Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.2 CrAccepted-AOC | ₹6.2 Cr | 1 | Accepted-AOC L-1 |
| 2 | 2₹6.7 Cr+₹49.3 L (7.95%)Rejected-Finance A 3 332 SECTOR 08 ROHINI DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | ₹6.7 Cr+₹49.3 L (7.95%) | 2 | Rejected-Finance L-2 |
| Sl No | Description | Qty | Unit | VARDHMAN ENGINEERING WORKS L1 | CREATIVE ENTREPRENEURS LLP L2 |
|---|---|---|---|---|---|
| 1.01 | Site survey, Design, Detailed Engineering, Supply of Materials, Installation, Testing and Commissioning of Sacrificial Anode Cathodic Protection (SACP) System for UG 3LPE Coated MS Pipeline of Internal dia-1600mm to control external Corrosion on underground or submerged metallic Piping system,Anode bed drillingand installation, cable termination/connections, pipeline coating condition syrvey( CIPSand DCVG) and also accommodation and vehicle for Specialised team.The work should be done for the complete pipe length of 130 m. as per ISO 15589-1:2015 and NACE SP0169 or any other releveant IS Codes complete in all respect as per satisfaction of the Engineer-in -charge.(Rates excluding GST) | 1 | Job | 8,84,350 ₹8,84,350 | 7,00,000 ₹7,00,000 Lowest |
| 1.02 | Earth Work and Rock Cutting Extra rates for quantities of works, executed: Note :- The extra percentage rate is applicable in respect of
each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment,
shall be the depth measured from the sub soil water level up to the centre of gravity of the qty executed in difficult conditions. The depth shall be
reckoned correct to 0.10 m, 0.05 m or more shall be taken as 0.10 m and less than 0.05 m ignored.
2 In or under foul position, including pumping out water as required , through rate 25% | 32,946.38 | meter depth | 19.5 ₹6,42,454.47 Lowest | 35 ₹11,53,123.41 |
| 1.03 | Providing, fixing, and commisstoning of Cast Iron (CI) Slulce Gate 1800mm x 1800mm with frame conforming to
1S: 13349 (latest revision), Operatlon: Manual (To be upgraded with Electrie Operatlon), with S.S. 304 Grade Spindle and Seatiug Faces, D.l. Wedge Block with S.S. AISI 304/CF8 Lining with all accessories Including Lift Nut, Fastners, Extension Spindle, Gulde Bracket,Coupling ete, Operated with 7-8 m load complete tn all respect up to the entire satisfaction of Engineer-In-Charge. | 3 | Each | 10,50,000 ₹31,50,000 | 6,25,000 ₹18,75,000 Lowest |
| 1.04 | Providing and applying 406 micron epoxy coating on the inner and outside surface of steel/MS pipes as per IS 3589 and ISO 21809 and relevant specifications, including surface preparation, cleaning and all incidental works complete in all respects. | 2,597.4 | Sqm | 373 ₹9,68,830.2 Lowest | 650 ₹16,88,310 |
Tender Value
₹6.6 Cr
EMD Value
₹13.3 L
Closing Date
13 Jul 2026, 12:00 pmClosed
VIJAY KUMAR BHAGOTIA
W.S. Divn. No. II Rewari
Trenchless crossing of the MS pipe/Rising Main through NHAI Highway,DFCCcoridor,Railway crossing,Roads and other arrangements for disposal of storm water from HSIIDC Bawal to Sahibi River catchment area.
2026_HRY_530756_1
2026F431984A 2D0B 422D 9F0D DD7B0FF4B784137IRR
Open Tender
Civil Works
Works
90 days
KHALIAWAS
3 documents required · 3 mandatory
₹20,000
₹13.3 L
Yes
WS division no two rewari
9 Sept 2026
22 Jun 2026
13 Jul 2026
22 Jun 2026
13 Jul 2026
22 Jun 2026
22 Jun 2026 - 24 Jun 2026
6 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Site survey, Design, Detailed Engineering, Supply of Materials, Installation, Testing and Commissioning of Sacrificial Anode Cathodic Protection (SACP) System for UG 3LPE Coated MS Pipeline of Internal dia-1600mm to control external Corrosion on underground or submerged metallic Piping system,Anode bed drillingand installation, cable termination/connections, pipeline coating condition syrvey( CIPSand DCVG) and also accommodation and vehicle for Specialised team.The work should be done for the complete pipe length of 130 m. as per ISO 15589-1:2015 and NACE SP0169 or any other releveant IS Codes complete in all respect as per satisfaction of the Engineer-in -charge.(Rates excluding GST) | 1 | Job | 0.16 | ₹0.16 |
| 1.02 | Earth Work and Rock Cutting Extra rates for quantities of works, executed: Note :- The extra percentage rate is applicable in respect of
each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment,
shall be the depth measured from the sub soil water level up to the centre of gravity of the qty executed in difficult conditions. The depth shall be
reckoned correct to 0.10 m, 0.05 m or more shall be taken as 0.10 m and less than 0.05 m ignored.
2 In or under foul position, including pumping out water as required , through rate 25% | 32,946.38 | meter depth | - | - |
| 1.03 | Providing, fixing, and commisstoning of Cast Iron (CI) Slulce Gate 1800mm x 1800mm with frame conforming to
1S: 13349 (latest revision), Operatlon: Manual (To be upgraded with Electrie Operatlon), with S.S. 304 Grade Spindle and Seatiug Faces, D.l. Wedge Block with S.S. AISI 304/CF8 Lining with all accessories Including Lift Nut, Fastners, Extension Spindle, Gulde Bracket,Coupling ete, Operated with 7-8 m load complete tn all respect up to the entire satisfaction of Engineer-In-Charge. | 3 | Each | 0.74 | ₹2.23 |
| 1.04 | Providing and applying 406 micron epoxy coating on the inner and outside surface of steel/MS pipes as per IS 3589 and ISO 21809 and relevant specifications, including surface preparation, cleaning and all incidental works complete in all respects. | 2,597.4 | Sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
BOQ_609803.xls
BOQ • 0.33 MB
AD0169368.pdf
Additional Documents • 1.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .