Loading…
Loading…
Tender Value
₹191.1 Cr
EMD Value
₹3.8 Cr
Closing Date
26 May 2026, 11:30 amClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
Yes
07/05/2026 11:30
Lowest to Highest
90 days
Expenditure
Capital (Works)
WORKS
16 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Numberofyearsprescribedforcompletionofworkforwhichbidshavebeeninvited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any of the following (From Govt. Organization) during last 07(seven) years, ending last day of the month previous to the one in which tender is invited. Three similar works each costing not less than the amount equalto30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Detail instruction as per clause2.3 of tender document.
Definition of Similar Work:-Civil Engineering works involving construction of Railway / Road bridge of clear span of 12.2m or more. The bridge work should include both sub- structure and super structure components.
36 conditions · 4 needing a document upload
As per Tender document.
Mandatory details to be filled in by Tenderer while submitting their offer as per ANNEXURE-D (Constitution of firm) of tender document.
The original Bank Guarantee should be delivered in person to the Deputy Chief Engineer/Construction/RSP-II , O/o CAO/C/RSP, Northern Railway, Konnectus Tower, Ajmeri Gate, New Delhi-110002 before closing date of submission of bids (i.e. excluding the last date of submission of bids).
Tenderers are compulsorily required to upload Certificate as per Annexure M and Annexure M (A), as the case may be, as stipulated in Clause 2.2.6 of Special Tender Conditions and instruction to tenderers without which the offer will be considered incomplete and will be rejected summarily.
The tenderers must necessarily upload/submit the legal documents, pertaining to the constitution of their Concern as applicable, along with the tender, as enumerate in clause 2.4 of spl tender condition and instruction to tenderers of tender document.
Tenderer shall certify that they are not black listed or debarred by Railways or any other Ministry/ Department/PSU (Public Sector undertaking) of the Govt. of India/State Govt. from participation in tenders/contract on the date of opening of bids either in their individual capacity or as a member of the JV frm in which they were/are members.
Tender must compulsorily upload ANNEXURE-Q regarding Employment/Partnership etc. of Retired Railway Employees without which tender will be summarily rejected.
Submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code as per Annexure-J (Real Time Gross Saving (RTGS)/National Electronic Fund Transfer (NEFT) (Model Mandate Form)) of tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Construction of 03 ROBs (i) 2 lane ROB including approaches with LHS in lieu of LC No 108C at Km 947.353 on Utratia- Sultanpur section in Lucknow division (ii) 2 lane ROB with approaches in lieu of LC No 138AC at Km 973.806 (Sindurwa) Utratia- Sultanpur Section in Lucknow Division (iii) 2 lane ROB at LC 43A at Railway KM Ch 830/7-8 between Jaunpur and Shahganj Railway station in Lucknow division on Northern Railway, under the Road Safety Project Unit (RSPU)/NR New Delhi.
22-W-09-2026-WA-DyCEC-RSP
22-W-09-2026-WA-DyCEC-RSP
Open
Works - General
18 Months
Unknown (Unspecified Location)
₹0
₹3.8 Cr
26 May 2026
29 Apr 2026
12 May 2026
7 May 2026
550 items across 38 schedules · ₹2,11,27,86,730.38 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Earthwork in filling in embankment, guide bunds, around buried type abutments, bridge gaps, trolley refuges, platforms etc. with contractor's own earth conforming to Soil Quality Class SQ1/SQ2/SQ3, after preparation of foundations as applicable, benching in existing banks wherever required, spreading in layers with motor grader, bringing the moisture content to OMC, mechanical compaction to specified density a n d dressing of bank to final profile as per RDSO Specifications: RDSO/2020/GE: IRS-0004 with latest correction slips. Note: 1) Foundation preparation, Benching including additional earthwork on account of this, wherever required, shall be paid extra under relevant schedule item for benching. 2) Payment for Earthwork under this item shall be made based on the cross section measurements calculated (i) with original ground profile of existing bank based on initial ground levels before doing benching and (ii) final profile of the bank worked out with final levels as per prevailing guidelines. | — | — | — | — | |
| 1 | Using Soil Class SQ2 | cum | 63000.00 | 352 | 2,21,76,000 |
| 2 | Foundation preparation in cutting - ploughing and pulverizing 15 cm of top of soil with tractor trolley, mixing water to achieve OMC with water sprinkler or allowing for natural drying, as required, and compaction with vibratory roller of suitable capacity to achieve 98% MDD for laying blanketing layer. | 100 Sqm | 10500.00 | 209.44 | 21,991.2 |
| 3 | Manufacturing of blanketing material by wet mixing of naturally available suitable soil including additional blending with naturally available or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips. | cum | 450.00 | 988.63 | 4,44,883.5 |
| Turfing / planting, including all lead & lift and watering as required until properly rooted with. Note: Initially payment of only 40% will be made. Balance 60% will be paid after 3 months of maintenance period, only if the turfing is properly rooted on entire turfed area. | — | — | — | — | |
| 4 | Turfing with sods, 10cm thick and 20cm square closely laid. | 100 Sqm | 400.00 | 27,446.45 | 1,09,785.8 |
| Providing portable fencing along running track where work is to be done in close vicinity of track, maintaining during execution of work and removing after completion of the work as per direction of the Engineer. Fencing shall consist of self supporting steel angles of size 50mm x 50mm x 6mm, 1.5m long provided with hooks etc. and embedded in CC 1:2:4 block of size 0.23m x 0.23m x 0.23m placed at c/c distance of 2m along track. 12mm dia rods in three horizontal layers shall be tack welded with angle posts. Note : Released material will be property of the contractor after completion of work. Cost of cement required for CC blocks shall be paid separately. | — | — | — | — | |
| 5 | With provision of one 50mm wide retro- reflective tape in horizontal direction, duly secured/tight with vertical posts. | Metre | 3300.00 | 261.56 | 8,63,148 |
| 6 | Shoring with 'Z' section MS sheet piles side by side in all kinds of soil mechanically or manually as per approved drawing with contractor's own arrangement complete in all respects and removal of sheet piles after completion of the work as directed by engineer in- charge Note: Payment will be made as per actual driven length of pile. | Sqm | 3470.00 | 1,036.39 | 35,96,273.3 |
| Supplying, laying Non-woven Needle Punched and Mechanically or Thermally bonded type Geotextile for use as Separator/Filtration for Railway formation as per RDSO Specification No. RDSO/2018/GE:IRS-0004 - Part I made of Polypropylene / Polyethylene / Polyamide or combination there of having apparent opening size of less than or equal to 85 microns and elongation at failure more than 50% in both directions including transportation labour, lead & lift complete as directed by Engineer in-charge. | — | — | — | — | |
| 7 | On top of subgrade or prepared subgrade before laying blanketing layer with minimum strengths in Grab test, Trapezoidal Tear test and Puncture test of 700N, 250 N and 1800 N respectively. | Sqm | 2300.00 | 248.62 | 5,71,826 |
| 8 | Supplying & laying of drainage composite for use behind abutments, wing walls, return walls and Retaining walls Geocomposite drain (Vertical) as per RDSO Specification No. RDSO/2018/GE:IRS-0006 latest version with all material, labour, equipment, tools and plants, lead, lift etc. complete in all respects as per the direction of Engineer- in-Charge. | Sqm | 1000.00 | 626.86 | 6,26,860 |
| Schedule total | ₹2,84,10,767.8 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentforLC108C138AC43Adated29.04.2026.pdf TenderDocument
ATTACHMENT
SPECIALCONDITIONSLC108C138ACand43A29.04.2026.pdf SpecialCondition
ATTACHMENT
ROB108CRev_compressed.pdf
ATTACHMENT
ROB138ACrev_compressed.pdf
ATTACHMENT
TenderDocumentforLC108C138AC43Adated29.04.2026.pdf
ATTACHMENT
SPECIALCONDITIONSLC108C138ACand43A29.04.2026.pdf
ATTACHMENT
Prebidreplytender22.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .