Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Accepted |
| 2 | Accepted-Technical | Accepted-Technical Accepted |
| 3 | Accepted-Technical | Accepted-Technical Accepted |
Tender Value
₹1.5 L
EMD Value
₹3,060
Closing Date
31 Aug 2026, 2:00 pmClosed
Executive Engineer
Executive Engineer M and H Division Anantnag
Relocation of the existing Boiler Unit System (Central Heating System) Installed at VIP Hut (Bobby Hut) at Pahalgam
2026_PWDJK_320360_1
MHDA/TS/2026-27/42
Open Tender
Miscellaneous Works
Percentage
10 days
Pahalgam
Refer Nit
5 documents required · 5 mandatory
₹200
Accounts Officer M and H Engg. Deptt. Kashmir
₹3,060
1 Sept 2026
10 Aug 2026
1 Sept 2026
10 Aug 2026
31 Aug 2026
10 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of the Existing Hot Water Generator: The scope of work involves the dismantling of the existing Hot Water Generator with a capacity of 60,000 Kcal/hr. The job includes the dismantling of the Hot water generator, chimney, burner, and hot water pump. The job also includes dismantling associated PPR piping, valves, and other accessories in accordance with site requirements. Refixing/Installation, testing and commissioning of the existing Hot Water Generator: The process includes the refitting and installation of the existing unit at the new location which comprises the reinstallation of the Hot Water Generator, chimney, burner, and hot water pump. Furthermore, it involves re-connection of all water, electrical, and fuel lines, and ensuring the secure placement of the unit on its foundation along with all necessary accessories, in compliance with site specifications 60000 Kcal/Hr capacity. | 1 | Job | 35,000 | ₹35,000 |
| 2 | Providing and Fitting of self-supporting chimney for exhaustion of the combustion gases. The chimney shall be about 6 mtrs high, fabricated out of 3mm thick Mild steel sheet rolled into a round tube of required 150mm diameter. | 1 | Job | 7,100 | ₹7,100 |
| 3Providing and fitting of heavy duty new PPR composite hot water piping having fiber glass reinforcement which includes required fittings like tees, albows, bends, junctions, unions etc. Clamps structural supports as required/ directed at site. PPR Piping | |||||
| 3.01 | 50 mm dia. | 15 | Rmt | 1,098 | ₹16,470 |
| 3.02 | 40 mm dia | 20 | Rmt | 956 | ₹19,120 |
| 3.03 | 32 mm dia | 20 | Rmt | 821 | ₹16,420 |
| 4Providing and fitting of forged brass Ball vales with adaptors of following Dia as per site requirement. | |||||
| 4.01 | 50 mm dia | 2 | No | 3,280 | ₹6,560 |
| 4.02 | 40mm dia | 4 | Nos | 2,879 | ₹11,516 |
| 4.03 | 32 mm dia | 4 | Nos | 2,360 | ₹9,440 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_1064735.xls
BOQ • 0.27 MB
corrigendumcorrection.pdf
PDF • 0.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .