Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.1 LAccepted-AOC NOT AVAILABLE | ₹46.1 L Quoted ₹47.5 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹57.2 LRejected-Finance | ₹57.2 L | L2 | Rejected-Finance BEING OTHER THAN LOWEST |
| 3 | L3₹57.7 LRejected-Finance A 14 USHA SADAN NEAR POST OFFICE COLABA MUMBAI 05 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | ₹57.7 L | L3 | Rejected-Finance BEING OTHER THAN LOWEST |
| 4 | L4₹62.4 LRejected-Finance 1 14 SUJAL MANSION B BLOCK BHANGWADI KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | ₹62.4 L | L4 | Rejected-Finance BEING OTHER THAN LOWEST |
| 5 | L5₹63.0 LRejected-Finance BLOCK C 14 GROUND FLOOR PLOT 618 624 BHIVANDIWALA TERRACE JAGANNATH SHANKARSHETH MARG DHOBI TALAO NEAR KALBADEVI POST OFFICE MUMBAI 400002 | MUMBAI | MAHARASHTRA | 400002 | ₹63.0 L | L5 | Rejected-Finance BEING OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | S S ENTERPRISES L3 | Chakshu Enterprise L4 | NOEL ENGINEERS L7 | AGRAWAL ASSOCIATES L5 | B P ENTERPRISES L6 | shubham construction L2 | SHREE JAGDISH FURNITURE CO. L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down unserviceable FTL/batten fittings with supply and fix LED batten fitting 20 Watt, 240V, 4ft CDL/NW comprises of extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm or suspension wire of 1.5 mtr is included (02 nos) for hanging with ceiling surfaces by fastener bolt as per site requirement for mounting light fittings and as specified and directed by Engr-in-Charge. | 182 | Each | 300 ₹54,600 | 200 ₹36,400 | 150 ₹27,300 | 200 ₹36,400 | 200 ₹36,400 | 200 ₹36,400 | 247 ₹44,954 |
| 2.00 | S&F 10W LED batten with inbuilt smart motion sensor, 230 Volt , 50 Hz , 2 feet, polycarbonate extruted channel, powder coated with diffuser for glare free light, Inbuilt motion sensor prewired with 25% dimmer illuminous in ideal time with all accessories including two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose complete with following specification. (i) housing-polycarbonate extrusion,diffuser- opal- polymer, LED type- MID power ,Light distribition- general Spread, LED efficiency - > 130 lumen/Watt, System effieciency- > 100 lumen/Watt, Driver efficiency - more than 85%, power factor- more than 0.95, THD - <10%, Mounting/Fixing- Wall/Ceiling, Ingress Protection - IP-20, Sensor type- HF inbuilt integral occupancy/movement sensor, sensor range- upto 5 mtrs(cone formation ), Dimming operation- default operation at 25% of the is rated value. On detection of motion, light output rises to 100% for upto 20 sec . in absence of otion switches back to default operation, LED life- upto 30,000 Hrs.Surge Protection- not less than 1KV. | 120 | Each | 550 ₹66,000 | 1,200 ₹1.4 L | 350 ₹42,000 | 700 ₹84,000 | 600 ₹72,000 | 300 ₹36,000 | 647 ₹77,640 |
| 3.00 | Taking down old existing unserviceable recessed mounting/hanging light fittings and Supply and fix 1' x 4' LED luminaires CRCA housing, white powder coated, with polymer diffuser complete with all accessories suitable for recessed mounting 36 Watt, 240V, CDL/NW. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings or suspension wire of 1.5 mtr is included (02 nos) for hanging with ceiling surfaces by fastener bolt as per site requirement and as specified and directed by Engr-in-Charge. | 309 | Each | 2,400 ₹7.4 L | 650 ₹2.0 L | 3,600 ₹11.1 L | 2,000 ₹6.2 L | 2,650 ₹8.2 L | 2,000 ₹6.2 L | 2,700 ₹8.3 L |
| 4.00 | Taking down old unserviceable ceiling fan of any size/Make and deposite to MES store, Supply and fixing of ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified. | 250 | Each | 2,200 ₹5.5 L | 3,200 ₹8 L | 2,650 ₹6.6 L | 3,400 ₹8.5 L | 2,500 ₹6.3 L | 2,550 ₹6.4 L | 2,222 ₹5.6 L |
| 5.00 | Taking down deterioted louvers and supply and fix new louvers, fixed type made out of 1.6 mm GI sheet with horizontal ventilation, bending into shape of size 45cmx45cm(outer) with 20x3mm flat iron base of size 45cmx45cm complete by providing of fixing arrangement for louvers upto 5th floor of including rate all as specified and directed by Engr-in-Charge. | 36 | Each | 400 ₹14,400 | 472 ₹16,992 | 650 ₹23,400 | 750 ₹27,000 | 600 ₹21,600 | 1,200 ₹43,200 | 647 ₹23,292 |
| 6.00 | S&F in replacement with new cable PVC insulated three core over all PVC sheathed 2.5 Sqmm stranded copper conductor flexible cable for connecion from DB to connector junction box for power supply to security light fittings drawn in PVC cashing capping or PVC conduit not less than 20mm as required at site and as directed by Engineer-in-Charge including taking out old one. Note - Quoted rate included for PVC cashing cappping / PVC conduit pipe (Medium grade) with fixing accessories like Band, clamp, junction etc. 3 core cable shall be measure as a single unit. | 1,000 | RM | 100 ₹1 L | 120 ₹1.2 L | 150 ₹1.5 L | 190 ₹1.9 L | 100 ₹1 L | 155 ₹1.6 L | 247 ₹2.5 L |
| 7.00 | S & F in repair junction box of size not less than 4x4 inch with connector encloser, 3 terminal/ PVC/ polycarbonate, isolated body including taking out old one. | 20 | Each | 400 ₹8,000 | 295 ₹5,900 | 255 ₹5,100 | 50 ₹1,000 | 50 ₹1,000 | 250 ₹5,000 | 77 ₹1,540 |
| 8.00 | S&F building security light bracket bend to shape made as required of 25/32mm dia, GI pipe light grade fixed to pole/ Wall including M&L for fixing with the help of flat iron clamp with the help of nuts and bolts for fixing of building security light fitting on the wall complete after taking out old U/S one all as specified and as directed. | 20 | Each | 400 ₹8,000 | 200 ₹4,000 | 210 ₹4,200 | 700 ₹14,000 | 120 ₹2,400 | 1,000 ₹20,000 | 1,400 ₹28,000 |
| 9.00 | Taking out Old, U/s one Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Note :- GI bracket shall be measured and paid seperately. | 20 | Each | 3,500 ₹70,000 | 1,200 ₹24,000 | 1,750 ₹35,000 | 1,350 ₹27,000 | 1,800 ₹36,000 | 2,100 ₹42,000 | 3,700 ₹74,000 |
| 10.00 | S & F in replacement with Analog Timelite distribution board 16A, 3 pole, 230 Volt with contactor, relay and prewired with Analog time switch 3P Module, 24 hours program, programmable every 15 min., backup of 100 hours, current capacity 16A for ON/OFF controlling of security lights and including taking out old unserviceable complete all as specified and directed | 2 | Each | 10,000 ₹20,000 | 1,121 ₹2,242 | 2,100 ₹4,200 | 26,000 ₹52,000 | 5,000 ₹10,000 | 4,000 ₹8,000 | 17,000 ₹34,000 |
Updated dates
Tender Value
₹68 L
EMD Value
₹1.4 L
Closing Date
24 Mar 2026, 6:00 pmClosed
GE (NW) NAVY NAGAR, COLABA, MUMBAI
GE (NW) NAVY NAGAR, COLABA, MUMBAI, DR HOMI BHABHA ROAD COLABA, MUMBAI-400005
SPECIAL REPAIRS/ REPLACEMENT OF VINTAGE LIGHT FITTINGS, CEILING FANS, LED LIGHT FITTING IN CLASSROOMS, LABS AND LIBRARY AND OTHER ALLIED WORKS IN PRIMARY AND SECONDARY WING AT NCS MUMBAI UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI
2026_MES_754087_1
8624/E8
Open Tender
Electrical and Maintenance Works
180 days
GE (NW) NAVY NAGAR, COLABA
Class D and Category b(i)
8 documents required · 8 mandatory
₹500
GE (NW) NAVY NAGAR
₹1.4 L
31 Mar 2026
24 Feb 2026
26 Mar 2026
24 Feb 2026
24 Mar 2026
17 Mar 2026
24 Feb 2026 - 24 Mar 2026
Taking down unserviceable FTL/batten fittings with supply and fix LED batten fitting 20 Watt, 240V, 4ft CDL/NW comprises of extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm or suspension wire of 1.5 mtr is included (02 nos) for hanging with ceiling surfaces by fastener bolt as per site requirement for mounting light fittings and as specified and directed by Engr-in-Charge.
S&F 10W LED batten with inbuilt smart motion sensor, 230 Volt , 50 Hz , 2 feet, polycarbonate extruted channel, powder coated with diffuser for glare free light, Inbuilt motion sensor prewired with 25% dimmer illuminous in ideal time with all accessories including two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose complete with following specification. (i) housing-polycarbonate extrusion,diffuser- opal- polymer, LED type- MID power ,Light distribition- general Spread, LED efficiency - > 130 lumen/Watt, System effieciency- > 100 lumen/Watt, Driver efficiency - more than 85%, power factor- more than 0.95, THD - <10%, Mounting/Fixing- Wall/Ceiling, Ingress Protection - IP-20, Sensor type- HF inbuilt integral occupancy/movement sensor, sensor range- upto 5 mtrs(cone formation ), Dimming operation- default operation at 25% of the is rated value. On detection of motion, light output rises to 100% for upto 20 sec . in absence of otion switches back to default operation, LED life- upto 30,000 Hrs.Surge Protection- not less than 1KV.
Taking down old existing unserviceable recessed mounting/hanging light fittings and Supply and fix 1' x 4' LED luminaires CRCA housing, white powder coated, with polymer diffuser complete with all accessories suitable for recessed mounting 36 Watt, 240V, CDL/NW. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings or suspension wire of 1.5 mtr is included (02 nos) for hanging with ceiling surfaces by fastener bolt as per site requirement and as specified and directed by Engr-in-Charge.
Taking down old unserviceable ceiling fan of any size/Make and deposite to MES store, Supply and fixing of ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified.
Taking down deterioted louvers and supply and fix new louvers, fixed type made out of 1.6 mm GI sheet with horizontal ventilation, bending into shape of size 45cmx45cm(outer) with 20x3mm flat iron base of size 45cmx45cm complete by providing of fixing arrangement for louvers upto 5th floor of including rate all as specified and directed by Engr-in-Charge.
S & F in repair junction box of size not less than 4x4 inch with connector encloser, 3 terminal/ PVC/ polycarbonate, isolated body including taking out old one.
S&F building security light bracket bend to shape made as required of 25/32mm dia, GI pipe light grade fixed to pole/ Wall including M&L for fixing with the help of flat iron clamp with the help of nuts and bolts for fixing of building security light fitting on the wall complete after taking out old U/S one all as specified and as directed.
Taking out Old, U/s one Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Note :- GI bracket shall be measured and paid seperately.
S & F in replacement with Analog Timelite distribution board 16A, 3 pole, 230 Volt with contactor, relay and prewired with Analog time switch 3P Module, 24 hours program, programmable every 15 min., backup of 100 hours, current capacity 16A for ON/OFF controlling of security lights and including taking out old unserviceable complete all as specified and directed
M & L for DLP trunking system of size 80x50mm fixing on wall Complete including taking down old DLP system with all accesories all as specified and directed. Note : Cover and fittings shall be measured and paid seperately.
M & L for DLP trunking system of size 105x50mm fixing on wall Complete including taking down old DLP system with all accesories all as specified and directed. Note : Cover and fittings shall be measured and paid seperately.
M & L for DLP trunking system of size 150x50mm fixing on wall Complete including taking down old DLP system with all accesories all as specified and directed. Note : Cover and fittings shall be measured and paid seperately.
M & L for flexible cover of size 65mm for DLP trunking Complete all as specified and directed.
M & L for flexible cover of size 85mm for DLP trunking Complete all as specified and directed.
M & L for flexible cover of size 130mm for DLP trunking Complete all as specified and directed.
M & L for Base joint for DLP trunking Complete all as specified and directed.
M & L for cover joint of size 65mm for DLP trunking Complete all as specified and directed.
M & L for cover joint of size 85mm for DLP trunking Complete all as specified and directed.
M & L for cover joint of size 130mm for DLP trunking Complete all as specified and directed.
M & L for 90 degree flat angle for 80x50 mm DLP trunking Complete all as specified and directed.
M & L for 90 degree flat angle for 105x50 mm DLP trunking Complete all as specified and directed.
M & L for 90 degree flat angle for 150x50 mm DLP trunking Complete all as specified and directed.
M & L for internal angle adj 80-100 degree for DLP trunking Complete all as specified and directed.
M & L for external angle adj 85-120 degree for DLP trunking Complete all as specified and directed.
M & L for clip on partition for DLP trunking Complete all as specified and directed.
M & L for separation partition for DLP trunking Complete all as specified and directed.
M & L for left or right end for 80x50 mm DLP trunking Complete all as specified and directed.
M & L for left or right end for 105x50 mm DLP trunking Complete all as specified and directed.
M & L for left or right end for 150x50 mm DLP trunking Complete all as specified and directed.
Taking out old existing unarranged submain cables/communications cable/conduits/casing caping from wall surfaces and keep a side and refixing the same after making good of wall surfaces under cable trunking/trays complete all as specified and directed.
M&L for submain wiring with PVC insulated, PVC sheathed, armoured, FRLS 1100 V grade, 3 core 10 sqmm stranded copper conductor fixed on wall roof/duct complete and connecting from TPN DB to SPN DBs with glands including taking out existing damaged cables complete all as specified and directed.
Taking down old existing userviceable recessed mounting light fittings and Supply and fix 2' x 2' LED lumination, CRAC housing with efficient optics ensuring perfectly uniform illumination, with polymet diffuser complete with all accessories suitable for recessed mounting 36 Watt, 240V, CDL/NW. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F>0.95, THD<20% mounting light fittings as specified and directed by Engr-in-Charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
Tenderdocuments.pdf
Tender Documents • 0.77 MB
BOQ_844623.xls
BOQ • 1.53 MB
Download all tender documents and submit your bid