Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹51.6 L+₹4.0 L (8.33%)Rejected-Finance B 8 2ND FLOOR VIVEKANANDA SUPER MARKET HILL CART ROAD SILIGURI 734001 | SILIGURI | DARJEELING | WEST BENGAL | 734001 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹52.3 L+₹4.6 L (9.70%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹52.3 L+₹4.6 L (9.75%)Rejected-Finance VIVEKANANDA PALLY PO BAGDOGRA DIST DARJEELING PIN 734014 WB | DARJEELING | WEST BENGAL | 734014 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹52.9 L+₹5.3 L (11.0%)Rejected-Finance 10 UDAY SHANKAR SARANI SEVOKE ROAD SILIGURI DIST DARJEELING WB PIN 734 001 | JALPAIGURI | WEST BENGAL | 734001 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹46.5 L
EMD Value
₹93,080
Closing Date
20 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Bengdubi
Bengdubi Military Station PO-Bengdubi, Dist-Darjeeling, Pin 734424
SPECIAL REPAIR TO BLDG NO T 52 AND PROVN OF WASHING POINT WASHING SHED AND CERTAIN MINOR WORKS UNDER AGE B R II AGE E M OF GE BENGDUBI
2023_MES_620095_4
8496/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Bengdubii
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer
₹93,080
Yes
1 Mar 2024
6 Feb 2024
22 Feb 2024
6 Feb 2024
20 Feb 2024
13 Feb 2024
Amount
B/R Items Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, exc 1.5 m deep but not exceeding 3.0m depth and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches in soft/loose soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out. in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for Sand filling under floors or in foundation including watering and consolidated and compacted with clean dry sand complete all as specified and directed.
Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Removing excavated material (soil) exc 250m but n exc 500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
M&L for loose filling with aggregates broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.
M&L for hardcore of gauge n.exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.
M&L for cement concrete type D2, 1:4:8 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.
M&L for providing pain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in copping and filling in back of chowkat the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for Providing, cement concrete 1:2:4 type-B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
M&L for Providing precast ce- ment concrete type B1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match complete all as specified and directed.
M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate as in chajja , shelves and like etc. complete all as specified and directed.
M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for reinforced cement concrete design mix M 25 grade using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth using extra cement including forms moulds, mitred/stopped ends etc complete all as specified.
Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent)
M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Making good under cills or over arches, lintels and bressummers. including all pinning in cement mortar 1:4 when necessary complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical to rough finished surface complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished surface flat complete all as specified and directed.
M&L for formwork to chullah hoods, chajjas, troughs and similar items in cluding edges complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete, square, rectangular or polygonal in shape complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exc. 1.5 sqm each, including cutting holes for removing the hold fast,making good disturbed surfaces and removing materials from site of work complete all as specified and directed.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, including cutting holes for removing the hold fast, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.
Taking down old unserviceable shutters of any description exc 1.00 but n.exe 2.00 Sqm each and removing materials from the site of work complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatm moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain/decorative colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing. etc complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing complete all as specified Make : Rajshree/Sintex/H2O solution. Note:-The door frame to be fixed to wall using 8 x 100 mm long anchor fasteners.
S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd.
S&F 100 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified and directed.
S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixedcomplete all as specified and as directed.
S&F 150mm size aluminium handle cast type complete all as specified and directed.
S&F Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc of 25 mm bore complete all as specified and as directed
S&F tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as secified and as directed
M&L for MS framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11mm to 15mm complete all as specified and directed.
S&F Mild steel bolts.purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long & diameter of neck 12mm complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.
M&L for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running rails fixed with angle cleats or other connecting plates conforming to Fe 410 W (Gde E-250) quality-A including welded to rafter,purlin complete all as specified and directed.
M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment includng welding or riveting etc conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.
M&L for rolled mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-A. complete all as specified and directed.
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 conforming to Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
M&L for 1.25mm thick pressed steel door frame of size 165mm x 60mm with one or more rebates including necessary , hinges, lock strike plate, fixing lugs etc complete as specified.
S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.
S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 4 mm thick designed Non asbestos fiber cement building boards, fixed or laid /inserted to timber /GI /Aluminium frame-work with screws complete all as specified and directed.
M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
M&L for granite (of any type) stone slab 15 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over and including in 15mm thick cement mortar 1:6 beded, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection finished even and smooth using extra cement.Joints to be given at every 3m interval and corners of buildings and fitted with bituminious mastic or equivalent filler complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement.Joints to be given at every 3m interval and corners of buildings and fitted with bituminious mastic or equivalent filler complete all as specified and directed.
M&L for 100mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of hardstanding and ramp complete all as specified and directed.
M&L for 75mm thick PCC type C2,1:3:6 using 40mm graded stone aggregate as in sub base of PCC floor plinth protection complete all as specified and directed.
M&L for 75mm thick PCC type D2,1:4:8 using 40mm graded stone aggregate as in sub base of PCC floor complete all as specified and directed.
M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregates) as in PCC floor etc complete all as specified and directed.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregates) as in PCC floor etc complete all as specified and directed.
M&L for 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregates) as in flooring, finished the surface without using extra cement complete all as specified and directed.
Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M&L for preparation of new ceiling surface and distempering with 1st quality acrylic distemper (ready mixed) having Vol content less than 30gms/litre of approved manufacture of required shed or colour computs as per manufacture specification Two or More coats on new work over a coat of 1mm thick plaster of paris putty complete all as specified and directed.
M&L for sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete all as specified and directed.
S&F 5.50mm thick sheet glass of ordinary quality and glazing with oil putty or Silicon beading to aluminium frame or steel frame in squares exc 0.50 sqm in each pane complete all as specified and directed.
M&L for 4mm thick frosted Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.
M&L for one coats of synthetic enamel paint on old painted steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.
M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.
S&F tubes medium grade galvanised with all fittings laid in trenches of bore of tube 15 mm complete all as specified and directed.
S&F tubes medium grade galvanised with all fittings laid in trenches of bore of tube 20 mm complete all as specified and directed.
S&F tubes medium grade galvanised with all fittings laid in trenches of bore of tube 25 mm complete all as specified and directed.
S&F tubes medium grade galvanised with all fittings laid in trenches of bore of tube 50 mm complete all as specified and directed.
S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.
S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and directed.
Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed
Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed
Refixing of 15mm bore old GI tubing and connection in new or old positions walls and cilings or laid in floors including taking down complete all as specified and directed .
Refixing of 20mm bore old GI tubing and connection in new or old positions walls and cilings or laid in floors including taking down complete all as specified and directed .
Dismantling water tanks and removing to store exc 500 ltr but not exc 1000 ltr capacity complete all as specified and as directed
S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed.
S&F rotational moulded PVC water storage tank 1000 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed.
S&F stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.
S&F in repair fancy type stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.
S&F fancy type stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.
S&F fancy type stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.
S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and directed.
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and directed.
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 40 mm bore and fixed as in repair complete all as specified and directed.
S&F ball valves for 20mm bor dia of pipe high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
S&F in repair grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap, complete all as specified and directed.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.
S&F in repair PVC connections pipe ,15mm dia size with PTMT nuts of length 450mm complete all as specified and directed.
S & F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length fixed with cement joints fixed to wall complete all as specified and directed.
S&F 75mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repair 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trench complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends with rubber ring joints with ovel access door any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed.
S&F 75mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F 110mm bore PVC (SWR) `P' or 'S' trape complete all as specified and directed.
S&F PVC (SWR) floor trap 75mm dia , plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.
S&F Salt-glazed stoneware gully traps, square or round mouthed, 150x150mm type 'P' or 'S' type etc complete all as specified and directed.
S&F cutting into existing manholes for connecting new drains, making good to Internal dia of pipe 150mm in mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required etc complete all as specified and directed.
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.
M&L for plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides of bore pipes 150mm dia pipe after the pipe are laid and tested complete all as specified and directed.
M&L for SGSW pipes 150 mm dia grade 'A' laid in trenches and jointed complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.
Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness( below or above ground level) complete all as specified and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in framed section any position like trusses, rafters, purlins etc. complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings incl ridges, hips and valley gutter complete all as specified and directed.
Dismantling wall and ceiling board( fiber, pulp, insulation, etc.) or insulation board/slab/ blankets, any thickness, including cover fillets complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150mm dia complete all as specified and directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, partitions,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make onforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and particle board shall be measured and paid separately under respective items. (iii) The accessories required for partition as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid.
M&L for 25 mm thick type B-0,PCC 1:2:4 using 12.5 mm graded stone aggregate as in floor and finishing the surface even and rough for receiving floor finishes complete all as specified and directed.
M&L for 40 mm thick type B-0,PCC 1:2:4 using 12.5 mm graded stone aggregate as in floor and finishing the surface even and rough for receiving floor finishes complete all as specified and directed.
M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface etc complete all as specified and and as directed.
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match as in skirting/dado etc complete all as specified and directed.
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed.
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering layer 10 mm thick in cement mortar 1:3 etc complete all as specified and directed.
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and directed
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and directed
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed
M&L for pre polished coloured cement concrete chequred tile with grey cement and no pigment of approved quality size 300X300X 25mm thick on floors over and including 15 mm thick screed bed cement mortar 1:4 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete. complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separately under respective item of this schedule.
M&L for 15mm thick rendering on other than fair faces in cement mortar 1:4 finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying 2 coat of Birla/Asian wall care putty 3mm thick and two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed
M&L for preparation of new undecorated surface of wall and applying two coats of white wash over a coat of alkai primer complete all as specified and directed.
M&L for preparation of new undecorated surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparing newely plastered surface including Chalk whiting, on plastered surfaces,prepara-tory to distempering of wall and applying finishing walls with acrylic smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.
M&L for preparing of old existing treament and stopping of distempered and painted surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared surfaces complete all as specified and directed.
M&L for preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for newly plastered surface of wall and appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming primer including 02mm thick Birla/Asian wall care putty complete all as specified and as directed.
Cutting existing steel tubing bore of pipe 15mm for alterations or additions (Each cut measured), Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) done in position without taking down complete all as specified and directed.
Cutting existing steel tubing bore of pipe 20mm for alterations or additions (Each cut measured), Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) done in position without taking down complete all as specified and directed.
Supplying and laying of CPVC pipes outer diameter 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
Supplying and laying of CPVC pipes outer diameter 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.
S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.
S&F 15 mm bore pillar taps fancy type (long neck) cast copper alloy with hot & cold mixture chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and as directed.
S&F,Vitreous China wash down water closet pan (pedestal pattern) (excluding flushing cistern) including Pedestal pan and trap, and connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete and include seat cover etc all as specified and directed.
S&F Vitreous china urinal, half stall type, white (excluding flushing cistern ,flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing only automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.
S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed
S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 630mm x 450mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, complete all as specified and directed.
S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, complete all as specified and directed.
S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and as directed
S&F PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and as directed.
S&F Vitreous china WHB 550x400mm size white flat back with brackets incl cutting or pinning ends of brackets (including waste pipe) incl Waste coupling of PTMT (32 mm dia) (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gm complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed
Demolition of cement concrete (reinforced ) of any description and in any position not exceeding 15 cm thick, including removal complete all as specified and directed.
M&L for providing pain Cement Concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channel and drain complete all as specified and directed.
M&L for precast cement concrete louvers and jali type B0, 1:2:4(using 12.5mm graded stone aggregate) 35 mm thick( measured solid), including all moulding but excluding frame complete all as specified and directed. ( precast frame shall be measured seperately.
S&F 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed.
E/M Items M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 10Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed.
M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed.
M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 50sqmm 3.5 core laid in trench/pole/on wall completer all as specified and as directed.
M&L for sand cushioning for protection of underground cable, consolidated and compacted with clean dry sand complete all as specified and directed.
M&L well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.
M&L for 40mm dia GI pipe Light grade with all necessary fittings laid in trenches, fixed to wall/pole/under road/floor etc for cable protection complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as per existing specification complete all as specified and directed.
M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed for the followings: -
One light point/ Bell/ one fan point controlled by one switch
One 3 pin socket outlet, 6 Amp on the same board with other switches
One 3 pin socket outlet, 6 Amp independent
M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed.
M&L for concealed point wiring independent with FRLSH PVC insulated unsheathed multistranded copper conduct or cables 1100 Volts grade of 4.0 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 4.0 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed.
S&F Switch piano, flush type single pole, one way 6 Amp complete all as per specified and directed.
S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as per specified and directed.
S&F Sheet metal enclosure for MCB DB double door powder coated single pole & Neutral 4 way with 200Amp rated common bus bar at incomming complete all as specified and directed.
S&F Sheet metal enclosure for MCB DB double door powder coated single pole & Neutral 8 way with common bus bar at incomming complete all as specified and directed.Make:- Legrand/havells/L&T/ABB.
S&F Sheet metal enclosure for MCB DB double door triple pole & Neutral 4 way with common bus bar at incomming complete all as specified and directed.Make:- Legrand/havells/L&T/ABB.
S&F Ceiling rose, 3 way PVC insulated body complete all as per specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. ( complete all as specified and directed.
Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as specified and directed.
S&F Exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and wire mesh with aluminium based frame (as approved by GE) including antidust painting complete including making a holes in wall as required size, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed.
S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including cutting of wall complete all as specified and directed.
S&F MCB 'C' series Single pole and neutral 6 to 32Amps, breaking capacity 10KA complete all as specified and directed.
S&F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.
S&F Building security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamps made out of MS flat of size 25X3 mm , 4 Nos Anchor Bolt of suitable size etc complete all as specified and directed. Make:-Havells/philips/cromptons.
Taking down of Old MCB DB / control box/ main switches etc any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.
S&F GI bracket for flood light made out of angle iron 50x50x5mm grade 1.2 mtr length at site as required complete with set of MS flat iron clamp of MS flat 50x6mm thick etc complete all as directed and specified including dismantling old one.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10/9 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F Switch socket 3 pin, 6 Amp flush type universal complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed.
S&F street light bracket made out of 25 mm bore GI light grade 1.00 m long to required shape as in bracket for street light fittings fixed with two pair to MS flate iron clamp of size 50mm x 6mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.
S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed.
S&F MCB Four pole (TPN), 415 volts, 40-63 Amps, breaking capacity 10KA complete all as specified and directed.
M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit medium grade 20mm complete all as specified and directed. Note: For concealed sub-main wiring cutting chases will be included in same rate)
M&L for earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanised lead lead wire 4.0 mm dia by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth strip protected by 40 mm medium grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion all as shown on electrical plate No.5 of SSR Part-I. including taking out unserviceable one and necessary earthwork complete all as specified and directed.
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs.31,817.00 (refer Tender Srl Page No 38). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
TECHNOSOFT
M/S UTTAM ENTERPRISES
T K GANGULY
Paritosh Saha
MUKHERJEE ENTERPRISE
MILAN GHOSH
M/S G D CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .