REPAIR TO ROOF TREATMENT/PLUMBING SANITARY FITTINGS PVC JOINERY AND PERIODICAL SERVICE IN CERTAIN BLDGS AT RUPA GACHHAM BIRPUR AND DUKHAMPANI AREA OF AGE B/R II UNDER GE 859 EWS

Amount

Dismantling plain or corrugated steel sheeting of any thickness as in roof covering complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated MS sheeting with two corrugation side lap fixed with L type, J type or cranked hooks bolts in roofs,wall etc with gde of zinc coating 275 complete all as specified and directed.

S&F plain galvanised MS steel sheeting 0.8 mm thick in ridge,hips etc with gde of zinc coating 275 complete all as specified and directed.

Refixing old CGI sheet received from dismantling from Srl Item No. 1 here-in-before complete all as specified and directed.

M&L for preparing new galvanised surfaces to receive painting, by coating mordant solution including washing and cleaning etc, and applying two coats of synthetic enamel paint to steel surfaces over a coat of red oxide zinc chrome primer over 10cm girth or width complete all as specified and directed.

Demolition of cement concrete in floors n.exc 15 cm thick in ground floor (below or ground level) and in any position complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding including backing coat, removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Material and labour for 10mm thick rendering in cement mortar(1:4) on brick or concrete wall surfaces as backing coat for fixing tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for 15mm thick screed bed in cement mortar (1:6) for laying floor finish complete all as specified and directed.

M&L for 7 to 8mm thick ( area of each tile exc. 0.06 sqm but not exc. 0.11 sqm) non skid White tiles in floor etc. set and jointed in neat cement slurry and pointed in white cement to match the shade complete all as specified and directed.

M&L for 7 to 8mm thick ( area of each tile exc. 0.11 sqm but not exc. 0.18 sqm) non skid White tiles in floor etc. set and jointed in neat cement slurry and pointed in white cement to match the shade complete all as specified and directed.

Demolition of AC pipes 100mm dia complete all as specified and directed.

S&F PVC (SWR) pipes single sockted 110mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single sockted 75 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius, with access door 110mm dia complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius, with access door 75mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each (Without taking off shutters from the frame) including iron mongeries complete all as specified and directed.

Supply and fix flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 30mm thick solid panel PVC door shutter consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour C channel having a PVC strip of 20mm width stuck inside with complete all as specified and directed. solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as the gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supply and fixing in the frame in the site as per specification and drawing.

Running welding in repairs Exc 6 mm but n exc 9 mm complete all as specified and directed.

Supply and fix 100mm long MS butt hinge medium weight cold rolled. complete all as specified and directed.

Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section complete all as specified and directed.

Supply and fix 150mm size aluminium anodized handle fabricated type complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F floor door stopper of alumiium alloy body and tongue, n.exc 140 mm overall length of cover plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S&F 3mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

Material and labour for preparation of surface of wood and wood based materials over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Gun metal 15mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore CP pillar cock, with capsten head, chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repair bib cock brass 15mm bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe repairs complete all as specified and directed.

S&F in repair brass stop valve 15mm bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe repairs complete all as specified and directed.

S&F repairs Vitreous China squatting pan, "Orissa" pattern, size 580 x440 mm white, with integral foot rest (excluding flusing cistern and flush pipe) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white complete all as specified and directed.

S&F in repairs 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including pipe chain and plug, CI brackets complete all as specified and directed.

S&F in repair 40mm bore LDPE pipes of pressure rating 6kgf/sq.cm complete all as specified and directed.

S&F in repair 15mm size with PTMT nuts PVC connecting pipe 450 mm long complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.

Refixing 15 mm old steel tubing and connections in new or old position (wall, ceiling, floors, etc) complete all as specified and directed.

Refixing 20mm old steel tubing and connections in new or old position (wall, ceiling, floors, etc) complete all as specified and directed.

Dismantling of water tanks exc 250 Ltrs & n.exc 500Ltrs capacity complete all as specified and directed.

Supply and fix polyethylene water storage tank of 500 ltrs capacity rotational moulded (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 2004 complete all as specified and directed.

S&F in repair 15 mm bore PVC bip tap standard of PTMT any colour screwed, for iron pipe and fixed. (Minimum weight 15 mm=90 gms/20 mm-125 gms) complete all as specified and directed.

S&F Grating doom 125 mm dia with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed.

S&F Grating doom 100 mm dia with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed.

Demolition of precast block walling built in cement mortar complete all as specified and directed.

M&L for precast PCC 1:3:6 type C1 using 20 mm graded aggregates as in block masonry with solid blocks exc 10 cm in width and set in CM 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick on block masonry in CM 1:6 complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and Fix in repair plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as sub base for laying floor tiles complete all as specified and directed.

Material and labour for taking down of existing tarfelt and bituminous compounds in roof of any description from roof or terracing, roughening surfaces of old concrete surface by picking up,sweeping, cleaning and washing down with water to remove dust etc providing 15mm thick screed bed or bedding layer of cement mortar (1:4) for laying waterproofing membrane and finishing surface even and smooth without using extra cement and providing waterproofing treatment over smooth finished surfaces after applying one coat of cold bituminous primer at 0.30 ltrs / Sqm ,hot bitumen 85/25 @ 1.2 kgs /Sqm, laying APP polymer, modified , non-woven polyster mat,reinforced membrane, 3mm thick (min) weighing 3.50 Kg/Sqm with surface finish of white mineral ,by torch application method , with minimum 75mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying one coat of bituminous based solar reflective aluminium paint @ 100Gms /Sqm over APP modified membrane complete all as specified and directed.(APP Make : STP /Texsa India Ltd)

M&L for preparing of old plastered or un plastered surface of walls and applying one coat of white wash complete all as specified and directed.

M&L preparing of old plastered or un plastered surface of ceiling and applying one coats of white wash complete all as specified and directed.

M&L for preparation of old distempered surfaces by washing rubbing down & stopping and applying one coat of Oil Bound Distemper on walls including cornices etc all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of external wall including brooming down with steel wire brushing and applying one coat of cement base paint on external wall complete all as specified and directed.

M&L for complete removal of existing treatment of external wall including brooming down with steel wire brushing and applying two coat of cement base paint over a coat of chalk white priming coat complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for previously untreated steel surface and applying two coat of synthetic enamel over a coat of red oxide zinc chrome primer complete all as specified & directed.

M/S ASHOK CONSTRUCTION

D.P. Traders

M/S POLAR AGENCIES

M/S R.N ENTERPRISE

M/S SM ANSARI

M/S SUNRISE CONSTRUCTION AND CO