GENP-37/2020-21 REPAIR/ REPLACEMENT OF ELECTRIC WIRING INCLUDING ALL ELECTRIC FITTINGS, FIXTURE AT ROCK VIEW, HILL VIEW, SPORTS VIEW AND OFFICERS MESS AT AIR FORCE STN PALAM

Amount

Taking down carefully unserviceable Aluminium point wiring (light, fan socket or power)complete with fitting such as switches, ceiling rose lamp holder, regulators, sockets, F/Tube/Sketch light fittings, wooden terminal box plastic laminated sheet cover, from T.W batten including T.W batten or PVC conduits including taking down of DB’s, meter board any type all as specified and as directed

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M & L for Point wiring for one light point controlled by one switch one way with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modullar plate for mounting switches, sockets, fan regulators, etc and earth wire singlle core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly complete all as spd and directed by Engr- in- Charge.

All as per ser item 3 above but one fan/exhaust fan point controlled by one switch.

All as per ser item 3 above but one socket outlet 5 Amp controlled by one switch on independent board

All as per ser item 3 above but one 3 pin 5Amps socket out let point on the same board controlled by one switch complete

All as per ser item 3 above but one bell point controled by one bell push 5 Amps

All as per ser item 3 above but one light point controlled by two 2 - ways switches with cables 1.5 sq. MM

All as per Srl item No 3 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 1.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

All as per Srl item No 9 above but one power point 6 pin 15 Amps socket out let with 4.0 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.

S&F modular switch 1 way 6 Amps one module complete all as specified and directed by Engr-in-Charge.

S&F modular switch 2 way, 6 Amps one module complete all as specified and directed by Engr-in-Charge.

Supply and fixing modular socket 6 Amps 2/3 Pin combined 02 module complete, all as specified and directed by Engr-in-Charge.

S&F modular switch one way 16 Amps, one module complete, all as specified and as directed by Engr-in-Charge.

S & F socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge.

Supply and fixing electric bell, multi music type, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/Havells.

Supply and fixing modular bell push 6 Amps one module complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified and as directed by Engr-in-Charge.

Supply and fixing of switch piano flush type 5 Amps, single pole one way complete, all as specified and directed by Engr-in-Charge.

Supply and fixing socket out let 3 pin 5 Amps, flush type complete, all as specified and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way15 Amps complete, all as specified and as directed by Engr-in-Charge.

Supply and fixing of socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and as directed by Engr-in-Charge.

Supply and fixing flush type bell push, 5 Amps complete all as specified and as directed by Engr-in-Charge. Make : Anchor/Cona/SSK.

S&F Indoor LED battens- wall mounted/surface integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt with all accessories internally pre wired and including connecting up with twin core wire complete all as specified and directed by Engr-in-Charge. Make wipro/ Philips/GE.

S&F LED tube rod 20 watt 4 feet white with minimum lumens 2200, pf >0.90, THD < 20 complete all as specified and directed by Engr-in-Charge. Make Wipro/ Philips/GE.

S&F Indoor LED battens- wall mounted/surface integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt with all accessories internally pre wired and including connecting up with twin core wire with minimum lumens 1050, pf >0.90, THD < 20 complete all as specified and directed by Engr-in-Charge. Make Havells/ Philips/GE.

Supply and fixing of LED bulb 9 watt in replacement of CFL 11/15 watt fixed in pendent holder /bulk head complete all as specified and directed. Make - Havells/Philips/GE

S&F wall bracket mounted decorative light, powder coated housing with milky glass suitable for fixture in PC/PMMA material wired with B-22d lamp holder and suitable for 15W LED (Spiral B-22 base) including one No 15 watt LED. Make- Havells/Philips/Wipro

Supply and fixing in replacement of milky white globe Garden light with 4 feet long GI pipe 40mm dia including PCC block of 12"x12"x18" size for fixing of GI pipe with 15W LED bulb complete with all accessories internally pre wired and including connecting up twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make - Havells/Philips/Wipro

S&F for Indoor decorative LED surface down light 12 Watt complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable with lumens 1000, pf≥0.95, THD≤10 complete all as spd and directed by Engr-in-Charge Make: Make - Havells/Philips/Wipro.

S&F in replacement of decorative LED bollards light fittings 6W/8W 4 feet with opal diffuser and aluminium reflector white fixture with extruded aluminium body, with all accessories internally pre wired and including connecting up with twin core copper conductor cable, with lumens 400, pf≥0.95, THD≤15. Make: Havells/Philips/Wipro.

Supply and fixing in replacement of new generation , post top , energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution , spun aluminium landscape luminaire with LEDs as light source >15W complete with all accessories internally pre wired and including connecting up twin core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make : Havells/Philips/GE.

Supply and fixing for sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make: Havells/CG/Standard/Leagrand.

Supply and fixing for sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. Make: Havells/CG/Standard/Leagrand.

Supply and fixing for sheet metal enclosure for distribution board SPN (when MCBs to be used ) 4 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge

Supply and fixing for vertical type load line distribution board, double door ,12 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand Cat Pt 5077 48 or equivalent in Havelles/L&T.

Supply and fixing for vertical type load line distribution board, double door , 8 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand Cat Pt 5077 47 or equivalent in Havelles/L&T.

Supply and fixing for vertical type load line distribution board, double door , 4 way , IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed by Engr-in-Charge. Make : Legrand Cat Pt 5077 46 or equivalent in Havelles/L&T.

Supply and fixing for MCB, SPN, 63A ,10KA. Make : Legrand cat part No 4086 20 or equivalent in Havelles/C&S .

Supply and fixing for MCB, SPN, 40A ,10KA.Make : Legrand cat part No 4086 18 or equivalent in Havelles/C&S .

Supply and fixing for MCB, SP, 6-32A ,10KA.Make : Legrand cat part No 4085 87 or equivalent in Havelles/C&S .

Supply and fixing for MCB, SP 40 Amp ,10KA.Make : Legrand cat part No 4085 96 or equivalent in Havelles/C&S .

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps complete all as spd and directed by Engr-in-Charge .

M&L for sub main wiring with 2 run of 10 sq mm and one run of 6 sq mm of single core PVC insulated but unsheathed FRLS cable of multistranded copper conductor 1100 V grade IS-694 drawing into and including rigid non metallic PVC conduit, medium grade ISI marked ( not less than 20 mm) with all conduit fittings & fixing accessories for concealed in wall/ ceiling or surface incl the specified run of specified size earth continuity conductor of similar type of cable complete all as spd and directed by Engr-in- Charge. Note- The undermentioned runs of single core cable and specified earth continuity conductor and relevant conduit with fitting acessories will be measured as one run

All as per sl item No 45 but 2 run of 6 sq mm and one run of 6 sq mm

All as per sl item No 45 but 2 run of 4 sqmm and one run of 4 sqmm

All as per sl item No 45 but 2 run of 2.5 sqmm and one run of 2.5 sqmm

M&L in replacement of PVC insulated service cable flat or round sheathed, aluminium, multistranded conductor 1100V grade size 16 Sq mm 2 core complete all as specified and directed by Engr-in-Charge.

M&L in replacement of PVC insulated service cable flat or round sheathed, aluminium, multistranded conductor 1100V grade size 10 Sq mm 2 core complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

M&L for earthing complete for bldg with copper earth plate electrode 60cm x 60cm x 3.15mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to copper earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

M&L in replacement of copper strip 20x3mm thick as earthing lead connection complete all as specified and directed.

Supply and fix in replacement of LED bldg light 45 watt IP 66 with lensed optics internally prewired incl electronic driver and connecting up with three core flexible copper condutor 1.5 sqmm cable with lumens 4600, pf >0.95, TSD < 10 complete all as specified and directed. Make : Havells/Philips/GE.

M&L in replacement of replacement GI pipe light grade 40mm dia bracket not less than 1.5 Mtr long and bent to a shape for fixing of street lights incl 02 Nos MS clamps made out out of 25x6 mm MS flat incl 04 Nos fully threaded bolts and nuts fixing on wall etc complete all as spd and directed by Engr-in-Charge .

Taking out old unserviceable LT under ground cable any type from trenches,pipes & poles complete all as specified.

Supply and laying for 16 sqmm 4 core, LT, XLPE insulated under ground 1100 volt grade cable with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and directed by Engr-In-Charge.

All as per srl item No. 57 here-In-before but 25 sqmm 4 core.

All as per srl item No. 57 here-In-before but 35 sqmm 3.5 core.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtr wide and not exc. 1.5 Mtrs deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed by Engr-in-Charge.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid and tested complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge

M&L for sand cushioning to under ground cable provided with a layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm complete all as specified and directed by Engr-In-Charge.

M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ bricks laid dry flat complete all as specified.

All as per srl item No 64 here-in-before but except but brickes (brickes retrived from srl item no 55 of Sch A)

Microsys Controls India

JAIPAL AND BROTHERS

PARKASH ENTERPRISES

Vishal Enterprises