed conduits / casing caping any type complete all as specified & directed.
M&L for point wiring in concealed PVC conduit complete including necessary chases cutting with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) multi stranded copper conductor single core and including non metallic concealed PVC conduit not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 1.6 mm thick of reqd size (factory made) with top cover 3 mm thick of plastic laminated sheets of required colour painting terminal boxes inside and outside with two coats of block bituminous paint over a coat of red oxide primer complete with all accessories and including PVC insulated and unsheathed cable 1.5 sqmm (nominal area) stranded copper conductor single core of green col our as earth wire to common earth and connected to earth dolly drawn in same concealed conduit incl making good disturbed surfaces and finished to match with existing surface complete all as specified for the following:
All as per Item No. 117 but for One light/fan/exhaust fan point controlled by one switch
All as per Item No. 117 but for One 5 amp socket outlet point on an independent board with 2.5 Sqmm cable(wire)
All as per Item No. 117 but for One 5 amp socket outlet point on same board with 2.5 Sqmm cable(wire)
All as per Item No. 117 but for One bell buzzer point controlled by bell push single pole one way
All as per Item No. 117 but for One light point controlled by 2 two way switch
All as per Item No. 117 but for One 15 Amp socket outlet on Independent board but with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) multi stranded copper conductor single core including PVC insulated 2.5 sq mm stranded copper conductor green colour as earth wire
S&F switch piano, single pole one way 5 Amps 240 Volt complete all as specified and directed.
S&F switch piano, single pole two way 5 Amps 240 Volt complete all as specified and directed.
S&F socket outlet, 5/6 amps 5 pin flush type , 230 volts complete all as specified and directed.
S&F switch piano flush button single pole one way 15/16 amps 240 volt complete all as specified and directed.
S&F socket outlet, 2in1 , 15/16 amps 6 pin flush type , 230 volts complete all as specified and directed.
S&F lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent holder fittings complete all as specified and directed
S&F ceiling rose three terminals/PVC/polycarbonate, isolated body on PVC board complete all as specified and directed.
S&F Switch, bell push piano, flush type, 5/6 amp, single pole one way, 230 volt complete all as specified and directed.
S&F electric Bell dingdong type, AC 230 volts, 50 Hz, single pole complete all as specified and directed.
S&F ceiling fan regulator, electronic, rotary step type suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.
S&F sheet metal enclosure (MCB distribution board), 8 way single pole & neutral, 240 volts with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. (Note-MCBs will be measured separately.)
S&F MCB SPN 240 volt any rating from 6 to 32 amps , with rupturing capacity 10 KA ,including providing thimble for out going cable complete all as specified and directed.
S&F MCB single pole 240 volt any rating from 6 to 32 amps , with rupturing capacity 10 KA , including providing thimble for out going cable complete all as specified and directed.
S&F 1 x 9/10 W LED Mirror light fitting, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.
S&F 1 x 10W LED Bulk head light fitting, LED 6000 lumen, enclosed in polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.
S&F 1 x 18W LED wall mounted tube light fitting, LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.
S&F decorative wall light fixture made up of Polycarbonate, suitable for B-22 type lamp polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including 10 Watt LED lamp complete all as specified and directed.
S&F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixing on wall/pole with GI pipe bracket made of GI pipe 25 to 40 mm light grade 1.2 m long bent to shape and grouting on wall with necessary MS nuts, bolts and washers complete all as specified and directed.
M&L for Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.5 of SSR Part-I connected to earth test point all as specified or indicated including testing on completion, complete all as specified and directed.
M&L for concealed submain wiring with two RUNS of single core 4 sqmm stranded copper conductor PVC insulated FRLS type cables for phase and neutral alongwith additional one run of 4 Sq mm stranded copper conductor PVC insulated cable green colour drawn through and including rigid PVC conduit ISI marked not less than 20 mm dia with all accessories, and necessary cutting, chasing & making good disturbed surface to match the existing complete all as specified & directed. Note : (i)Two run of 4 Sq mm single core for Phase /neutral one run of 4 sq mm as earth wire and one run of PVC conduit will be measured as 1 RM unit. (ii) Cost of cutting chasing and it making good disturbed surface to match the existing surface (where ever required) deemed to be included in quoted rates.
Taking down existing ceiling fan / exhaust fan, any sweep, by disconnecting carefully all electric connection and refixing the same after necessary repair work as required (such as cleaning all the serviceable parts thoroughly, reassembling the fan after testing for proper functioning), with and including provision of electrical wire 3-core 23/0.0076 copper conductor, spray painting with synthetic enamel paint of tint same as that of existing, and wiriting MES No. on fan motor, complete all as specified and directed. NOTE : The quoted rates shall deemed to be inclusive of every minor items i.e., nut, bolts, screws, lugs etc., which are fairly required for the smooth functioning of fans.
Taking down carefully existing geyser by disconnecting all electrical connection and refixing the same making electric connection with and including wire 3 core 23/0.0076 copper conductor and PVC connections complete all as specified and directed.
S&F two pin and earth plug and socket with 1 MCB single pole 20 to 32amps C series 10KA in sheet metal enclosure and connecting complete all as specified and directed.
Supplying ,laying, commissioning & testing XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor, cross sectional area 35 Sqmm , 3.5 core complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item
Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans complete all as specified and directed. Note: cost for drilling Suitable dia of hole in the wall deemed fit in quoted rate
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exceeding 25 Cm, Providing Heaps along the Route of the Water Mains, Cable Lines, etc. with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.
Removing Excavated Materials (Soils) not exceeding 50.00 Metre and depositing where directed at a level not exceeding 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.
Supply and laying dry well burnt locally available brick sub class'B' old size bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed
M&L for Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.
vs construction
KHALSA BUILDER
KRISHNA BAHADUR
M/S A P CONSTRUCTION
Shivagya Engineering
Hi-Tech Constructions
shweta constructions
M/S GOPAL JEE SINGH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .