Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC H NO 920 SEC 16 17 HISAR HARYANA 125005 | HISAR | HISAR | HARYANA | 125005 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.5 L+₹57,295 (2.88%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹21.4 L+₹1.5 L (7.66%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹21.9 L+₹2.0 L (10.1%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹23.4 L+₹3.5 L (17.4%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹28.3 L
EMD Value
₹57,000
Closing Date
13 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (W) HISAR
GE (W) HISAR HISAR MIL STN HISAR PIN 125006
GE (W)/HSR-30/2023-24 SPL REPAIR TO BLDG NO P-524 (SINGLE OFFR ACCN) AT OFFR MESS, 21 MECH INF REGT AT HISAR MIL STATION UNDER GE (W) HISAR
2023_MES_618546_1
GE(W)/HSR-30/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (W) HISAR
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE (W) HISAR
₹57,000
Yes
29 Jan 2024
13 Sept 2023
16 Oct 2023
13 Sept 2023
13 Oct 2023
29 Sept 2023
Amount
Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified.
M&L for 10mm thick rendering in CM 1:6 over brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete.
M&L for rendering 15 mm thick in CM 1:4 on stone/brick/ concrete masonry surfaces with using integral water proofing compound finished even and smooth without using extra cement all as specified and directed by Engineer-in-charge
M&L Rendering 10 mm thick cement plaster on ceiling surfaces in CM(1:3) complete.
M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete
M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over and including one coat of 1.5mm thick wall care putty all as complete.
M&L for complete removal of existing treatment / paint of any description of walls (any number of layers ) by scrapping with steel scrappers or with other mechanical means including applying 1 mm thick wall care putty to smooth finish complete all as specified and as directed and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-charge
M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling all as complete and directed by Engr-in Charge.
M&L for preparation of old plastered or unplastered surfaces of ceiling / soffit and applying one coats of white wash all as directed and specified.
M&L for preparation of new surfaces of wood or wood based mtrls of any desc over 10cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.
M&L for two coats of synthetic enamel paint on steel surfaces of any description over 10cm in width or girth not otherwise described incl prepartion of new surfaces
M&L for preparing new plastered or unplastered surface of walls and applying two coats of weather proof paint using roller of .make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of four years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of guarantee complete all as specified and directed. Note:- (1)Painting shall only be started in any Bldg after completion of Structural Repair work of that Bldg to the full satisfaction of Engr-In-Charge.(2) After preparation of surface ,approval shall be obtained from Engr-In-Charge before applying primer and further treatment/coat
M&L for preparing old plastered or unplastered surface of walls with and including complete removal of existing treatment of any layer of wall using mechanical sander with internal dust extraction system and applying two coats of weather proof paint using roller of .make : apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of three years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of guarantee complete all as specified and directed. Note:- (1)Painting shall only be started in any Bldg after completion of Structural Repair work of that Bldg to the full satisfaction of Engr-In-Charge.(2) After preparation of surface ,approval shall be obtained from Engr-In-Charge before applying primer and further treatment/coat.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified complete.
M&L for coloured glazed ceramic coloured tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat in CM 1:3 complete all as specified. complete all as specified.
M & L for Vitrified ceramic tiles 10mm thick (square /rectangular ) polished , coloured area of each tiles not.exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 10 mm thick screed bed in CM 1:4 complete all as specified.
M & L for Vitrified ceramic tiles 10mm thick (square /rectangular ) polished, coloured area of each tiles not.exceeding 0.36 Sqm as in vertical surfaces etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 10mm thick screed bed in CM 1:3 complete all as specified.
M&L for 20 to 25mm thick machine cut Kota stone flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified over and including 20mm thick screed bed in CM 1:3 complete
-ditto - all as item No 19.00 above but kota stone slab (100/150mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar and polishing complete all as 1:3 and jointed complete as in single piece kota stone has to be used.
Rounding to edges of stone edges such as in steps/ cooking platform and other similar situations all as specified.
M&L for 300x300x10mm non-skid coloured exterior tile grade tile in floor set & jointed in cement slurry over 15mm thick cement screed 1:6 complete all as specified.
M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed all as specified including taking down of pipe.
Same as item as 23.00 above (15 mm) but refixing and taking down.
M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade concealed all as specified.
Same as item No 25.00 above (20 mm) but refixing and taking down.
S&F in repairs 15mm bore CP Bib taps Long Body Half turn/Quarter turn , cast copper alloy fancy type chromium plated and fixed complete.
S&F in repair 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore all as complete.
S& F in repair PVC connection 450 mm long 15mm dia complete.
S&F 15mm dia Brass CP Basin/Sink mixture chromium plated fancy type long body for mixing hot & cold water screwed down for iron pipe and fixed in repair all as complete
S&F in repairs 15mm dia CP Brass wall mixture chromium plated fancy type for mixing hot and cold water screwed down for iron pipe and fixed in posn all as specified and directed .
S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including PVC 'P' or 'S' trap and connection to trap includintg cement concrete, with PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern etc. including making good to floor, complete all as specified
S&F Vitreus china wash down water closet pan (Padestal pattern )while excluding ,flushing cistern , flushing pipe and inclusive of fixing bolt, plastic water closet seat cover and mild steel chromium plated or aluminised hinging comlpete inclusive taking down of old WC of any type and complete all as spd and directed
S&F in repair CP Bass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as spd and directed
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.
S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.
S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.
S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
Supply & Fixing in repair of vitreous china wash hand basin flat back size 550x400mm and including brackets and CP waste coupling 32mm dia and PVC waste pipe, complete as directed.
S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charge.
S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union
Supply and fixing in repair rotional molded polythylene water storage tank three layer white 500 ltr capacity, triple layer (Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified including dismantling of tank.
S&F in repair 20mm dia ball valves high pressure of PTMTwith epoxy coated alluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified.
S & F in repair gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed etc complete.
Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) M&L for Demolition/cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting & WPC will be measured and paid separately). (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and direced by EIC. (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured and paid separately) (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-1 all round after painting with anticorrosive paint. (ix) after above process, sunken portion shall be filled with PCC 1:5:10 completely and 40 mm thick PCC 1:3:6 shall be provided at the top surface. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debries obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts.
Supply only water proofing compound.
S&F, PVC floor trap 75mm bore with grating incl jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as directed lby Engr-in-Charge.
Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3.
Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15cm thick below or above ground level
M& L for 75mm thick PCC 1:3:6 type C-2 (Using 20mm gradede crushed stone aggregate ) as in plinth protection including mastic filling in joints complete . all as specified and directed.
Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each.
Taking down chowkats or frame without taking off shutters(with or without glazing and ventilator) not exc 1.5 Sqm each.
Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 125mmx65mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for external uses complete all as specified and directed.
S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded.The rates include for painting with one shop coat of zinc chromate primer. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.
S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete w/o glazing bars devetailed or welded. The rates include for painting with one shop coat of zinc chromate primer. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.
S&F steel ventilator box type with top hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.
S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete
S&F Glass pane ordinary quality 3mm thick not exc 0.50 sqm each pane with fixing clips ,putty or wooden beads to wooden/steel frames with and including MS glazing clips not less than 6 Nos per pane and making good the surface matching existing surface complete incl hacking out old broken glasses all as complete.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick Prelam PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6
S&F , 30 mm thick factory made solid PVC Moulded Door Shutter with Wood Free EPS, with 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on front & back face and all as spd in SSR and directed by Engre-In-Charge make : Rajshri
S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete as directed
S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed.
S&F 125 mm extruded aluminium alloy handles fabricated type.
S&F aluminium anodised barrel tower bolt of extrued section 150 mm long all as specified.
S&F 250 mm long aluminium alloy anodized sliding doot bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixining biolts abd sliding bolts of extruded section or cast aluminium alloy complete all as specified.
S&F superior quality ,heavy type SS rail (grade -304) (Cu rtain rod/drapery rod), 20mm dia with and including fency type SS bracket 2 Nos for each opening and SS side Knob (fency type) of required shape and size 2 Nos of each opening complete all as specified and directed.
S&F butt hinges 100mm medium weight and fixed with steel frames by means of welding and riveting complete.
S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .
S&F 300mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F Floor door stopper of aluminium alloy body 50 mm long with rubber shoes and all as spd
M&L Brick work with burnt bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete including demolition of brickwork.
Dismantling brick tiles in single layer on roof (laid dry and pointed)
Demolition Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof)and removing debries out of MD land as directed.
M&L for providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) as in roof kerbs, Roof padding finishing surface of concrete topping even and fair(without using extra cement) all as specified of average thickness 50 mm in slope 1:40 over roof complete all as specified and directed.
M&L Screed bed or bedding layer of mortar 10mm thick in cement mortar 1:3 and finishing even and smooth with mixing of liquid WPC on roof surfaces. Note : WPC shall be measured and paid seperately.
M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) with white mineral gravel finish on upper side of membrane laid by torch application method with overlap 100 on length and 100mm on the width side as per manufacture's instructions over a coat of hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete APP membrane all as specified and directed by engineer-in-charge
S&F mild steel joist ,channel ,angle ,tee fixed independently without connection plates etc (cut to ordinary length i.e. within 20mm of the length indicated ) complete all as spd and directed and cutting holes complete.
S&F prepainted galvalume alumimium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 MPA as a roof covering /Cladding to wall and in Chajjah , Fixed with self tapping screw complete all as spd and directed
Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.
Mild steel TMT bars 6 to 8 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.
M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square / rectangular / circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:4 including necessary use and waste of formwork and demolition of existing RCC cover slabs complete
M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture SIKA Plasto creat plus or equivalent make in Fosroc / Thermax as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. the gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions and directed by Engineer-in-charge.
Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar
Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.
M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.
M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness of upto 10mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructionscomplete all as specified and directed.
S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved. Note : Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed. Note: front face shall only be measured for payment purpose.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.
S&F 150 mm dia(6") reinforced concrete pipes,class NP2 with one collar per length of pipe and laid in trenches or in floors including clearing of site as per site requirement complete all as specified and directed by Engr in charge.
Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for 50mm Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.
M & L for 50mm thick cement concrete type B – 1 (1:2:4) using 20mm graded stone aggregate as in Floor/path and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
Cutting into existing manholes for connecting new drains, 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete.
Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete and directed by engr in charge
Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified
All as per item No 102.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board
All as per item No 102.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board
All as per item No 102.00 above but point wiring with 2.5 sq mm single core FR cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd.
S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed
S&F Modular switch 1 way 16A 1 module all as specified and directed
S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.
S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.
M&L Buzzer, Ding Dong AC 230 volts, single pole ISI Marked,all as specified & directed
Supply and fixing modular bell push 6A 1 module all as specified and directed.
S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed
S&F modular fan step regulator 120W-2 module suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed
S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.
S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.
Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB
Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB
S&F i Sheet metal enclosure distribution board VTPN,6way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed
Supply and fixing MCCBs FP 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCCB should be the same as that of DB
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.
Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.
M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
M&L for providing/cutting the round/ square hole of reqd size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type ac ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side ( outer surface of the wall ) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as specified.
Puja Traders
NAVIN KUMAR
malik constructions
Shiva Constructin Co.
P.K. ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .