Renovation of Ladies Toilet located at Seat and Safety, Jaguar, Mirage Hangars and Establishment of Gents and Ladies Washroom at Senior Executive Canteen in Overhaul Division, HAL BC Including Electrical Works.

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Renovation of Ladies Toilet located at Seat and Safety, Jaguar, Mirage Hangars and Establishment of Gents and Ladies Washroom at Senior Executive Canteen in Overhaul Division, HAL [BC] – [Including Electrical Works]. CONTRACT NO. HAL/FMD/R-79/24-25

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.

DISMANTLING AND DEMOLITION

1 Demolishing brick work built in cement mortar, manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 8.50 Cu m 1892.77 Rupees One Thousand Eight Hundred Ninety Two and Seventy Seven Paise Only 16088.55

2 Demolishing cement concrete of nominal 1:4:8 or leaner mix manually / by mechanical means including disposal of material within 50 metres, etc., all complete as directed by Engineer-in-Charge. 6.00 Cu m 1381.40 Rupees One Thousand Three Hundred Eighty One and Forty Paise Only 8288.40

3 Dismantling tile work in floors and roofs (for thicknes of tiles 10mm to 25mm) laid in cement mortar including stacking material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 210.00 Sq m 67.43 Rupees Sixty Seven and Forty Three Paise Only 14160.30

4 Dismantling of old plaster or skirting raking out joints and cleaning the surrface for plaster including disposal of rubbish to the dumping ground within 50meters lead, etc., all complete as directed by Engineer-in-Charge. 150.00 Sq m 50.21 Rupees Fifty and Twenty One Paise Only 7531.50

5 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba, etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 123.20 Rupees One Hundred Twenty Three and Twenty Paise Only 985.60

6 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 102.94 Rupees One Hundred Two and Ninety Four Paise Only 823.52

7 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 51.77 Rupees Fifty One and Seventy Seven Paise Only 1035.40

CARRIAGE AND DISPOSAL

8 Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10km for all lifts, etc., all complete as directed by Engineer-in-Charge. Note: Item to be applicable in urban areas having direction for restricted hours for movement / plying of laod carrying motor vehicke of 3.50Cu m or more. 55.00 Cu m 453.94 Rupees Four Hundred Fifty Three and Ninety Four Paise Only 24966.70

EARTH WORK AND RE-FILLING

9 Earth work in Excavation in all kinds of soil by mechnaical means (Hydraulic excavator) / manual means in foundation trenches or drains(not exceeding 1.50m in width or 10Sq m on plan) including dressing of sides and ramming of bottoms for all all lifts including getting out the excvated soil and disposal of surplus soil as directed within a lead of 50m, etc., all complete as directed by Engineer-in-Charge. 18.00 Sq m 239.15 Rupees Two Hundred Thirty Nine and Fifteen Paise Only 4304.70

10 Filling available earth (excluding rock) in trenches, plinth, sides of foundation, etc., in layers not exceeding 20cm, consolidated each deposited layer by ramming and watering lead up to 50 and foll all lift, etc., all complete as directed by Engineer-in-Charge. 13.00 Cu m 180.07 Rupees One Hundred Eighty and Seven Paise Only 2340.91

11 Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) with common burnt clay F.P.S. (non modular) bricks class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes, etc., all complete as directed by Engineer-in-Charge. 11.00 Cu m 8584.92 Rupees Eight Thousand Five Hundred Eighty Four and Ninety Two Paise Only 94434.12

12 Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level, etc., all complete as directed by Engineer-in-Charge. 40.00 Sq m 1057.00 Rupees One Thousand Fifty Seven Only 42280.00

13 Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall, etc., all complete as directed by Engineer-in-Charge. 280.00 Sq m 351.87 Rupees Three Hundred Fifty One and Eighty Seven Paise Only 98523.60

14 Providing and laying in position cement concrete of specified grade(1:4:8 -1 cement : 4 manufactured sand derived from Recycled concrete aggregates: 8 graded stone aggregates 40mm nominal size recycled aggregates) excluding the cost of centering and shuttering - All work up to plinth level, etc., all complete as directed by Engineer-in-Charge. 4.00 Cu m 4782.21 Rupees Four Thousand Seven Hundred Eighty Two and Twenty One Paise Only 19128.84

15 Providing and laying cement concrete (1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge. 7.00 Cu m 8885.49 Rupees Eight Thousand Eight Hundred Eighty Five and Forty Nine Paise Only 62198.43

16 Steel reinforcement (Thermo-Mechanically Treated bars of grade Fe-500D or more) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, etc., all complete as directed by Engineer-in-Charge. 120.00 Kgs 99.08 Rupees Ninety Nine and Eight Paise Only 11889.60

17 Centering and shuttering including strutting, propping, etc., and removal of form for small lintels not exceeding 1.50m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and like, etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 360.28 Rupees Three Hundred Sixty and Twenty Eight Paise Only 7205.60

STRUCTURAL STEEL WORKS

18 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 615.00 Kgs 122.83 Rupees One Hundred Twenty Two and Eighty Three Paise Only 75540.45

WOODEN DOORS AND FITTINGS

19 Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of required dia and length (hold fast lugs or dash fasterner shall be paid for separtely, etc., all complete as directed by Engineer-in-Charge. 0.18 Cu m 131332.01 Rupees One Lakh Thirty One Thousand Three Hundred Thirty Two and One Paise Only 23639.76

20 Providing [40 x 5]mm flat iron hold fast 400mm long including fixing to frames with 10mm dia bolts, nuts and wooden plugs and embeddding in cement concrete block [300 x 100 x 150]mm 1:3:6(1 cement:3 coarse sand:6 Graded stone aggreagtes 20mm nominal size), etc., all complete as directed by Engineer-in-Charge. 20.00 Nos 210.25 Rupees Two Hundred Ten and Twenty Five Paise Only 4205.00

21 Providing and fixing ISI marked flush door shutters conforming to IS :2202(Part-I) Decorative type, core of block construction wit frames of 1st class hard wood and well matched teak 3 ply veenering with vertical grains or cross bands and face veneers on both sides of shutters, 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws, etc., all complete as directed by Engineer-in-Charge. 11.00 Sq m 2910.49 Rupees Two Thousand Nine Hundred Ten and Forty Nine Paise Only 32015.39

22 Providing and Fixing alumnium tower bolts [250 x 10]mm size, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 44.00 Nos 105.79 Rupees One Hundred Five and Seventy Nine Paise Only 4654.76

23 Providing and Fixing alumnium handles 125mm long, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 32.00 Nos 60.87 Rupees Sixty and Eighty Seven Paise Only 1947.84

24 Providing and Fixing alumnium hanging Single rubber floor door stopper, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 36.38 Rupees Thirty Six and Thirty Eight Paise Only 109.14

25 Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 ) alumnium lever handles of approed quality with necessary screws, etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 798.33 Rupees Seven Hundred Ninety Eight and Thirty Three Paise Only 3991.65

26 Providing and Fixing alumnium extruded section body tubular type universal hydralic door closer (having brand logo with ISI mark) embosed on the body, door weight up to 36kgs to 80kgs and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 903.25 Rupees Nine Hundred Three and Twenty Five Paise Only 4516.25

27 Providing and fixing ISI marked oxidised MS door latches of size [300 x 20 x 6]mm conforming to IS 5930 with screws (copper oxidised as per IS 1378), etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 90.36 Rupees Ninety and Thirty Six Paise Only 451.80

WPC DOORS AND SHUTTERS FOR TOILET

28 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of size [45 x 85]mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kgs/Cu m, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length, etc., all complete as directed by Engineer-in-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 75.00 R m 851.06 Rupees Eight Hundred Fifty One and Six Paise Only 63829.50

29 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 30mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 Kgs/Cu m and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, etc., all complete as directed by Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 25.00 Sq m 3993.44 Rupees Three Thousand Nine Hundred Ninety Three and Forty Four Paise Only 99836.00

30 Providing and Fixing IS 12817 marked stainless steel butt hinges of size [125 x 64 x 1.90]mm with stainless steel screws, etc., all complete as directed by Engineer-in-Charge. 34.00 Nos 108.59 Rupees One Hundred Eight and Fifty Nine Paise Only 3692.06

WATER SUPPLY AND DRAINAGE PIPES AND FITTINGS

31 Providing and fixing on wall face unplasticised Rigid PVC Single Socketed rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge.

a) 75mm dia 30.00 R m 228.58 Rupees Two Hundred Twenty Eight and Fifty Eight Paise Only 6857.40

b) 110mm dia 100.00 R m 346.73 Rupees Three Hundred Forty Six and Seventy Three Paise Only 34673.00

c) 160mm dia 55.00 R m 1015.25 Rupees One Thousand Fifteen and Twenty Five Paise Only 55838.75

32 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge.

i) 75mm diameter 8.00 Nos 84.25 Rupees Eighty Four and Twenty Five Paise Only 674.00

ii) 110mm diameter 8.00 Nos 125.08 Rupees One Hundred Twenty Five and Eight Paise Only 1000.64

b) Single tee with door

i) 75x75x75 8.00 Nos 150.86 Rupees One Hundred Fifty and Eighty Six Paise Only 1206.88

ii) 110x110x110 5.00 Nos 215.12 Rupees Two Hundred Fifteen and Twelve Paise Only 1075.60

c) Bend 87.5 degree

i) 75mm bend 8.00 Nos 97.29 Rupees Ninety Seven and Twenty Nine Paise Only 778.32

ii) 110mm bend 12.00 Nos 138.13 Rupees One Hundred Thirty Eight and Thirteen Paise Only 1657.56

i) 75mm shoe 8.00 Nos 85.53 Rupees Eighty Five and Fifty Three Paise Only 684.24

ii) 110mm shoe 11.00 Nos 121.13 Rupees One Hundred Twenty One and Thirteen Paise Only 1332.43

33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, for Internal Work having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as directed by Engineer-in-Charge.

a) 15mm nominal dia Pipes 60.00 R m 457.34 Rupees Four Hundred Fifty Seven and Thirty Four Paise Only 27440.40

b) 20mm nominal dia Pipes 12.00 R m 493.91 Rupees Four Hundred Ninety Three and Ninety One Paise Only 5926.92

34 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, for External Work having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as directed by Engineer-in-Charge.

a) 20mm nominal dia Pipes 18.00 R m 252.01 Rupees Two Hundred Fifty Two and One Paise Only 4536.18

b) 32mm nominal dia Pipes 150.00 R m 402.95 Rupees Four Hundred Two and Ninety Five Paise Only 60442.50

35 Supplying and fixing jointing following Chlorinated polyvinyl chloride (CPVC) gate valves of approved brand and manufacture laid in trenches and by clamps on walls and ceiling with necessary cutting, Jointing including supplying, fixing all necessary CPVC specials such as bend, elbows, union, tee, nipple, collars, reducers, etc., all complete as directed by the Engineer-in-Charge.

a) 15mm dia 10.00 Nos 169.97 Rupees One Hundred Sixty Nine and Ninety Seven Paise Only 1699.70

b) 25mm dia 6.00 Nos 456.83 Rupees Four Hundred Fifty Six and Eighty Three Paise Only 2740.98

CERAMIC FLOOR AND WALL TILES

36 Providing and laying rectified Glazed Ceramic floor tiles of size [300 x 300]mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.30Kgs / Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge. 60.00 Sq m 1221.91 Rupees One Thousand Two Hundred Twenty One and Ninety One Paise Only 73314.60

37 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30 Kgs per Sq m, including pointing in white cement mixed with pigment of matching shade, etc., all complete as directed by Engineer-in-Charge. 255.00 Sq m 1164.90 Rupees One Thousand One Hundred Sixty Four and Ninety Paise Only 297049.50

38 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre, etc., all complete as directed by Engineer-in-Charge. 140.00 Sq m 67.94 Rupees Sixty Seven and Ninety Four Paise Only 9511.60

39 Providing and applying white cement based wall care putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge. 140.00 Sq m 143.37 Rupees One Hundred Forty Three and Thirty Seven Paise Only 20071.80

40 Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge. 140.00 Sq m 131.19 Rupees One Hundred Thirty One and Nineteen Paise Only 18366.60

41 Finishing walls with Premium Acrylic Smooth exterior paint (Two or more coats on Old Work, applied @ 1.43 ltr/ 10Sq m) over existing cement paint surface) with Silicone additives of required shade, etc., all complete as directed by Engineer-in-Charge. 90.00 Sq m 120.63 Rupees One Hundred Twenty and Sixty Three Paise Only 10856.70

42 Removing dry or oil bond distemper ,water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by Engineer-in-Charge. 30.00 Sq m 18.14 Rupees Eighteen and Fourteen Paise Only 544.20

43 Distempering one or more coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge. 30.00 Sq m 57.60 Rupees Fifty Seven and Sixty Paise Only 1728.00

ALUMINIUM WORKS

44 Providing and fixing Powder coated aluminium(min thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket, etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately) 50.00 Kgs 487.75 Rupees Four Hundred Eighty Seven and Seventy Five Paise Only 24387.50

45 Providing and fixing 12mm thick pre-laminated particle board (decorative lamination on one side and balancing lamination on other side) flat pressed three layer or graded wood particle board confirming to IS:12823 Grade I,type II, in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass/stainless steel screws, etc., complete as per architectural drawings and directions of Engineer-in-Charge. Pre-laminated particle board with decorative lamination on both sides. 2.00 Sq m 1046.71 Rupees One Thousand Forty Six and Seventy One Paise Only 2093.42

46 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., complete as per the architectural drawings and the directions of Engineer-in-Charge With float glass panes of 5.0mm thickness (weight not less than 12.50 Kgs/Sq m), etc., all complete as directed by Engineer-in-Charge. 5.00 Sq m 1382.92 Rupees One Thousand Three Hundred Eighty Two and Ninety Two Paise Only 6914.60

SANITARY FIXTURES AND FITTINGS

47 Providing and Fixing water closet squatting pan (indian type W C pan) with 100mm sand cast iron P or S trap ,10 litrs low level white PVC flushing cistern including flush pipe with manually controlled device (hand lever) confirming to IS:7231 with all fittings and fixtures complte including cutting and making good the walls and floors wherever required, Vitreous chine orissa pattern WC pan size 580x440mm with intergral type foot rests, etc., all complete as directed by Engineer-in-Charge. 6.00 Nos 6217.41 Rupees Six Thousand Two Hundred Seventeen and Forty One Paise Only 37304.46

48 Providing and Fixing water closet squatting pan(European type W C pan) with 100mm sand cast iron P or S trap, 10 litrs low level white PVC flushing cistern including flush pipe with manually controlled device (hand lever) confirming to IS:7231 with all fittings and fixtures complte including cutting and making good the walls and floors wherever required, Vitreous chine orissa pattern WC pan size 580x440mm with intergral type foot rests, etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 5986.02 Rupees Five Thousand Nine Hundred Eighty Six and Two Paise Only 29930.10

49 Providing and fixing white Vitreous china wash basin size 550x400mm with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 1726.48 Rupees One Thousand Seven Hundred Twenty Six and Forty Eight Paise Only 3452.96

50 Providing and Fixing white vitreous china pedestal for wash basin compltely recessed at the back for the reception of pipes and fittings, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 1546.54 Rupees One Thousand Five Hundred Forty Six and Fifty Four Paise Only 3093.08

51 Providing and Fixing of required size of oval shaped counter sink wash basin in the granite counter including fixing of Pillar cock with aerator, waste coupling, wash basin waste pipe, water connection pipe, angle cock, etc., all complete as directed by Engineer-in-Charge. (Waste pipe, 300mm long water connection & angle cock shall be measured and paid separately). Wash basin make : Cera/Parryware/hindware /any other apporved HAL make ) 6.00 Nos 6247.95 Rupees Six Thousand Two Hundred Forty Seven and Ninety Five Paise Only 37487.70

52 Providing and fixing long flat back urinal of HAL approved make, size, colour comprising of Spreader, Auto closing Urinal value, 32mm waste coupling (fully threaded), and other fittings, etc., cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge. Urinal and fitting makes: CERA/HINDWARE/PARRYWARE/JAGUAR/or any other HAL approved makes.(Urinal waste pipe and 300mm long PVC water connection pipes shall be paid separately) 2.00 Nos 11647.51 Rupees Eleven Thousand Six Hundred Forty Seven and Fifty One Paise Only 23295.02

53 Providing and fixing 15mm dia nominal bore CP brass bib cock of approved quality, etc., all complete as directed by Engineer-in-Charge. 11.00 Nos 465.61 Rupees Four Hundred Sixty Five and Sixty One Paise Only 5121.71

54 Providing and Fixing 100mm nominal dia circular type PTMT grating of approved quality and colour, etc., all complete as directed by Engineer-in-Charge. 26.00 Nos 34.54 Rupees Thirty Four and Fifty Four Paise Only 898.04

55 Providing and fixing 8mm dia CP / SS jet with flexible tube up to 1 meter long with SS triangular plate to Eureopean type WC of quality and make as approved, etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 320.77 Rupees Three Hundred Twenty and Seventy Seven Paise Only 1603.85

56 Providing and fixing P.V.C. waste pipe (Semi regid pipe 32mm dia) for sink or wash basin including P.V.C. waste fittings, etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 95.46 Rupees Ninety Five and Forty Six Paise Only 954.60

57 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour, 15mm nominal bore with 30cm long, etc., all complete as directed by Engineer-in-Charge. 20.00 Nos 78.09 Rupees Seventy Eight and Nine Paise Only 1561.80

58 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms, etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 154.67 Rupees One Hundred Fifty Four and Sixty Seven Paise Only 1237.36

59 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge. 20.00 Nos 527.63 Rupees Five Hundred Twenty Seven and Sixty Three Paise Only 10552.60

60 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms, etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 102.39 Rupees One Hundred Two and Thirty Nine Paise Only 819.12

61 Providing aand fixing 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms, etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 651.33 Rupees Six Hundred Fifty One and Thirty Three Paise Only 3256.65

62 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size [1500 x 450]mm with plastic moulded frame of approvedmake and shade with 6mm thick hard board backing, etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 1922.90 Rupees One Thousand Nine Hundred Twenty Two and Ninety Paise Only 5768.70

63 Providing and fixing mirror of superior glass (of approved quality) andof required shape and size [453 x 357]mm with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 1251.12 Rupees One Thousand Two Hundred Fifty One and Twelve Paise Only 2502.24

64 Providing and fixing Granite stone slab of approved shade finished smooth with table rubbed, edges rounded and polished, of size [75 x 50]cm deep and 1.80cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size), etc., all complete as directed by Engineer-in-Charge. 1.00 Sq m 3722.55 Rupees Three Thousand Seven Hundred Twenty Two and Fifty Five Paise Only 3722.55

65 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, etc., all complete as directed by Engineer-in-Charge. Granite stone slab colour black, Cherry/Ruby red & Area of slab over 0.50Sq m. 7.00 Sq m 4718.87 Rupees Four Thousand Seven Hundred Eighteen and Eighty Seven Paise Only 33032.09

66 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble / Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges, etc., all complete as directed by Engineer-in-Charge. 6.00 Nos 899.16 Rupees Eight Hundred Ninety Nine and Sixteen Paise Only 5394.96

WATER STORAGE TANK

67 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 500 Litres capacity, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, etc., all complete as directed by Engineer-in-Charge. 2000.00 Per Litre 10.11 Rupees Ten and Eleven Paise Only 20220.00

68 Providing and Fixing ball valve (brass) of approved quality, hign or low pressure with plastic floats of 15mm nominal bore, etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 373.78 Rupees Three Hundred Seventy Three and Seventy Eight Paise Only 1495.12

ELECTRICAL WORKS

69 Supply and fixing DP sheet metal enclosure on surface/recess along with 25A 240V C Curve DP MCB complete with connections, testing and commissioning etc as required 4.00 Nos. 1141.98 Rupees One Thousand One Hundred Forty One and Ninety Eight Paise Only 4567.92

70 Wiring for circuit /submain wiring along with earth wire with 2x2.5 sq mm +1 x 2.5 sq mm earth wire of FRLS PVC insulated single core copper conductor in surface/recess with medium class PVC conduit as required 71.25 Mts 268.64 Rupees Two Hundred Sixty Eight and Sixty Four Paise Only 19140.60

71 Wiring for light point/fan point/exhaust fan with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required 28.00 Pts 1433.08 Rupees One Thousand Four Hundred Thirty Three and Eight Paise Only 40126.24

72 Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as required 3.00 Nos. 360.47 Rupees Three Hundred Sixty and Forty Seven Paise Only 1081.41

73 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16A modular socket outlet with 15/16A modular switch , connections etc as required 4.00 Nos. 572.45 Rupees Five Hundred Seventy Two and Forty Five Paise Only 2289.80

74 Installation, testing and commissioning of prewired fluorescent fitting/compact fluorescent fitting of all types complete with all accessories and tube /lamp etc directly on ceiling/wall including connections with 1.5 sq mm FRLS PVC insulated copper conductor single core cable and earthing etc as required 16.00 Nos. 201.24 Rupees Two Hundred One and Twenty Four Paise Only 3219.84

75 Installation, testing and commissioning of ceiling fans including wiring the down rods of standard length up to 30 cm with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required 3.00 Nos. 208.08 Rupees Two Hundred Eight and Eight Paise Only 624.24

76 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing , commissioning etc as required upto 450 mm sweep 9.00 Nos. 439.60 Rupees Four Hundred Thirty Nine and Sixty Paise Only 3956.40

Sub-Total (Excluding GST) Rupees Seventeen Lakh Fifteen Thousand Seven Hundred Thirty and Fifty Four Paise Only 1715730.55

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 1715730.55 BELOW % 1715730.55

Add 18% GST Rupees Three Lakh Eight Thousand Eight Hundred Thirty One and Forty Nine Paise Only 308831.50

Grand Total (Including GST) Rupees Twenty Lakh Twenty Four Thousand Five Hundred Sixty Two and Four Paise Only 2024562.05

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/R-79/24-25

Name of Work: Renovation of Ladies Toilet located at Seat and Safety, Jaguar, Mirage Hangars and Establishment of Gents and Ladies Washroom at Senior Executive Canteen in Overhaul Division, HAL [BC] – [Including Electrical Works].

Estimated Amount in Rs.: 2020000

Tender Notice Date : 24.10.2024

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 4 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 606000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 808000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II