GE(S) BTD TOKEN NO 69 OF 2022-23 REPAIR TO PATH FENCING IN OTM IN THE AREA AGE BR II UNDER GE (S) BATHINDA AT BATHINDA MIL STN

Amount

Dismantling of RCC post or struts carefuly of any section embeded in natural ground incl taking out embeded portion and making good disturbed ground complete all as specified and directed

Dismantling fencing wire mesh, any description complete all as specified and directed

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

Excavating in post holes each not exc 0.5 Cum in soft/loose of soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface complete all as specified and directed

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundation of posts and struts complete all as specified and directed

Fixing only Mild steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reveting etc., confirming to Fe290 gde E-165 complete all as specified and directed

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reveting etc., confirming to Fe290 gde E-165 complete all as specified and directed

Supply only chain link MS galvanised fencing, fixing to steel fencing post straining bolts etc complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire etc complete all as specified and directed

MS TMT round bar 10 mm dia (Except steel wires) as in line wires for chain link fencing, grade confirming to Fe-290 (Gde-E-165) complete all as specified and directed

MS TMT round bar 10 mm dia as in line wires for chain link fencing, grade confirming to Fe-290 (Gde-E-165) complete all as specified and directed

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and on hexagonal or square nut, length of bolt exceeding 30 cm long diameter of neck 12 mm complete all as specified and directed

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, incl, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed

M&L painting with synthetic enamel paint two coats including redoxide and preparing the new steel surfaces of any description over 10cm in width or girth complete all as specified and directed

M & L for Providing precast cement concrete louvres and jallies set in CM 1:4 ,type B-0, 1:2:4 (12.5mm graded aggregate), 25mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately) complete all as specified and directed

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and directed

M&L 25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed

Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment (Except tiles) confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed

M & L for Providing and laying at or near ground level factory made kerb stone of 1:½:3 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

S&F Vitrified paver tiles 10 mm thick (square/ rectangular), area of each tiles not exceeding 0.09 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including the provision of 15 mm thick bedding layer in cm 1:6 complete all as specified and directed

Preparation of old concrete or brick surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint, colour on these surfaces complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:6) using old size bricks complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed

Demolition of brick works or stone boulder masonary built in cement mortar complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished fair and even. complete all as specified and directed

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a priming coat complete all as specified and directed

Providing, cement concrete as in coping type B1, 1:2:4 (20mm graded agg) complete all as specified and directed

M & L for cement concrete moulded posts of size 75x75mm with top cement concrete round moulded for inserting between cement concrete jallies/louvers set in cement mortar1:4 complete all as specified and directed

M & L preparation of new plastered surfaces/ concrete jallies/posts and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels plates etc including welding, grinding, buffing, polising and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with nexessary accessories & stainless steel dash fasteners, stainless steel bolts etc of recuired size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders

M/s Balvinder Singh Engineer and Contractors

V K CONTRACTOR

FAQIR CHAND

M/s PANKAJ KUMAR

M/s Kamal Constructions

Aman Enterprises

RAMA AUTOS