Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.4 LAccepted-AOC VILL DANNA PO TEH BASANTPUR DIST KATHUA JAMMU KASHMIR | BASANTPUR | KATHUA | JAMMU KASHMIR | L1 | Accepted-AOC lowest | |
| 2 | L2₹21.1 L+₹2.4 L (13.1%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹21.1 L+₹2.5 L (13.2%)Rejected-AOC | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹23.4 L+₹4.7 L (25.4%)Rejected-AOC | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹24.8 L+₹6.2 L (33.0%)Rejected-AOC | L5 | Rejected-AOC not found lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Basoli
GE Basoli PO lakhanpur Distt Kathua JK
CERTAIN REPAIR TO OTM AND MD ACCN IN POCKET B AT JANGLOT GRN UNDER GE BASOLI
2022_MES_530410_2
GE/BAS-34/2022-23
Open Tender
Civil Works
Item Rate
180 days
Janglot GRN under GE Basoli
Class E, category a (i)
7 documents required · 7 mandatory
₹500
GE Basoli
₹50,000
Yes
5 Jan 2023
6 Aug 2022
5 Sept 2022
6 Aug 2022
3 Sept 2022
20 Aug 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm, complete all as specified and as directed .
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and as directed .
Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm, complete all as specified and as directed .
S&F in repair PVC board 20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, and density should not less then 350 kg/sqm, complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed .
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with Particle Board supplying & fixing in frame at site as per specification & drawing.
M&L for factory made Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a),complete all as specified and as directed .
M&L Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated, complete all as specified and as directed .
M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm, complete all as specified and directed .
M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm, complete all as specified and directed .
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats, complete all as specified and as directed .
M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and as directed .
S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed .
S&F galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed .
S&F aluminium anodized doors standard JINDAL or equivalent section size 63.5 x 38 x 1.6mm for frame and section size 47.62 x 44.45 x 1.18mm for vertical style section size 46.72 x 44.45 x 1.4mm for top and central rail section size 95.25 x 44.45 x 1.16mm for bottom rail, section size 19 x 17.3 x 0.80mm for glazing clip for shutter including fabrication to required size and glazed with 5mm thick dark tinted glass including fitting etc including necessary jointing cleat aluminium glazing clips, rubber neoprene packing handles 2 Nos in each door hinges anodised aluminum snap beading screw, mortice lock heavy duty complete all as specified & directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)
S& F Aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg , complete all as specified and as directed .
S&F for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame with self drilling screws as per manufacturing instruction and complete as per specification and drawing.
S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed .
S&F Mild steel hinges medium weight cold rolled size 100mm, complete all as specified and directed .
S&F aluminium handle ,cast type, anodised ,150 mm size. complete all as specified and directed .
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long, complete all as specified and as directed.
M&L for painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint.complete all as specified and directed .
S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, wth hard drawn steel spring, fixed in floor, complete all as specified and directed .
S&F in repair Stainless Steel plate rack of size 900mm x 900mm x 250mm made with minimum 0.80mm thick sheet, complete all as specified and as directed. Make: Nirali/Blue Star/ Neelkamal
S&F in repairs 32mm dia flush pipe of polyethylene of low or high density or PVC , for wash hand basin / sink, complete all as specified and as directed
S&F in repair kitchen or labourator sink with plug washers,and waste pipe with drainage board made of stainless steel minimum 0.9 mm thick including bedding in CM (1:2) to drwaf wall or including fixing cantilever angle iron brackets embedded in PCC(1:1.5:3) and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. Make: Nirali/Blue Star/ Neelkamal
S&F in repairs 15 mm CP bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed .
S&F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and as directed .
S&F chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union, complete all as specified and as directed .
S&F in repairs chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking includinf making connections and fixed in position complete in all respect as specified Make : CERA/ Hindware/ Parryware
S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and as directed .
S&F steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor etc and taking up or down steel water tubing and connection complete all as specified and as directed .
S&F in repairs rotational moulded PVC water storage tank 1000 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-Icomplete all as specified and directed .
S&F in repair rotational moulded PVC water storage tank 500 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-I complete all as specified and directed .
S&F in repair Vitreous china boul urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia of pipe, complete all as specified and as directed . Make : Hindware / Jaquar/ Cera mark.
S&F in repair vitreous china urinal partition white of size 310 x , complete all as specified and as directed . Make : Hindware / Jaquar/ Cera mark.
S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and as directed . Make : Hindware / Jaquar/ Cera mark.
S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore, complete all as specified and as directed .
S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed .
S&F Curtain rod 20mm dia of ms powder coated with and including PVC brackets , Stops, rollers etc. complete all as specified and as directed .
S&F in repairs flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed .
S&F in repairs water closet squat pattern with vitreous china white Ist quality water closet Orissa pattern size 580x440 with integral foot rest and cast iron S trap complete all as specified and as directed .
S&F in repairs wash down water closet (Pedestal pattern) white with P or S trap including flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed .
S&F in repairs EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.
M & L for rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastered surfaces and applying one coat primer & two coats of distemper oil emulsion over 3mm thick wall putty complete all as specified and as directed .
M & L rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastred surfaces and applying two coats of cement base paint on walls over a coat of white wash, complete all as specified and directed .
M&L rendering 10 mm thick in CM 1:3, on ceiling, etc. finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc after preparation of new pastered surfaces of ceiling and applying three coats of white washing complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint including preparation of wood and wood based surfaces of any description exc 10cm width or girth complete all as specified and as directed .
M&L for applying one coat of synthetic enamel paint including preparation of steel and iron surfaces of any description exc 10cm width or girth complete all as specified and as directed .
M&L applying one coat of white wash including preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed .
M&L for preparation of old white washed surfaces of wall (plastered or unplastered) for white washing and applying one coat of white wash complete all as specified and as directed .
M&L preparation of old colour washed surfaces of wall (Plastered or unplastered) for colour washing and applying one coat of colour wash, complete all as specified and as directed ..
M&L preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint, complete all as specified and as directed .
M&L applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and as directed .
Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and as directed .
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm (TCT) of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed .
S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm (TCT) of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed .
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed .
S&F in repair PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats, complete all as specified and as directed .
S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges, complete all as specified and as directed .
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the ward "CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified.
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word" CLEANED ON WITH DATE' with while paint including replacement of broken/unserviceable fitting such as Elbow, Tee, socket, nipple of any size etc complete all as specified.
S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 15 mmm bore of pipe complete all as specified and as directed .
S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 20 mmm bore of pipe complete all as specified and as directed .
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed .
M&L for Pre-polished glazed designer heavy duty virtified tiles of size 300mmX300mmX 8 to 9mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortar finished cement concrete surface fair & Smooth without using extra cement complete all as specified and directed. Make :- Endura of Johnson, Durastone of somani or equivalent in Kajaria, Cera as approved by GE.
M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded agg) in plinth protection etc.laid in alternate bays all complete and as specified.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed .
S&F Figured glass 3mm thick , pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed .
Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor .Complete all as specified and directed ..
M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair without using extra cement complete all as specified and directed .
M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with two coat aluminium paint @ 0.20 Kg/sqm over APP membrane, rendering 15mm thick in CM 1:4 mixed with WPC at the rate of 3% by weight of cement over PCC Pading finished fair and even (WPC measured and paid seperately) . NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.
Supply only integral water proofing compound, complete all as specified and as directed .
M&L repairing steel windows by adjusting and welding the hinges all as specified and directed .
S&F in repairs steel handles left/right for steel windows 150mm size all as specified and directed .
S&F in repairs steel stays 300mm length for steel windows all as specified and directed .
Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all complete and as specified
M&L for reinforced cement concrete (1:2:4) type B-1,using 20 mm graded stone aggregate as in shelves etc including necessary form work, complete all as specified and as directed .
M&L for TMT Steel bars 8 mm dia cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and as directed .
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed .
M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed .
M&L rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including preparation of new plastred surfaces and applying three coat of white wash complete all as specified and directed .
M&L by Providing and fixing tiles false ceiling of size 600 x 600 mm incl of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm matel grid of hot dipped galvanised steel section (galvanised @ 120gms per sqm both side incl) consisting of 3600mm long main "T' of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell br 0.25mm thick.PPGI wall angle is fixed aling the perimeter of ceilings to walls, partition or columns etc with rawl plug and wooden screws at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size27 x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm, long dash fatners, 4mm GI wire spaced at max 1200mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runnner should not be greater than 600mm from adjecent wall than 1200mm long cross T is interlocked between the main T at 600mm center to center to form at grid 1200x600mm grid to form grids of 605mmx605mm. cross T at the ends having lenght more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x9mm thick tiles having light reflectors of >=75% are placed in the grid incl dismantling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation boards slabs blankets, any thickness. Make : M/s Everest, M/s Saint gobain, M/s Boral.
S&F in repairs One piece EWC S Concealed with Premium plastic seat Cover and twin Flush fittings, etc complete all as specified and directed .. Make :- CERA/PARRYWARE/HINDWARE
Taking down cement plaster/wall tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Glazed ceramic coloured tiles in vertical surfaces 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
S&F Vitrified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes, complete all as specified and directed .
Taking down cement plaster/tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Virified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
S&F Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes, complete all as specified and directed .
M&L Glazed ceramic coloured tiles 450x300x7mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in C.M (1: 4), complete all as specified and as directed.
M&L for machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed .
M&L for machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed .
Material and labour for providing wooden laminated flooring with bruce locking system having surface abrasion class AC-3 and density 920 Kg per Cum, of size 1215mm x 194mm x 8mm thick having fire rating class B1, fixed as in repair complete all as specified and directed. MAKE : ARMSTRONG/ VISTA / PERGO
M&L for 12mm thick Plywood, grade BWR,commercial, type BB, fixed with screws to timber frame work.
M&L for 0.90mm thick Decorative laminate type 1 sheet for surface finish, colour and pattern as approved by GE, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and as directed.
Supply and fix anodised aluminum Grill made of 6mm dia aluminum bars, size of mesh 50mm X 50mm fixed together with aluminum frame for window complete all as specified and directed
M&L for Providing and fixing 12mm thick Gypsum Board in ceiling, fixed with screw as per manufacturers instructions over and Including anodised aluminium snap grid frame work with grid size 605x605mm for false ceiling complete all as specified and as directed. NOTE:- The aluminium snap grid frame shall be as specified vide clause 10.38 of SSR part-I. Makr :- Armstrong, Gypsum India, Gyproc, Lloyds.
M&L for finishing walls with textured exterior paint of required shade by applying two coats of paint over and including priming coat of exterior primer, complete all as specified and as directed. Note:- The consumption of textured exterior paint shall be not less then @3.28 Ltr/10 Sqm and primer @ 2.20 Ltr/10Sqm or more as directed by manufacturer.
M&L for providing 12mm thick Toughned glass doors, automatic doors and similar work including stainless steel mortice lock of size 65 mm, 4 levers and stainless steel 2 nos handles of size 450 mm including cutting to desired shape, drilling holes etc, complete all as specified and directed. Note : The shape and design of glass shall be as approved by GE. The glass shall be shaped and drilled accordingly.
Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
M&L Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like fixed in cement mortar ( 1:4 ) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed or bedding layer of CM (1:4 ) for laying slab, complete all as specified and as directed.
M&L For 0.8 mm thick decorated vinyal pvc coated wall paper of approved design, water proof 3D Design printed including cutting as required and applying plastic adhesive chemical, complete all as specified and directed.,
S&F Non-skid matt finish joint free coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes,complete all as specified and directed.
M&L For 18-20mm Granite, black colour (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including 12mm thick cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including rendering 15mm thick Cement Mortar 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed.
M&L for gringing, rounding/moulding to edges of stone slabs, marble stone, granite stone slabs edges, such as in steps, cooding platform , and other similar situations etc. complete all as specified and as directed.
M&L Glazed ceramic coloured tiles glossay finish in wall cladding size of each tile 148x450X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in C.M 1: 4, complete all as specified and as directed.
S&F powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified.
Ms Dalip Kumar and Co.
SHUSHANT ASSOCIATES
M/S SWASTIKA BUILDERS
Standard engineers
KHOSLA ENGINEERS BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .