Tender for execution of work with material and illumination of monument installation of high mast for National Flag at Chanderi Fort Chanderi

Supply with transpotation at site of polygonal shap 15 mtr High mast pole (BPP/Utkarsh) with its accessories. Mast shaft shall be in two section, (7and 8 mt each) made from H.T. Steel of grade IS 2062 grade E350 / BSEN10025,S355JO hot dip galvanised as per BS- EN ISO1461 and suitable for wind speed 180 km/hr as per IS 875(part III) It should also included acc. for hight mast including head fame, two continuas steel wire rope 6mm diamete ( Grade AISI 316), minimum 45 mt long having Load bracking capicty minimum 2200 kg and wire rope for balance wt minimum 17 mt RMT ( 3 runs ) and 26 RMT (1run). Door and flange as per IS 2062 E250 tailing cable,, double drum winch galvanised lantern carriage arrangement suitable for 6 nos. luminaries installation symmetrically and its control gear box, motor, manual operating handle, motor mounting plate, L staper , Lightening arrester , Junction box, including foundation acc. the mast shall have an intigral power tools installed inside the base compartment for its operation. Luminaries wiring matrials including in the mast supply price. Technical Specification. Bottom 410 mm, top- 150 mm plate thiickness 5mm Top and 6 mm bottom and 20 side poligons cross section of Mast . circumferential belts section only base plate and shaft size of opening and door at base is 900X300 mm . and diameter of base plate minimum 630 mm and its thiockness minimum 30 mm with E-250grade of steel as IS 2062 .Minimum 12 Nos foundation bolts and 740 mm PCD of foundation bolts required . The TS 600 mm type bolts of 30 mm diameter with 1000 mm length of hightensil steel (600N/psqm ) grade foundation bolts. Cap details as per drawing.

Provision for earth work in excavation as per design and drawing / site conditions or as directed by the EIC

Provision for PCC 1:2:4 as per design and drawing / site conditions or as directed by the EIC

Flooring area :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Provision for providing and laying of suitable shallow foundation with 1:1.5:3 or M20 grade RCC for the high mast considering the safe soil bearing capasity at site as 10T/sqm. At 2X2 mit. Depth with all materials and labour charges (as per drawing)

Provision for providing reinforcement as per bar bending schedule

Provision for Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Erection of 15 mt m high mast with all acc with the help of suitable equipments or with the help of modern engineering practices

Supplying and erection of LED avition obstruction light Lumainair ( Bajaj 110731)

Supplying and fixing double door MS feeder piller box with near the high mast tower

Providing the following component ( switching acc.) inside the fidder piller including internal wiring all. Complete for autometic , timely OFF/ON for operating of (6 to 8 nos) 180 LED lighgting fitting. i)63 A 4 pole MCB isolater 1 no. ii)240 V contractor- 1 no. iii) Day dial timer (GIC)- 1 no iv) By pass switch- 1 no v) outlet Terminal - 2 nos. vi) Starter for moter operation (Forward and Revers direction )- 1no

Sullpy of LED flood light fixture (CG/Model- LSFO- 150 W- CLD/60 or Surya Make 180 W)

Supplying and erection of Earthing station with 50 mm dia. GI pipes 3.65 mm thick, 3M long and 1no. 4 SWG G.I wire 4 M long, 13mm dia, 80 mm long G.I bolt double washers, nuts, S&F 15 mm dia G.I pipe protection , to be field with bitumen, partly under ground and partly above above ground level driven to an avarage depth 3.65 m below the ground level including excavation of soil

Supplying and drawing 4 core 10 sqm pvc insulated and scheathed alluminium conductor armoured cable through under ground

Supplying and fixing 32A, 450 TPN main switch on iron frame on wall and making connection (Standered make)

S & F 32A Kit kat fuse on wooden board

supply and Instalation of Indian National Flag 12X8 feet 100% Knitted polyster with rainforce super strong Nilyon Webbing on all three side and Rope /Toggle sleeve complete as per rebalent IS code .

Provision for base plates and bolts as specified by the EIC

Stone work in plain ashlar in super structure upto floor five level in stainless steel bars / flat fixed with lead cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.One face dressed

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement Mortar 1:6

40 mm to 50 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. White Sand Stone

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in?charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Section of Hallow pipe for Railing is 50mm.

Invertors in battery combo for 200Ah tubular battery with trolley

Power cable 3 core copper 2.5 mm squre reputed make

Provision for material and labour for PU painting on flag mast shaft over a coating of each primer coat etc

Provision for hiring of Tri colour decoration with Par light / façade light LED RGB 35 watt including necessary wiring framing and tripod stands (80 LED lights per day for 13 days )

Provision for 5 Kva diesel generator for power back up with fuel and operator

Drone videography/photography of event as and when required for two days

Transportation Charges Mislenious material as and when required

SUDERSHAN ENGINEERING WORKS