Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.3 LAccepted-AOC BOOTH NO 56 MAIN MARKET SECTOR 40 C CHANDIGARH U T 160036 | CHANDIGARH | CHANDIGARH | CHANDIGARH | 160036 | 1 | Accepted-AOC Acceptance Of Tender | |
| 2 | 2₹9.8 L+₹26,610 (2.80%)Rejected-Finance | 2 | Rejected-Finance Not L1 |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
3 Sept 2024, 10:00 amClosed
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, LucknowCantt, Lucknow-226002
PROVN OF COLD STORAGE AT COMMD OFFRS MESS COOK HOUSE BLDG NO P-9 UNDER GE (EAST) LUCKNOW
2024_MES_663105_1
CWE/LKO/E/T-32 OF 2024-2025
Open Tender
Miscellaneous Works
Item Rate
180 days
LUCKNOW
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (EAST) LUCKNOW
₹19,000
Yes
30 Sept 2024
29 Jun 2024
10 Sept 2024
29 Jun 2024
3 Sept 2024
13 Jul 2024
29 Jun 2024 - 13 Jul 2024
Amount
Supply and fixing of Walking in Chiller of size (104''x81''x96'') inch, PUF thickness 60 mm, Panels GI Sheet thickness 0.4mm and PUF thickness 60 mm,PUF Panels CFC&HCFC Free Cyclopentane PPGI OUTSIDE AND 304SS INSIDE OF DENSITY 40 kg/m^3+/- 2Kg/m^3 incl lock arrangement of Cam-lock with metal plunger with floor of 100 mm thick PUF Panels PP OUTER,INSIDE 6 mm marine ply with 1.2mm AL Chaqured Plate,Door type of PPGI Outside/304 SS inside of size 34x78" clear manual opening with one no of doors(swing type door) incl strip curtain all as specified and directed by Eng-in-Charge.
Supply,install,commissioning and testing of Walking in Chiller(Evaporating unit indoor) 1 Nos unit as working of desired temperature 2degree C to 4 deg C, incl inner grooved copper tubes for superior heat transfer and defrost heaters with in the coil to ensure total defrost with 2 Nos of fan of Nominal capacity Refrigeration 10000 BTU and airflow 1600CFM, Airthrow 12 feet, 1 No of circuit and digital control panel and condensing unit (outdoor) 1 Nos unit as working, powder coated body for UV and corrosion resistant, incl inner grooved copper tubes and slit aluminium fins for superior heat transfer, pre charged unit with service valves, weather-proof polyster powder coated Canopy and powder coated body for UV and corrosion resistant feet with air cooled high ambient designed hermetic compressor, ecofriendally working on 230V,Single phase supply 50 Hz and power consumtion of 1.9KVA Unit each unit, 404 refrigerant with digital control panel all as specified and directed by Eng-in-Charge.(Note:- Any Extra length of Copper pipe and drain pipe req is deemed to be incl in the item rate and no extra payment will be done to the contractor.)
Supply and fixing air strip curtain of size 42'' x 78'' with 304SS hooks for hanging curtain all as specified and directed.
Supply,install,commissioning and testing of commercial air curtain unit for door size of 4feet X 6.6 feet for prevention of dust and conditioned air losses, Single/three phase 230/440V,50hz ,made out of MS/CRCA sheet of minium thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven blaked) with MS-CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single electric motor,nozzle etc,complete with fittings and accesories so as to produce 1-1.5 m/sec air velocity at floor level for door opening all as specified and directed by Eng-in-Charge.
Supply,install,commissioning and testing of racks for chiller unit of size (30"x15"x72") made of 304 SS, 25mmsquare holo pipe 304SS WITH 18 g 304 SS Sheet self (4 No shelf) as per user rquirement all as specified and directed by Eng-in-Charge.
Supply,install,commissioning and testing of racks for freezer and chiller unit of size (51"x15"x72") made of 304 SS, 25mm square holo pipe 304SS WITH 18 g 304 SS Sheet self (4 No shelf) as per user rquirement all as specified and directed by Eng-in-Charge.
Supply and fixing single pole & neutral sheet metal enclosure with a two pin earth plug & socket complete with one single pole MCB 32 Amps complete all as specified and and directed by the Engineer-in-Charge.
Supply and fixing Voltage stabilizer of capacity 4KVA working range lower voltage 90V- and upper voltage 300V, 100% copper winding with time delay of Max 3 Min all as specified and directed.
Taking down U/S burned wire and M & L for Sub Main wiring with under mentioned runs of S/C PVC insulated but unsheathed FRLS cable of specified size with multi stranded copper conductor 1100 volt grade IS-694 marked drawn through and including non metallic PVC conduit pipe medium grade ISI marked along with fittings and accessories all fixed on surface of wall in conduit and also including the specified runs of specified size earth continuity conductor of similar type of cable complete all as specified and directed (the under mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one length). (a) 2 run of 10.0 Sqmm cable and 1 run of 10.0 sqmm cable connected to common earth dolly
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc.but excluding ashlar facings and precast concrete articles complete all as specified and directed
S & F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified.
S & F for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed.
M & L for prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
Demolition of cement Concrete in ground floors and pavings n'exe 15 cm thickness (below or above ground level) complete all as specified and directed.
M & L, 40mm thick cement concrete 1:2:4 type B-1using 20mm graded aggregate as in floors, surface finished even & smooth using extra cement complete all as specified and directed.
M & L for brick work using old size fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete, all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4, finished surface even and fair with out using extra cement and using WPC @ 3%, complete all as specified and directed.
M&L rendering 15mm thick on fair faces of brick work in CM (1:6) surface finished even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of oil emulsion distemper of approved shade/tint over a coat of primer complete all as specified and as directed.
M&L for preparation of newly wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls, complete all as specified and directed.
M & L for 1mm thick wall care putty on wall / ceiling on old plastered surfaces including prepration complete all as specified and directed.
SHYAM AND SONS ENTERPRISES (BID ID -3069153)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .